Available knives

I have rehashed my Ninja pattern into this more traditional style blade and I love it!!! I used .200in thick 5160 with a blued finish. The bevels are flat saber ground on both sides. The scales are black G10 with flared stainless steel tube fasteners. The sheath is black Boltaron with a reversible belt loop. Overall it is 11 1/4in with a 6 1/4in blade tip to scales. The Ninja weighs in at 12oz. The price is $325***sold***shipped in the US.

IMG_4523.jpegIMG_4524.jpegIMG_4522.jpegIMG_4525.jpeg
 
Last edited:
Recently finished up these two JEST Bolos👍 One is a straight style blade and the other is a curved blade. Both are made from 1/4in 5160 with a cold blued finish. Both Bolos also use natural canvas Micarta for scales. Sheaths are black Boltaron and will have reversible belt loops added prior to shipping. The price for either one is $425 shipped in the US.

Curved JEST Bolo(left in pics)***SOLD***
17 1/2in overall
11 1/2in blade tip to scales
21oz

Straight JEST Bolo(right in pics)***sold***
17 1/16in overall
11 5/8in blade tip to scales
20oz


IMG_4665.jpegIMG_4666.jpegIMG_4667.jpegIMG_4668.jpeg
 
Last edited:
This a a new design based on my JEST Bolo blade mated with a Polar Bear handle😎 I’m including the original prototype knife too in this sale. This is my current “If I only had one” knife. A large but still very easy to carry/pack blade that works in most every scenario I personally could see myself getting into requiring a knife.
All of these are made from 1/4in 5160 with cold blued finish. Sheaths are black Boltaron with reversible belt loops(to be attached later👍). The price for each one is $400 shipped in the US.

****black G10 is the only one available****

Prototype Bug Out***sold*** is 14in overall with a 9in blade(tip to scales). Weight is 14oz. Tapered tang and blade has wide fullers. Scales are black G10 with a rough rasp texture on their surfaces.

Natural canvas Micarta***sold*** and Black G10***sold***Bug Outs are 15in overall with 9 7/8in blades(tips to scales). Weight of each is 18oz. The tangs have been drilled out for weight reduction and balance.


IMG_4669.jpegIMG_4670.jpegIMG_4672.jpegIMG_4671.jpeg
 
Last edited:
Bill Siegle said:
Recently finished up these two JEST Bolos👍 One is a straight style blade and the other is a curved blade. Both are made from 1/4in 5160 with a cold blued finish. Both Bolos also use natural canvas Micarta for scales. Sheaths are black Boltaron and will have reversible belt loops added prior to shipping. The price for either one is $425 shipped in the US.

Curved JEST Bolo(left in pics)
17 1/2in overall
11 1/2in blade tip to scales
21oz

Straight JEST Bolo(right in pics)
17 1/16in overall
11 5/8in blade tip to scales
20oz


View attachment 2491857View attachment 2491858View attachment 2491859View attachment 2491860left in pics)
Click to expand...

Curved Jest Bolo (Left in pics) - I'll take it!
 
This Polar Bear Camp Knife is made from 1/4in 5160 with black G10 scales. The cold blued blade is flat ground and 6 3/16in tip to scales. Overall the Polar Bear is 11 1/4in and weighs 12oz. I have tapered the tang on this one and contoured the scales for a nice fit in the paw. The sheath is black Boltaron with a reversible belt loop and will also accommodate a large size Tek Lok. My price on this Polar Bear is $375***sold***shipped in the US.


IMG_4681.jpegIMG_4682.jpegIMG_4683.jpegIMG_4684.jpegIMG_4685.jpeg
 
Last edited:
Here’s the latest from the shop! A medium size Just Right Bolo! 😁 I went a little shorter on the blade with this one at 7 5/16in(tip to scales). Overall it is 12 1/8in long. The cold blued blade is made from 1/4in 5160 and had a tapered tang. Weight is a very easy to carry and use 14oz👍 The scales are black G10. The sheath is black Boltaron and will ship with a reversible belt loop(not shown). The price is $400***sold***shipped in the US.

IMG_4700.jpegIMG_4701.jpegIMG_4702.jpegIMG_4703.jpeg
 
Last edited:
Bill Siegle said:
View attachment 2450723View attachment 2450724View attachment 2450725View attachment 2450726View attachment 2450727Here is a full feature Jurassic Hiker I finished today. It has a 1/4in thick cold blued 5160 blade with a tapered tang. The black G10 scales are hand contoured and then given a tree bark texture. It rides in a black Boltaron sheath with a reversible belt loop. It weighs in at 12oz. Overall it is 10 11/16in with a 5 3/4in blade tip to scales. The price is $400***sold***shipped in the US.
Click to expand...
That's REALLY nice. The dual taper is a nice touch!
 
