Available knives

[Bill Siegle]

Got another cool Camp Knife utilizing some extra BK&T scales I have. This one is 1/4in 5160 with a cold blued finish. I used stainless steel hardware for the handle scales. The sheath is black Boltaron and will accommodate your large size Tek Lok or similar device. Overall it is 15 5/8in with a 10 1/16in blade tip to scales. The blade is 1 7/8in wide and it weighs in at 18oz. I’ve added a useful sharpening choil by leaving it squared off for fire steel scraping. My price is $375***sold***shipped in the USA.

 

[Bill Siegle]

I revisited an old pattern here and even gave it a nameThis is the Gator Bowie! The design is a mix of Bowie and Bolo. Both of these are made from 1/4in 5160 with cold blued finish. The blades are flat ground with unsharpened swedge clips. Both have a fire steel scraper in the choil area. They both come with black Boltaron sheaths with reversible belt loops. Price for either one is $450 shipped in the US.

***sold***Smooth black G10 scales
10 9/16in blade tip to scales
15 15/16in overall
20oz

***sold***Textured black G10 scales
10 1/2in blade tip to scales
16 1/16in overall
22oz

 

[Bill Siegle]

I finished up this Gator Bowie this morning This is 1/4in 5160 with natural canvas Micarta scales. The Gator is 16 1/8in overall with a 10 5/8in blade tip to scales. It weighs in at 23oz. The blade has been cold blued and the swedge is unsharpened. I’ve added a ferro rod scraper to the choil. The sheath is black Boltaron with a reversible belt loop. The price is $450***sold*** shipped in the US.

 

[1Warrior]

I finished up this Gator Bowie this morning This is 1/4in 5160 with natural canvas Micarta scales. The Gator is 16 1/8in overall with a 10 5/8in blade tip to scales. It weighs in at 23oz. The blade has been cold blued and the swedge is unsharpened. I’ve added a ferro rod scraper to the choil. The sheath is black Boltaron with a reversible belt loop. The price is $450 shipped in the US.

View attachment 2408453View attachment 2408454View attachment 2408455

Sweet blade Bill! I sent you an email. Please check it. Thanks brother!

-Brian (Longrifle)

 

[Bill Siegle]

Here’s a cool small Bowie Knife I’ve made. Originally it was a blank I’d cut and immediately hated. I finally found a way to use it in a way that works very well. Inspired by some of Fred Perrin’s work, I went with a short scale on the handle with a large finger choil. It really feels great in my hand I made this Bowie from .200in thick 5160. The scales are textured black G10. The sheath is black Boltaron with a reversible belt loop. Overall it is 10 9/16in. The blade is 6 7/8in tip to scales. Weight is a super easy to carry 8oz! The cold blued blade has flat grinds. The swedge isn’t sharpened. The price is $300***sold*** shipped in the US.

 

[1Warrior]

Another sweet looking Bowie! Amazing!

 

[fishiker]

Overall it is 10 9/16in. The blade is 6 7/8in tip to scales

One of the things I like about your knives is the fact that you consider a knife that size small, great work as usual.

 

[Bill Siegle]

Here is a new design out of the shop The concept was inspired by the hero knife from the Jurassic World movies A compact but powerful utility knife for anything you might face I’m really happy with how they turned out! I have two available today. One in black G10***sold***and one maroon/black G10***sold***.Both are made from cold blued 1/4in 5160. Sheaths are black Boltaron and will ship with belt loops(not shown). Overall they are 10 11/16in. The blades are 5 5/8in tip to scales. Each one weighs 12oz. The price is $350 each shipped in the USA.

 

[Bill Siegle]

Here’s another Big Blade out of the shop! I’ve named this pattern the Reaver Cutlass!!!! It is 24 11/16in overall with a 14 1/2in blade tip to scales. The blade is made from cold blued 1/4in 5160. The bevels are flat ground and ready to cut The scales are natural canvas Micarta attached with epoxy and flared stainless steel tube fasteners. The black Boltaron blade cover will keep the blade protected and will accommodate a large size Tek Lok or similar device. The Reaver Cutlass weighs in at 2lbs 4oz. The price is $650***sold***shipped in the US.

 

[Leviathan Arms]

I’ll take the Jurassic with black G10 if still available

 

[Jetlau3111]

Here is a new design out of the shop The concept was inspired by the hero knife from the Jurassic World movies A compact but powerful utility knife for anything you might face I’m really happy with how they turned out! I have two available today. One in black G10 and one maroon/black G10. Both are made from cold blued 1/4in 5160. Sheaths are black Boltaron and will ship with belt loops(not shown). Overall they are 10 11/16in. The blades are 5 5/8in tip to scales. Each one weighs 12oz. The price is $350 each shipped in the USA.


View attachment 2436905View attachment 2436906View attachment 2436907

View attachment 2436908View attachment 2436909

Bill I like the thumb ramps you added to the sheaths .

 

[luethge]

I’ll take the Jurassic with black G10 if still available

Thank you !! . You saved me from myself

 

[shooter11b]

Here’s another Big Blade out of the shop! I’ve named this pattern the Reaver Cutlass!!!! It is 24 11/16in overall with a 14 1/2in blade tip to scales. The blade is made from cold blued 1/4in 5160. The bevels are flat ground and ready to cut The scales are natural canvas Micarta attached with epoxy and flared stainless steel tube fasteners. The black Boltaron blade cover will keep the blade protected and will accommodate a large size Tek Lok or similar device. The Reaver Cutlass weighs in at 2lbs 4oz. The price is $650***sold***shipped in the US.


View attachment 2438472View attachment 2438473View attachment 2438474View attachment 2438475View attachment 2438476

WOW. Bummed I missed that one!

 

[Hammer67]

Bill - I'll take the maroon/blk Jurassic, thanks.

 

[PolRoger]

Bill,

I like the overall size of your new Jurassic Hiker pattern!

I was watching your f/s post but unfortunately the timing was not particular good for me to add another knife to the collection.

Just a thought... But I hope that you would consider offering up a Jurassic in the slightly thinner .200" 5160 stock that you sometime use?

I think a thinner stock Jurassic would pair up very nicely with my larger .250" Grizzly and Anytime/Anywhere Bolo patterns that I'm using.

 

[LAG3]

Bill, that Reaver Cutlass is amazing!!!

 

[Bill Siegle]

Here is a full feature Jurassic Hiker I finished today. It has a 1/4in thick cold blued 5160 blade with a tapered tang. The black G10 scales are hand contoured and then given a tree bark texture. It rides in a black Boltaron sheath with a reversible belt loop. It weighs in at 12oz. Overall it is 10 11/16in with a 5 3/4in blade tip to scales. The price is $400***sold***shipped in the US.

 

[Bill Siegle]

Here are three available pieces! One Mike’s Knife and two Combat style knives I prototyped this past week. All come with black Boltaron sheaths with reversible belt loops. Prices include US shipping

Black G10 Combat $400***sold***
13oz, 7 3/16in blade tip to scales, 12 11/16in overall, blued 1/4in 5160, tree bark texture scales, semi sharp false edge, and tapered tang.

Natural Canvas Micarta Combat $400***sold***
13oz, 7 1/4in blade tip to scales, 12 13/16in overall, blued 1/4in 5160, semi sharp false edge, and a tapered tang.

Mike’s Knife $300***sold***
Black G10 scales, .200in thick 5160, blued finish, tree bark texture scales, 9oz, 5in blade tip to scales, unsharpened false edge, and 9 5/8in overall.

 

[Bill Siegle]

Here’s a very cool Machete I’ve made I started with 1/4in 5160 and natural canvas Micarta and started removing a LOT of material to reveal this cool blade! The flat ground blade has fullers ground in on both sides. The blade has been cold blued. Overall it is 19 13/16in long. The blade is 14 5/8in long tip to scales. The swedge is semi sharp for about 1/3rd its length. I was able to get the weight down to a very manageable 23oz The sheath is black Boltaron with a reversible belt loop. The sheath will also accommodate a large size Tek Lok. My price is $650***sold*** shipped in the US for this one of a kind Machete.

***Polar Bear Camp Knife in pics has already sold***

 

[Bill Siegle]

Here’s a Polar Bear Camp Knife in .200in thick 5160 with a cold blued finish. Scales are maroon/black G10 with tree bark texture. It’s a great secure grip texture without being too abrasive Overall it is 11 1/4in. The blade is 6 1/4in tip to scales. This Polar Bear won’t drag you down either at 12oz. The sheath is black Boltaron with a reversible belt loop for left or right carry. The price is $350***sold***shipped in the US.