- Joined
- Sep 8, 2011
- Messages
- 2,697
Got a few to trade. U.S. trades only. Know your local laws please.
These don't get too much carry time these days so they're going up here. I'm in no rush to let them go so I will be a little picky. I'd prefer multiples from my end for one of yours but,
ALL OFFERS ARE WELCOME, never know when I'll be surprised. Offers other than knives welcome as well. If you've got something I'm interested I can send more photos. Email(preferred) or pm for offers and/or questions.
I'm interested in fixed blades preferably from our knife makers here on the forum but also interested in a few productions as well (namely ZT 0100 and Spyderco Lum Tanto fixed blade with burgundy scales). Overall length 6.5 to maybe 10in. Nothing over 3/16s thick. Right around 8in is my sweet spot with a blade to handle ratio similar to the zt 0121.
Also interested in folders. Not too many that I want mostly a newer model Ummnummzaan or a Benchmade Forums Rift. Mostly between 2.8in and 4in blades.
The knives
Bm 53- I'm the original owner but I traded it away and ended up trading back for it for something(gotta love this place huh?) When it came back he had put a great near mirror edge on it, sharper than I could get it. I've since dropped it on the edge there is some rolling right near the tip, but not on the tip and some about an inch lower than that. If you're a proficient sharpener I'll let you handle it, if not I'll sharpen it up before I send it out. Up to you. Flips very smoothly. Latch locks solid in the open position but some wiggle in closed. Will not open on accident though at all. Very minor stains near the tang pins, I'll try to clean it up before i send it out. Box and papers included. I will be Extremely picky with this one, more so than the others.
Leethal Cutlery wharncliff- received in a trade. W2 steel i believe micarta scales.Still lightly used and carried a little bit. Shows some marks on the scales and kydex marks on the blade. Slight ding in the blade about 1/4 in from the tip. Haven't sharpened it because I'm not too familiar with convex edges. Comes with two sheaths, neck sheath and sheath with belt loop. The loop will fit maybe 1.25 in wide and less than 3/16 thick belt. My belt is about 3/16 thick and 1.5 wide, if it fit I surely would be keeping this one.
Izula with tkc scales- well used still in good shape though. Sanded the coating off most of the blade just not under the scales all the way. Needs a sharpening, I could do it if requested. Comes with sheath and clip plate.
Protech Rockeye- bought new from the exchange I believe I'm the third owner. I've carried it 3-4 times used it once in the yard. Has a scratch in the coating from not being careful around a stone. Also hit the blade right in the middle. Nearly sharpened it out but not all the way. Besides that still in excellent shape.
TRADEDBenchmade Adamas- received in a trade used. Shows wear on the grind lines of the blade, barely any on the scales. Ever so slightly off center rock solid lock up. Perfect Axis action. Clip has a rubber slip on it from previous owner, I haven't taken it off so not sure how the clip looks. Also have a bunch of spare screws for it.
ZT is gone.
These don't get too much carry time these days so they're going up here. I'm in no rush to let them go so I will be a little picky. I'd prefer multiples from my end for one of yours but,
ALL OFFERS ARE WELCOME, never know when I'll be surprised. Offers other than knives welcome as well. If you've got something I'm interested I can send more photos. Email(preferred) or pm for offers and/or questions.
I'm interested in fixed blades preferably from our knife makers here on the forum but also interested in a few productions as well (namely ZT 0100 and Spyderco Lum Tanto fixed blade with burgundy scales). Overall length 6.5 to maybe 10in. Nothing over 3/16s thick. Right around 8in is my sweet spot with a blade to handle ratio similar to the zt 0121.
Also interested in folders. Not too many that I want mostly a newer model Ummnummzaan or a Benchmade Forums Rift. Mostly between 2.8in and 4in blades.
The knives
Bm 53- I'm the original owner but I traded it away and ended up trading back for it for something(gotta love this place huh?) When it came back he had put a great near mirror edge on it, sharper than I could get it. I've since dropped it on the edge there is some rolling right near the tip, but not on the tip and some about an inch lower than that. If you're a proficient sharpener I'll let you handle it, if not I'll sharpen it up before I send it out. Up to you. Flips very smoothly. Latch locks solid in the open position but some wiggle in closed. Will not open on accident though at all. Very minor stains near the tang pins, I'll try to clean it up before i send it out. Box and papers included. I will be Extremely picky with this one, more so than the others.
Leethal Cutlery wharncliff- received in a trade. W2 steel i believe micarta scales.Still lightly used and carried a little bit. Shows some marks on the scales and kydex marks on the blade. Slight ding in the blade about 1/4 in from the tip. Haven't sharpened it because I'm not too familiar with convex edges. Comes with two sheaths, neck sheath and sheath with belt loop. The loop will fit maybe 1.25 in wide and less than 3/16 thick belt. My belt is about 3/16 thick and 1.5 wide, if it fit I surely would be keeping this one.
Izula with tkc scales- well used still in good shape though. Sanded the coating off most of the blade just not under the scales all the way. Needs a sharpening, I could do it if requested. Comes with sheath and clip plate.
Protech Rockeye- bought new from the exchange I believe I'm the third owner. I've carried it 3-4 times used it once in the yard. Has a scratch in the coating from not being careful around a stone. Also hit the blade right in the middle. Nearly sharpened it out but not all the way. Besides that still in excellent shape.
TRADEDBenchmade Adamas- received in a trade used. Shows wear on the grind lines of the blade, barely any on the scales. Ever so slightly off center rock solid lock up. Perfect Axis action. Clip has a rubber slip on it from previous owner, I haven't taken it off so not sure how the clip looks. Also have a bunch of spare screws for it.
ZT is gone.
Last edited:
