Jerry Busse
Moderator
- Joined
- Aug 20, 1999
- Messages
- 11,729
BladeShowGanzaaaa 2012 Ordering Procedures, Pictures and Pricing
The BladeShowGanzaaaa will be Monday July 16, 2012 between 9:00-10:00 pm Eastern Time. If the forums are shut down due to an overload in traffic, as has happened in past Extravaganzaaaas. . . I will continue to attempt posting the "Go" button until I am able to get through on one of the 4 Busse Knife Group forums.
1) http://www.bladeforums.com/forums/forumdisplay.php/713-Busse-Combat-Knives
2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives
3) http://www.swampratknifeworks.com/ratchat/
4) http://www.bladeforums.com/forums/forumdisplay.php/778-Swamp-Rat-Knives
EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you cannot get on to see whether or not the "GO" Button has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern! Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" button before that time. . . . If the automatic "GO" is used then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!
1) Some of the knives being offered are one-of-a-kinds and others are extremely limited in number. So, be sure to include second, third, and fourth choices in your email as the pieces you request might be sold out before you get your emails in!
2) We need to know the total number of knives you want to purchase. You must tell us HOW MANY of each knife you want from the list you send us. You can also include how much you want to spend. For example, you might list 5 knives and tell us that you do not want to exceed $3,000.00. Please list the knives in your order of priority.
3) You must include the knife's picture number (For example: 13, 15, etc. . . ) and pricing in your order.
4) You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.
5) Email both Lexi at lexi@bussecombat.com and Jerry at jerry@bussecombat.com AFTER the "GO" Button is posted by me on one of the Busse Knife Group Forums.
********WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" in red under my name if it is on Bladeforums) and will bring up MANY false threads from the past in order to get others to order BEFORE the actual BladeShowGanzaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.********
6) Orders are taken in the order in which we receive them.
**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been sent out, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******
Lexi, Pokey and the other girls will need a few days to sort this thing out. Do not expect any notifications to be sent out until the following Monday, July 23, 2012.
So, rev up your mouse and get ready for a wild one!!!
Good luck gang. . . . It looks like it's gonna be BladeShowGanzaaaa of Atlantian Proportions!!!!!!
1) Pork Shank Satin Finish with Coyote Brown/Blk G10 $332.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
2) Ratmandu Satin finish with G10 Bolster and Stabilized Bone $288.95
Blade Length: 5.375"
Overall Length: 10.375"
Blade Width:1.375
Blade Thickness: .160"
Grind: Full Height Flat
Steel: SR101
3) Rodent 4 Variant $128.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .1875"
Grind: Saber
Steel: SR101
4) Scrap Max 460 Satin Finish with Resiprene C $89.95
Blade Length: 4.5"
Overall Length: 9.1875"
Blade Width: 1"
Blade Thickness: .095"
Grind: Full Height Flat
Steel: Elmax
5) SYKCO 511 Desert Sage with Tan Resiprene C Handles $89.95
Blade Length: 5.5"
Overall Length: 10"
Blade Width:1.375"
Blade Thickness: .1875"
Grind: Slightly Convex Saber
Steel: SR101
6) Ratmandu Variant Satin Finish with Red/Blk G10 $218.95
Blade Length: 5.25"
Overall Length: 10.25"
Blade Width: 1.375"
Blade Thickness: .160"
Grind: Flat
Steel: SR101
7) Scrap Max 340 Satin Finish with Resiprene C $74.95
Blade Length: 3.375"
Overall Length: 8.25"
Blade Width: 1.1875"
Blade Thickness: .095"
Grind: Full Height Flat
Steel: Elmax
8) Rodent 4 Satin finish with Red/Black G10 $168.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
9) Pork Shank Satin Finish with Ivory G10 Handles $317.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
10) Ratmandu Satin with Dyed Stabilized Bone $258.95
Blade Length: 5.25"
Overall Length: 10.1875"
Blade Width: 1.25"
Blade Thickness: .165"
Grind: Saber
Steel: SR101
11) Rodent 4 Satin finish with Tan Canvas $148.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
12) Pork Shank Satin Finish with Black Paper $297.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
13) Rodent Waki with Serrations and Orange/Green G10 $538.95
Blade Length: 16.75"
Overall Length: 27.25"
Blade Width: 1.375"
Blade Thickness: .1875"
Grind: Convex
Steel: SR101
14) SYCKO 711 Desert Sage with Tan Resiprene C Handles $139.95
Blade Length: 7.375"
