Traded.
Up for trade is a used Benchmade Griptilian. I am the original owner and bought this new four months ago. The handles are gray G10 and the blade is 20CV. This was more of a weekend user for me and saw light use - cardboard, paper, cord, etc. I have not taken the knife apart.
As you can see in the pictures, the knife is used and most of the wear is on the pocket clip. There are a couple of light scratches on the blade. One of the standoff's, as shown in the pictures, has a scuff. Blade is centered. There just a hint of side to side play and I didn't spend much time dialing it in. Deployment is smooth and the blade is just shy of dropping freely to the closed position.
I resharpened the knife once and ended up shaving a few degrees off (lowered) the edge; I used a DMT aligner and finished on a fine DMT stone. The blade angle towards the tip on the left side is slightly wider than the right side which can be seen in the pictures as well. I'm not sure if this was from the original grind or from the aligner.
Knife comes with the original box and everything seen in the pictures. Feel free to ask any questions or if you need a specific picture, let me know. I usually ship USPS Priority Insured unless a different method is requested. I won't call any trade completed until both sides are happy. For trades, I'm fine with used as long as it wasn't abused...Email or PM is best.
- Spyderco M4 Paramilitary or non-S30V version
- Spyderco Caly 3 or 3.5
- Spyderco Manix 2
- Spyderco Stretch 2
- Spyderco Sage 1, 5
- Spyderco Chaparral
- Similar to the above
I'd consider other Spyderco models but I'd like to stick with just Spyderco. Plain edge only please. Also looking for a Sharpmaker. I have a user Fenix RC09 in another thread that can be added.
Up for trade is a used Benchmade Griptilian. I am the original owner and bought this new four months ago. The handles are gray G10 and the blade is 20CV. This was more of a weekend user for me and saw light use - cardboard, paper, cord, etc. I have not taken the knife apart.
As you can see in the pictures, the knife is used and most of the wear is on the pocket clip. There are a couple of light scratches on the blade. One of the standoff's, as shown in the pictures, has a scuff. Blade is centered. There just a hint of side to side play and I didn't spend much time dialing it in. Deployment is smooth and the blade is just shy of dropping freely to the closed position.
I resharpened the knife once and ended up shaving a few degrees off (lowered) the edge; I used a DMT aligner and finished on a fine DMT stone. The blade angle towards the tip on the left side is slightly wider than the right side which can be seen in the pictures as well. I'm not sure if this was from the original grind or from the aligner.
Knife comes with the original box and everything seen in the pictures. Feel free to ask any questions or if you need a specific picture, let me know. I usually ship USPS Priority Insured unless a different method is requested. I won't call any trade completed until both sides are happy. For trades, I'm fine with used as long as it wasn't abused...Email or PM is best.
- Spyderco M4 Paramilitary or non-S30V version
- Spyderco Caly 3 or 3.5
- Spyderco Manix 2
- Spyderco Stretch 2
- Spyderco Sage 1, 5
- Spyderco Chaparral
- Similar to the above
I'd consider other Spyderco models but I'd like to stick with just Spyderco. Plain edge only please. Also looking for a Sharpmaker. I have a user Fenix RC09 in another thread that can be added.
Last edited:
