- Joined
- Apr 3, 2011
- Messages
- 6,011
I no longer need these parts after replacing them, so I DLC'd them with on of my batches thinking someone may want to snag them. Parts includes are the blade, thumb stud, all screws (including clip screws), pivot nut and screw, axis bar, and standoffs. No clip or stop pin included.
I'm only charging the price I normally would for DLC, so basically the parts are free. Markings were removed on the blade during the blasting process (prep for satin DLC) but this is an OEM S30V blade from a 940-2, and OEM hardware. Asking $120 TYD for all, payment to be made via credit/debit card using my normal online invoicing service (Wave online invoicing).
* that's a spec of dust on the edge of the blade, not a blem. I sharpened after the coating. the mark in the center of the axis bar is from racking since that's a wear area anyway.
I'm only charging the price I normally would for DLC, so basically the parts are free. Markings were removed on the blade during the blasting process (prep for satin DLC) but this is an OEM S30V blade from a 940-2, and OEM hardware. Asking $120 TYD for all, payment to be made via credit/debit card using my normal online invoicing service (Wave online invoicing).
* that's a spec of dust on the edge of the blade, not a blem. I sharpened after the coating. the mark in the center of the axis bar is from racking since that's a wear area anyway.