- Joined
- Dec 6, 2013
- Messages
- 2,782
1. Omnivore Bladeworks Americana- 1/4" 1095 blade steel. Just a hair over 9". It's unused, uncarried and unsharpened. Shows some sheath insertion marks. Comes with kydex sheath, no tek-lok. GONE!
2. Siegle custom- 7 1/2" blade made from 1/4" 5160 steel. Has been used, carried and sharpened. Great chopper or camp knife. Comes with sheath, no tek-lok. Gone!
3. Scrapyard Urban Regulator Drop point varient-7" Bright green cg blade, resiprene handle. Unused, uncarried and unsharpened. Comes with kydex sheath, no tek-lok
4. Busse Custom Shop Satin Jack Varient- 5" sage cg blade .15", Swedge is sharpened. Tigerhide scales. Has not been used, carried or sharpened.
5. Busse Custom Shop MOAB- Camo cg blade, tigerhide(i think) scales. Has not been used, sharpened or carried. It has been handled as can be seen on the scales. Comes with an opened backed kydex sheath with large tek-lok.
6.Swamprat Camp Tramp- Black cg blade, resiprene handles. Has not been used, carried or sharpened. Has some smoothing of the blade coating, spots on the edge(can be seen in pic). Comes with a kydex sheath, no tek-lok.
7.R. Mok recurve fighter- 6" handrubbed s30v blade. Red and black g10. Purchased new, have not used, carried or used. Comes with a very nice leather sheath by R. Mok.
8.CRKT Hi Jinx #216- Lightly carried, doesnt appear to be used. Never sharpened. Comes with box and leather(pleather) pouch.
9.Red Horse Knives War Pig-3.5" 3/16" thick d2 stonewashed(more of an acid wash) blade. Lock side is 3/16" anodized ti, other side is a 1/4" thick slab of micarta. Unused, uncarried and unsharpened. Ti scale shows some scratches from previous owners wedding ring. Comes with a soft pouch.
10. Brad Fairall Model #3- 3.75" handrubbed s30v recurve blade. Has been carried, used and sharpened. Comes with two sets of scales. Has extra hardware(screws, washers). Comes with pouch.
11. Matt Cucchara Dorado Stage 2- 3.5" vg10 blade. Blue/copper anodized ti frame. Has been carried, used and sharpened. Good detent, extremely smooth.
12.Hinderer Wharnie- 3.5" s35vn blade. G10 scale is orange. Has been lightly carried, rarely used and never sharpened. Had a piece of a pine needle in the pivot, so it was disassembled and put back together. Has some light dings on one of the standoffs. Comes with box, plastic bag and peanuts.GONE!
13. Benchmade 51-4" d2 blade. Jewelled ti liners, g10 scales. It's not been carried, used or sharpened(as far as i can tell). Comes with box.
14. Benchmade 62- 4" d2 blade. Stainless handles. Unused, uncarried, unsharpened(as far as i can tell). Comes with box and sheath.
15. Three Sisters Forge Beast- 3" m390 blade, ti frame. Has been used, carried and sharpened.
Trade interest are:
Busse 9" and larger
Rmj Hawks
Winkler Hawks
Hardcore Hardware
American Tomahawk brand
Mummert Knives Hawks or axes
Miller Bros Blade Swords
Zombie Tools brand
Swamprat Crash Rat
Brous Blade
Olamic wayfarer in cts-xhp or 3v
Strider smf dgg or cc- no cpm154, s30v or cpm-s30v
Mid tech over built folders- Sniper Bladeworks etc
Mid tech flippers- Shirogorov, southard etc
Custom Flippers- direware, Phantom steel works, Doucette etc
Large choppers- Custom or high end like siegle
I reserve the right to do business with whomever i wish.
Cash can go either way
Multiples are ok, not going to trade a $500 blade for a $250 dollar one
Thanks for looking
USA only pls
2. Siegle custom- 7 1/2" blade made from 1/4" 5160 steel. Has been used, carried and sharpened. Great chopper or camp knife. Comes with sheath, no tek-lok. Gone!
3. Scrapyard Urban Regulator Drop point varient-7" Bright green cg blade, resiprene handle. Unused, uncarried and unsharpened. Comes with kydex sheath, no tek-lok
4. Busse Custom Shop Satin Jack Varient- 5" sage cg blade .15", Swedge is sharpened. Tigerhide scales. Has not been used, carried or sharpened.
5. Busse Custom Shop MOAB- Camo cg blade, tigerhide(i think) scales. Has not been used, sharpened or carried. It has been handled as can be seen on the scales. Comes with an opened backed kydex sheath with large tek-lok.
6.Swamprat Camp Tramp- Black cg blade, resiprene handles. Has not been used, carried or sharpened. Has some smoothing of the blade coating, spots on the edge(can be seen in pic). Comes with a kydex sheath, no tek-lok.
7.R. Mok recurve fighter- 6" handrubbed s30v blade. Red and black g10. Purchased new, have not used, carried or used. Comes with a very nice leather sheath by R. Mok.
8.CRKT Hi Jinx #216- Lightly carried, doesnt appear to be used. Never sharpened. Comes with box and leather(pleather) pouch.
9.Red Horse Knives War Pig-3.5" 3/16" thick d2 stonewashed(more of an acid wash) blade. Lock side is 3/16" anodized ti, other side is a 1/4" thick slab of micarta. Unused, uncarried and unsharpened. Ti scale shows some scratches from previous owners wedding ring. Comes with a soft pouch.
10. Brad Fairall Model #3- 3.75" handrubbed s30v recurve blade. Has been carried, used and sharpened. Comes with two sets of scales. Has extra hardware(screws, washers). Comes with pouch.
11. Matt Cucchara Dorado Stage 2- 3.5" vg10 blade. Blue/copper anodized ti frame. Has been carried, used and sharpened. Good detent, extremely smooth.
12.Hinderer Wharnie- 3.5" s35vn blade. G10 scale is orange. Has been lightly carried, rarely used and never sharpened. Had a piece of a pine needle in the pivot, so it was disassembled and put back together. Has some light dings on one of the standoffs. Comes with box, plastic bag and peanuts.GONE!
13. Benchmade 51-4" d2 blade. Jewelled ti liners, g10 scales. It's not been carried, used or sharpened(as far as i can tell). Comes with box.
14. Benchmade 62- 4" d2 blade. Stainless handles. Unused, uncarried, unsharpened(as far as i can tell). Comes with box and sheath.
15. Three Sisters Forge Beast- 3" m390 blade, ti frame. Has been used, carried and sharpened.
Trade interest are:
Busse 9" and larger
Rmj Hawks
Winkler Hawks
Hardcore Hardware
American Tomahawk brand
Mummert Knives Hawks or axes
Miller Bros Blade Swords
Zombie Tools brand
Swamprat Crash Rat
Brous Blade
Olamic wayfarer in cts-xhp or 3v
Strider smf dgg or cc- no cpm154, s30v or cpm-s30v
Mid tech over built folders- Sniper Bladeworks etc
Mid tech flippers- Shirogorov, southard etc
Custom Flippers- direware, Phantom steel works, Doucette etc
Large choppers- Custom or high end like siegle
I reserve the right to do business with whomever i wish.
Cash can go either way
Multiples are ok, not going to trade a $500 blade for a $250 dollar one
Thanks for looking
USA only pls
Last edited:
