I'm looking to make some trades. Any questions just ask. Some pictures knives have been traded and I will try to note them so there isn't any confusion. Very few have boxes, most are new unless notes.
Spyderco Mili, light user, no noticeable marks.
Colonial small Automatic, Blackie Collins design, new
Ontario MK3 MOD 0, factory original, this was a Navy Seal BUDS issue knife and shows wear. Edge is 3000 grit polished, razor sharp!
Next up some folders. Buck 110 thumbstud, Opinel 8 are traded, so is the Balisong. Top left Gerber's are a FFG/154CM and an ultra rare ATS34 Thumbstud model. Nearly all of these are unused without boxes.
Next batch is missing the 3 top left ZT/Kershaw/Kershaw, blue Endura is gone as well. The UKPKs are lightly used, Centofonte III is well used but nothing wrong with it and sharp enough to shave your face. I believe the rest are unused, might have boxes for a few.
Small custom made by ATS Knife works, now called Nivette Knives. This is one of his earliest pieces, a 3 finger EDC he called it. Cocobola scales with red liners. AEB-L acid etched and stone washed, heat treat done by Paul BOS. Sharpest knife I own I think, never been used. Blade is about 3.2", kydex neck sheath. Super comfy, nice knife!
Buck Small Game Avid, BOS 12c27mod, Cherry wood dymondwood. New with leather sheath.
Rare Kershaw Tom Veff Caper. Ultra thin, flexible AUS8A, Japanese made. Leather sheath, lightly used, lightning sharp. Really nice little blade. Cocobola scales, full tang.
Custom fixed blade. Italian made 440C blank made for David Yellowhorse. Full convex grind, tapered spine. Integrated bolster, blade and bolster are forged from 1 piece. Full tang. Cocobola scales with brass and mosiac pins added by NM knife maker Ron Moss as well as leather sheath. New, shows minor lines in mirror polish in the right lighting/angle. Sweet little Hunter!
Victorinox knives, Leathermans not available. Most are used, Swisschamp scales are getting bad/have cracks. All are complete. Hunter XT is new. Also have a Spartan in black, and Climber in black not pictured. Classic is missing toothpick/tweezers. NATO has worn off on GAK scale.
Cold Steel Pipehawk, Rifleman's Hawk and Spike Hawk. Customized by me. Sheaths done by other makers. Kydex on Pipehawk, premium super high quality leather on Rifleman's Hawk, get to rigged SOG Fasthawk sheath on Spike. Edges convexed and polished on KO Worksharp.
Custom CS GI Tanto. Vinegar etched, razor sharp. Scales professionally stippled by a Glock custom shop.
Not pictured is a Buck 620 Reaper in snakeskin scales with Ontario Gen II sheath. New. Also a Kabar Navy MKI with black Kraton handle, plain edge unused but I did put a 20° convex edge on with the KO Worksharp and wow is it scary sharp!
I'm open to tons of stuff. Knives, gear, lights, guns etc. My primary knife interests right now are Beckers (BK5, BK7, BK17, BK16, BK4, BK2, BK9). Spydercos fixed blades, Manix 2 and XL, PM2'S, etc. Cold Steels ( Recon 1 clip point PE, Master Hunter San Mai and 3v, Pendleton's in 3v, AK47 fixed blade, D2 Leatherneck, Voyager L or XL PE clip points, Code 4 PE clip etc...) Leathermans Rebar, Charge. BRKT, Ontario's in 5160, ESEE 5, 6, Junglas. Just some examples, I'm open to tons more, thinking about trying GEC as well, but I prefer blades over 3.5" usually in a pocket knife. Make an offer and thanks for looking!!
Had to update this because of ridiculous offers. If you intend to trade expect your trade to be of equal value. Look up the lowest Amazon price, or Ebay price.
If your within 10% preferably yours worth more, contact me. If your not, do not bother. I will only trade for equal or greater value unless I absolutely have to have it because I have an addiction to steel. Thanks
Spyderco Mili, light user, no noticeable marks.
Colonial small Automatic, Blackie Collins design, new
Ontario MK3 MOD 0, factory original, this was a Navy Seal BUDS issue knife and shows wear. Edge is 3000 grit polished, razor sharp!
Next up some folders. Buck 110 thumbstud, Opinel 8 are traded, so is the Balisong. Top left Gerber's are a FFG/154CM and an ultra rare ATS34 Thumbstud model. Nearly all of these are unused without boxes.
Next batch is missing the 3 top left ZT/Kershaw/Kershaw, blue Endura is gone as well. The UKPKs are lightly used, Centofonte III is well used but nothing wrong with it and sharp enough to shave your face. I believe the rest are unused, might have boxes for a few.
Small custom made by ATS Knife works, now called Nivette Knives. This is one of his earliest pieces, a 3 finger EDC he called it. Cocobola scales with red liners. AEB-L acid etched and stone washed, heat treat done by Paul BOS. Sharpest knife I own I think, never been used. Blade is about 3.2", kydex neck sheath. Super comfy, nice knife!
Buck Small Game Avid, BOS 12c27mod, Cherry wood dymondwood. New with leather sheath.
Rare Kershaw Tom Veff Caper. Ultra thin, flexible AUS8A, Japanese made. Leather sheath, lightly used, lightning sharp. Really nice little blade. Cocobola scales, full tang.
Custom fixed blade. Italian made 440C blank made for David Yellowhorse. Full convex grind, tapered spine. Integrated bolster, blade and bolster are forged from 1 piece. Full tang. Cocobola scales with brass and mosiac pins added by NM knife maker Ron Moss as well as leather sheath. New, shows minor lines in mirror polish in the right lighting/angle. Sweet little Hunter!
Victorinox knives, Leathermans not available. Most are used, Swisschamp scales are getting bad/have cracks. All are complete. Hunter XT is new. Also have a Spartan in black, and Climber in black not pictured. Classic is missing toothpick/tweezers. NATO has worn off on GAK scale.
Cold Steel Pipehawk, Rifleman's Hawk and Spike Hawk. Customized by me. Sheaths done by other makers. Kydex on Pipehawk, premium super high quality leather on Rifleman's Hawk, get to rigged SOG Fasthawk sheath on Spike. Edges convexed and polished on KO Worksharp.
Custom CS GI Tanto. Vinegar etched, razor sharp. Scales professionally stippled by a Glock custom shop.
Not pictured is a Buck 620 Reaper in snakeskin scales with Ontario Gen II sheath. New. Also a Kabar Navy MKI with black Kraton handle, plain edge unused but I did put a 20° convex edge on with the KO Worksharp and wow is it scary sharp!
I'm open to tons of stuff. Knives, gear, lights, guns etc. My primary knife interests right now are Beckers (BK5, BK7, BK17, BK16, BK4, BK2, BK9). Spydercos fixed blades, Manix 2 and XL, PM2'S, etc. Cold Steels ( Recon 1 clip point PE, Master Hunter San Mai and 3v, Pendleton's in 3v, AK47 fixed blade, D2 Leatherneck, Voyager L or XL PE clip points, Code 4 PE clip etc...) Leathermans Rebar, Charge. BRKT, Ontario's in 5160, ESEE 5, 6, Junglas. Just some examples, I'm open to tons more, thinking about trying GEC as well, but I prefer blades over 3.5" usually in a pocket knife. Make an offer and thanks for looking!!
Had to update this because of ridiculous offers. If you intend to trade expect your trade to be of equal value. Look up the lowest Amazon price, or Ebay price.
If your within 10% preferably yours worth more, contact me. If your not, do not bother. I will only trade for equal or greater value unless I absolutely have to have it because I have an addiction to steel. Thanks
Last edited:
