CPM 10V Knives

BluntCut MetalWorks

BluntCut MetalWorks

Knifemaker / Craftsman / Service Provider
Feedback: +8 / =0 / -0
Joined
Apr 28, 2012
Messages
3,462
CWF HT Tuning and making 10V knives were fun. Edge of this highly wear resistant steel is biting pleasure to use. On the pain hand, hardened 10V ate 2x72 ceramic belts like they were free. These high hardness 10V are strong but more than tough enough to support slicing tasks.

Here is a 10V 67rc hunter knife in action - please aware, this knife has a bit thicker edge geometry than others.

[video=youtube_share;8pZmOrTbReQ]http://youtu.be/8pZmOrTbReQ[/video]

These knives carry 45 days unconditional 100% refund guarantee - just return more than 70% of the knife (either in one piece or pieces), even after you used it to hunt Nile's Croc. Rationally, these knives are slicers not pryer nor chopper.

*1 Got some stain after logo-etched, will clean before shipping.
*2 Pictures usually look better than in hand.
*3 Performance grade F&F - yes, there are imperfection hand made marks.

#1 Removed
0.102" thick, 1" wide, 4.5" edge, 8.5"OAL, hollow ground
CWF HT 65.5rc
Est bevel thickness: 0.009" at edge shoulder (behind edge thick), 0.020" at 0.25"
Natural Lao Olive Burl
Asking $Removed
jaKr7AWh.jpg

http://i.imgur.com/jaKr7AWh.jpg
http://i.imgur.com/vgl8OS2h.jpg
http://imgur.com/XaJRDRh

#2SOLD
0.062" thick, 7/8" wide, 4.25" edge, 8.75"OAL, FFG
CWF HT 67rc
Est bevel thickness: 0.006" at edge shoulder (behind edge thick), 0.020" at 0.25"
Natural Coolibah Burl
Asking $224 SOLDshipped - mini kydex sheath
eBv3ngCh.jpg

http://i.imgur.com/eBv3ngCh.jpg
http://i.imgur.com/9AFBjVth.jpg
http://i.imgur.com/l1zZjYxh.jpg?1

#3 SOLD
0.107" thick, 1.13" wide, 4" edge, 8.5"OAL, FG
CWF HT 67rc
Est bevel thickness: 0.005" at edge shoulder (behind edge thick), 0.028" at 0.25"
Natural Sindora Burl
Asking $260 shipped SOLD - std kydex shealth
S9TfGgKh.jpg

http://i.imgur.com/jDNwklwh.jpg?1
http://i.imgur.com/v1dE4zOh.jpg?1

Previous grind
6y28qJ5h.jpg


#4 Removed
0.106" thick, 1.125" wide, 4" edge, 8.5"OAL, FG
CWF HT 67rc
Est bevel thickness: 0.005" at edge shoulder (behind edge thick), 0.026" at 0.25"
Stabilized Lace Ramon Burl
Asking $Removed
M4smeRHh.jpg

http://i.imgur.com/wGmhnxKh.jpg?1
http://i.imgur.com/h1CEo9Rh.jpg?1

Previous grind
W4wJVCVh.jpg


#5 - SOLD
0.100" thick, 1.063" wide, 4" edge, 8.5"OAL, FFG
CWF HT 67rc
Est bevel thickness: 0.010" at edge shoulder (behind edge thick), 0.034" at 0.25"
Stabilized Chechen Burl
Asking $280 SOLD shipped - mini kydex shealth
iI5trW8h.jpg

http://i.imgur.com/iI5trW8h.jpg
http://i.imgur.com/2sVutN2h.jpg
http://i.imgur.com/oGnN6EXh.jpg?1

#6 - SOLD
0.105" thick, 1.070" wide, 4" edge, 8.5"OAL, FG, partial tang + 1.5" stick tang
CWF HT 68rc
Est bevel thickness: 0.011" at edge shoulder (behind edge thick), 0.040" at 0.25"
Black Linen Micarta
Asking $288 - SOLD shipped - std kydex shealth
7CxWd0yh.jpg

http://i.imgur.com/7CxWd0yh.jpg
http://i.imgur.com/3wFZd7Kh.jpg
http://i.imgur.com/a3W3RIfh.jpg?1

#7 Blade only - 15 days unmodified (except sharpening) refund guarantee
0.068" thick, 7/8" wide, 4.75" edge, 8.75"OAL, almost FFG rough 120 grit finished
CWF HT 68rc
pre-sharpen edge bevel thickness: 0.006", 0.028" at 0.25"
Asking $140 SPF shipped
oZUmBJhh.jpg


==Kydex Sheath==
Minimal - smallest dimension cover only the blade; won't scratch wood; in pocket carry - could draw knife from back pocket (w/o thumb push).

Standard - cover ~0.5" front part of the handle (with teklok holes) - conducive to wear on belt; blade/handle transition won't
catch/draw knife on accident.
 
Last edited:
I am so damn mad I don't have the funds available...
Figures I find the thread first too.

Good luck with the sale!
 
Thanks, Bill. You make fine knives... PM - I've some 10V 67rc &68rc blades but won't get to them for a long while.
NJBillK said:
I am so damn mad I don't have the funds available...
Figures I find the thread first too.

Good luck with the sale!
Click to expand...
 
Wow, beauties, should have checked computer when sleep walking, I am slipping.
Emailed and PM'd you, let me know your thoughts....

Great job Man,
Russ
 
Thanks, Bud! PM Replied.
Allo, is this the house of walking slipping flying expensive knives :p
mycough said:
Wow, beauties, should have checked computer when sleep walking, I am slipping.
Emailed and PM'd you, let me know your thoughts....

Great job Man,
Russ
Click to expand...
 
bluntcut said:
Thanks! Are you sure there is even room for one more tiny winy bit knife on your knives laden sled ;)
Click to expand...

The dogs are strong and they will be happier if I can cut up their snacks faster ;)
If not this batch then I'll be saving up for next time :)
 
Bluntcut-your video was incredible! More makers should aspire to this level of quality. If I had any money it would now belong to you. Mein Gott in Himmel. Please,please keep making these. Someday I might be able to obtain one. Do you take blood in trade? Your forum name is the biggest mis-nomer I've seen. Just wow. Do you ever sell knives without handle scales and sheaths?
Thanks, Neal
 
Thanks for your good words & encouragement. Please gmail me about blade only...
Blunt = straight/frank talk (but learned to be more cautious with expression w/o politician slick :D)
Cut = will try not to mince words

neal70 said:
Bluntcut-your video was incredible! More makers should aspire to this level of quality. If I had any money it would now belong to you. Mein Gott in Himmel. Please,please keep making these. Someday I might be able to obtain one. Do you take blood in trade? Your forum name is the biggest mis-nomer I've seen. Just wow. Do you ever sell knives without handle scales and sheaths?
Thanks, Neal
Click to expand...
 
You must log in or register to reply here.
Back
Top