I’ve put together another Just Right Bolo! One of my favorite patterns for sure👍 Nothing too fancy or extreme just a simple design that works great! This one is 15 5/8 overall with a 10 5/8in blade tip to scales. This Just Right Bolo weighs in at 21oz. It is made from cold blued 1/4in 5160 with natural canvas Micarta scales which are attached with slow cure epoxy and flared stainless steel tube fasteners. The sheath is black Boltaron with a belt loop that works for left or right carry. The sheath will also accommodate a large size Tek Lok or similar device. The price is $400***sold***shipped in the US.

IMG_5129.jpegIMG_5130.jpegIMG_5132.jpegIMG_5131.jpeg
 
Last edited:
I was recently inspired by the old Al Mar SERE fixed blades and went about making my own design for a SERE blade. I wanted something cool but ultimately useful and I’m very happy with how this turned out😎 I started with 1/4in 5160 with my usual differential heat treat. The scales are black G10 attached with epoxy and flared stainless steel tube fasteners. I’ve added some traction grooves to the G10 for a secure but not abrasive grip. The blade has been flat ground with a bit of distal taper. Also the tang has been drilled out to reduce weight to 15oz. I’ve added an unsharpened swedge to the tip to aid “poking” but not tear up a baton or cause issues with any pesky laws against dagger types. Overall the SERE is 13 1/8in. The blade is 8in tip to scales. The sheath is black Boltaron with a reversible belt loop. The price is $400***sold*** shipped in the USA.

IMG_5143.jpegIMG_5144.jpegIMG_5145.jpeg
 
Last edited:
Here’s a cool piece I’ve come up with using BK&T scales! 1/4in thick 5160 with a cold blued finish. Stainless steel hardware. The blade is 8 1/4in long tip to scales. Overall the knife is 13 3/4in long. I added an unsharpened swedge. Weight is 19oz. The sheath is black Boltaron and will accommodate a large size Tek Lok or similar device. The price is $325***sold***shipped in the US.

IMG_5150.jpegIMG_5151.jpegIMG_5149.jpeg
 
Last edited:
Here’s the latest iteration of my Whychus Bowie! This one in natural canvas Micarta and 1/4in 5160. The blade has my usual differential heat treat and has been cold blued. I’ve added an unsharpened false edge and a fire steel scraper to the blade. The scales have some nice contours for a comfortable grip in many positions. The sheath is my usual affair of black molded Boltaron with a reversible belt loop for left or right carry. The sheath will also accommodate a large size Tek Lok.

Price is $400***sold***shipped in the US
14oz
7 1/4in blade tip to scales
12 3/4in overall

IMG_5186.jpegIMG_5187.jpegIMG_5188.jpegIMG_5189.jpeg
 
Last edited:
Here’s a cool camp or combat blade inspired by Phill Hartsfield. Not a direct copy but definitely inspired by his Zahid Special model and his style. 1/4in 5160 blade with saber ground bevels. The blade has a Hartsfield style finish too😁 The scales are natural canvas Micarta attached with epoxy and flared stainless steel tube fasteners. The sheath is black Boltaron with a reversible belt loop.

$375 ***sold***shipped in the US
20oz
13 1/8in overall
8 1/8in blade tip to scales

IMG_5215.jpegIMG_5216.jpegIMG_5217.jpegIMG_5218.jpeg
 
Last edited:
I have one of my Grizzly Camp Knives available 👍 This one has a cold blued 1/4in 5160 blade. The scales are natural G10 attached with epoxy and flared stainless steel tube fasteners. The sheath is taco style black Boltaron with a reversible belt loop.

$400***sold***shipped in the US
12 7/8in overall
7 5/8in blade tip to scales
18oz
IMG_5093.jpegIMG_5094.jpegIMG_5095.jpeg
 
Last edited:
Here is a new design out of the shop! I was channeling my inner Al Mar as I wanted to make something along the lines of his SERE concept without actually copying his designs. I think this is a killer design. It’s basically a utility camp knife with a little bit O mean added😎 All of these are made from 1/4in 5160 with a differential heat treat and cold blued blades. The scales are black G10 attached with epoxy and flared stainless steel tube fasteners. I ground in grooves on the sides of the scales for a more secure and comfortable grip surface. It has a finger groove effect without sacrificing any possible grip positions. The spines have thumb notches and unsharpened swedges. Sheaths are black Boltaron with reversible belt loops for left or right carry.

Large SERE***sold***
15 1/8in overall
10 1/8in blade tip to scale
17oz
$400 shipped in the US

Medium SERE***sold***
13 1/8in overall
8 5/16in blade tip to scale
16oz
$380 shipped in the US

Small SERE***sold***
11 5/8in overall
6 3/4in blade tip to scale
14oz
$380 shipped in the US

IMG_5254.jpegIMG_5255.jpegIMG_5256.jpegIMG_5257.jpeg
 
Last edited:
You must log in or register to reply here.
Back
Top