Overall Length: 12.5"
Blade Width: 1.65"
Blade Thickness: .25"
Grind: Ultra Convex Saber
Steel: SR101
15) Rodent 4 Satin finish with Black Canvas $ 148.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
16) Pork Shank Double Cut with Black Canvas Handles $257.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
17) Ratmandu Variant Satin Finish with Blue/Black G10 $218.95
Blade Length: 5.25"
Overall Length: 10.25"
Blade Width:1.375"
Blade Thickness: .160"
Grind: Flat
Steel: SR101
18) Pork Shank Satin Finish with Jungle Storm G10 $332.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
19) Rodent 4 Satin Finish with Orange/Black G10 $168.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
20) Ratmandu Variant Satin Finish with Orange/Green G10 $218.95
Blade Length: 5.25"
Overall Length: 10.25"
Blade Width: 1.375"
Blade Thickness: .160"
Grind: Flat
Steel: SR101
21) Rodent Rucki/Waki Hybrid with Serrations and Orange/Green G10 $498.95
Blade Length: 16.5"
Overall Length: 26.5"
Blade Width: 1.375"
Blade Thickness: .1875"
Grind: Convex
Steel: SR101
22) SYKCO 311 Desert Sage with Tan Resiprene C Handles $69.95
Blade Length: 3.5"
Overall Length: 8"
Blade Width: 1.25"
Blade Thickness: .25"
Grind: Flat Saber
Steel: SR101
23) Pork Shank Double Cut with Tan Canvas Handles $257.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
24) Rodent 9 Desert Sage with Tan Canvas Handles $198.95
Blade Length: 9.5"
Overall Length: 15.25"
Blade Width: 1.625"
Blade Thickness: .25"
Grind: Ultra Convex Saber Bevel
Steel: SR101
25) Kill-Devil Sniper Hawk. . . This is the model that was D-Tested by Spec Ops Teams in Afghanistan. It can be seen here taking a full blown beating by the crew from Wauseon.
http://www.youtube.com/watch?v=osa9eT5MJlQ
It features a Desert Sage coating with enough tan paracord to wrap your own handle.... $188.95
Cutting Edge Length: 3.125"
Head Width: 7"
Spike Length: 3.125"
Overall Length: 15.5"
26) Optional kydex sheath for the Kill-Devil Hawk from Mashed Cat Outfitters is available direct from us and will be shipped with your Kill-Devil Hawk for $49.95
The BladeShowGanzaaaa will be Monday July 16, 2012 between 9:00-10:00 pm Eastern Time. If the forums are shut down due to an overload in traffic, as has happened in past Extravaganzaaaas. . . I will continue to attempt posting the "Go" button until I am able to get through on one of the 4 Busse Knife Group forums.
1) http://www.bladeforums.com/forums/forumdisplay.php/713-Busse-Combat-Knives
2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives
3) http://www.swampratknifeworks.com/ratchat/
4) http://www.bladeforums.com/forums/forumdisplay.php/778-Swamp-Rat-Knives
EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you cannot get on to see whether or not the "GO" Button has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern! Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" button before that time. . . . If the automatic "GO" is used then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!
1) Some of the knives being offered are one-of-a-kinds and others are extremely limited in number. So, be sure to include second, third, and fourth choices in your email as the pieces you request might be sold out before you get your emails in!
2) We need to know the total number of knives you want to purchase. You must tell us HOW MANY of each knife you want from the list you send us. You can also include how much you want to spend. For example, you might list 5 knives and tell us that you do not want to exceed $3,000.00. Please list the knives in your order of priority.
3) You must include the knife's picture number (For example: 13, 15, etc. . . ) and pricing in your order.
4) You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.
5) Email both Lexi at lexi@bussecombat.com and Jerry at jerry@bussecombat.com AFTER the "GO" Button is posted by me on one of the Busse Knife Group Forums.
********WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" in red under my name if it is on Bladeforums) and will bring up MANY false threads from the past in order to get others to order BEFORE the actual BladeShowGanzaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.********
6) Orders are taken in the order in which we receive them.
**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been sent out, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******
Lexi, Pokey and the other girls will need a few days to sort this thing out. Do not expect any notifications to be sent out until the following Monday, July 23, 2012.
So, rev up your mouse and get ready for a wild one!!!
Good luck gang. . . . It looks like it's gonna be BladeShowGanzaaaa of Atlantian Proportions!!!!!!
1) Pork Shank Satin Finish with Coyote Brown/Blk G10 $332.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
2) Ratmandu Satin finish with G10 Bolster and Stabilized Bone $288.95
Blade Length: 5.375"
Overall Length: 10.375"
Blade Width:1.375
Blade Thickness: .160"
Grind: Full Height Flat
Steel: SR101
3) Rodent 4 Variant $128.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .1875"
Grind: Saber
Steel: SR101
4) Scrap Max 460 Satin Finish with Resiprene C $89.95
Blade Length: 4.5"
Overall Length: 9.1875"
Blade Width: 1"
Blade Thickness: .095"
Grind: Full Height Flat
Steel: Elmax
5) SYKCO 511 Desert Sage with Tan Resiprene C Handles $89.95
Blade Length: 5.5"
Overall Length: 10"
Blade Width:1.375"
Blade Thickness: .1875"
Grind: Slightly Convex Saber
Steel: SR101
6) Ratmandu Variant Satin Finish with Red/Blk G10 $218.95
Blade Length: 5.25"
Overall Length: 10.25"
Blade Width: 1.375"
Blade Thickness: .160"
Grind: Flat
Steel: SR101
7) Scrap Max 340 Satin Finish with Resiprene C $74.95
Blade Length: 3.375"
Overall Length: 8.25"
Blade Width: 1.1875"
Blade Thickness: .095"
Grind: Full Height Flat
Steel: Elmax
8) Rodent 4 Satin finish with Red/Black G10 $168.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
9) Pork Shank Satin Finish with Ivory G10 Handles $317.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
10) Ratmandu Satin with Dyed Stabilized Bone $258.95
Blade Length: 5.25"
Overall Length: 10.1875"
Blade Width: 1.25"
Blade Thickness: .165"
Grind: Saber
Steel: SR101
11) Rodent 4 Satin finish with Tan Canvas $148.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
12) Pork Shank Satin Finish with Black Paper $297.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
13) Rodent Waki with Serrations and Orange/Green G10 $538.95
Blade Length: 16.75"
Overall Length: 27.25"
Blade Width: 1.375"
Blade Thickness: .1875"
Grind: Convex
Steel: SR101
14) SYCKO 711 Desert Sage with Tan Resiprene C Handles $139.95
Blade Length: 7.375"
Overall Length: 12.5"
Blade Width: 1.65"
Blade Thickness: .25"
Grind: Ultra Convex Saber
Steel: SR101
15) Rodent 4 Satin finish with Black Canvas $ 148.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
16) Pork Shank Double Cut with Black Canvas Handles $257.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
17) Ratmandu Variant Satin Finish with Blue/Black G10 $218.95
Blade Length: 5.25"
Overall Length: 10.25"
Blade Width:1.375"
Blade Thickness: .160"
Grind: Flat
Steel: SR101
18) Pork Shank Satin Finish with Jungle Storm G10 $332.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
19) Rodent 4 Satin Finish with Orange/Black G10 $168.95
Blade Length: 4.5"
Overall Length: 9.375"
Blade Width: 1.25"
Blade Thickness: .180"
Grind: Full Height Flat
Steel: SR101
20) Ratmandu Variant Satin Finish with Orange/Green G10 $218.95
Blade Length: 5.25"
Overall Length: 10.25"
Blade Width: 1.375"
Blade Thickness: .160"
Grind: Flat
Steel: SR101
21) Rodent Rucki/Waki Hybrid with Serrations and Orange/Green G10 $498.95
Blade Length: 16.5"
Overall Length: 26.5"
Blade Width: 1.375"
Blade Thickness: .1875"
Grind: Convex
Steel: SR101
22) SYKCO 311 Desert Sage with Tan Resiprene C Handles $69.95
Blade Length: 3.5"
Overall Length: 8"
Blade Width: 1.25"
Blade Thickness: .25"
Grind: Flat Saber
Steel: SR101
23) Pork Shank Double Cut with Tan Canvas Handles $257.00
Blade Length: 5"
Overall Length: 9.875"
Blade Width:1"
Blade Thickness: .160"
Grind: Saber
Steel: INFI
24) Rodent 9 Desert Sage with Tan Canvas Handles $198.95
Blade Length: 9.5"
Overall Length: 15.25"
Blade Width: 1.625"
Blade Thickness: .25"
Grind: Ultra Convex Saber Bevel
Steel: SR101
25) Kill-Devil Sniper Hawk. . . This is the model that was D-Tested by Spec Ops Teams in Afghanistan. It can be seen here taking a full blown beating by the crew from Wauseon.
http://www.youtube.com/watch?v=osa9eT5MJlQ
It features a Desert Sage coating with enough tan paracord to wrap your own handle.... $188.95
Cutting Edge Length: 3.125"
Head Width: 7"
Spike Length: 3.125"
Overall Length: 15.5"
26) Optional kydex sheath for the Kill-Devil Hawk from Mashed Cat Outfitters is available direct from us and will be shipped with your Kill-Devil Hawk for $49.95
Last edited:
