- Joined
- Sep 17, 2012
- Messages
- 13,402
Good day BladeForums!
Looking to shake things up a bit. Sorry international folks but I'm going to keep this in the US only. Your laws are your responsibility to know.
Mainly looking for an Emerson Hatin or Tiger. Also would be interested in folders or fixed blades from our resident Forum Makers. Fixed blades, anything smaller than choppers preferred with knives at or under 8in overall being my sweet spot.
All offers are welcome, however I don't have any particular interest in balisongs, OTFs, or traditionals. Please keep offers to email or PM.
Now to the knives!
CRK Mnandi w/ Cocobolo Inlays Traded. Lightly used and in great shape. Subtle marks on the TI here and there. Great lockup with no blade play. Looks nearly centered, may sit just towards the presentation side. Comes with the box, tool, and CRK Grease. No birthcard or cloth.
Spyderco Hungarian. Gone. Lightly used. Slight marks on the bolsters and clip that are very hard to see and impossible to photograph. Solid lock up with no blade play. Sits just off center towards the presentation side. The blade has a good looking stonewash. No box.
Kershaw Knockout. Used but in great shape. Has some scratches and some paint rubbed off on clip. Some light scratches in the AL on the butt on some specs in the black anodizing on the handle. There is a little ding in the aluminum up by the stop pin. Solid lock up with no blade play. Sits just off center towards the presentation side. The lock bar was polished by the previous owner so its nice and shiny. Comes with the box.
Rebladed Emerson Commander. This thing is unique. It has an m390 blade made by Reese Weiland and was later shaped to its current state by Charlie Mike. The blade is thicker than standard Emersons so it does not have room for any washers. Still smooth though. Definitely the most used of the bunch but no where near abused. The tip is rolled a little bit but it will sharpen out. Some marks on the g10, pivot screw and the clip. Locks up solid with no blade play. The blade sits a little towards the clip side. No box nor the original blade/washers.
Three Sisters Forge Beast. Traded Lightly used as well. S35vn steel. Just a snail trail or two on the lock side. Very smooth with solid lock up and no blade play. Sits a little to the presentation side also. Comes with a Bradford knives box. It came to me in that so that's what it will go out in.
Any questions or request for more pictures don't hesitate to ask. Thanks!
Looking to shake things up a bit. Sorry international folks but I'm going to keep this in the US only. Your laws are your responsibility to know.
Mainly looking for an Emerson Hatin or Tiger. Also would be interested in folders or fixed blades from our resident Forum Makers. Fixed blades, anything smaller than choppers preferred with knives at or under 8in overall being my sweet spot.
All offers are welcome, however I don't have any particular interest in balisongs, OTFs, or traditionals. Please keep offers to email or PM.
Now to the knives!
CRK Mnandi w/ Cocobolo Inlays Traded. Lightly used and in great shape. Subtle marks on the TI here and there. Great lockup with no blade play. Looks nearly centered, may sit just towards the presentation side. Comes with the box, tool, and CRK Grease. No birthcard or cloth.
Spyderco Hungarian. Gone. Lightly used. Slight marks on the bolsters and clip that are very hard to see and impossible to photograph. Solid lock up with no blade play. Sits just off center towards the presentation side. The blade has a good looking stonewash. No box.
Kershaw Knockout. Used but in great shape. Has some scratches and some paint rubbed off on clip. Some light scratches in the AL on the butt on some specs in the black anodizing on the handle. There is a little ding in the aluminum up by the stop pin. Solid lock up with no blade play. Sits just off center towards the presentation side. The lock bar was polished by the previous owner so its nice and shiny. Comes with the box.
Rebladed Emerson Commander. This thing is unique. It has an m390 blade made by Reese Weiland and was later shaped to its current state by Charlie Mike. The blade is thicker than standard Emersons so it does not have room for any washers. Still smooth though. Definitely the most used of the bunch but no where near abused. The tip is rolled a little bit but it will sharpen out. Some marks on the g10, pivot screw and the clip. Locks up solid with no blade play. The blade sits a little towards the clip side. No box nor the original blade/washers.
Three Sisters Forge Beast. Traded Lightly used as well. S35vn steel. Just a snail trail or two on the lock side. Very smooth with solid lock up and no blade play. Sits a little to the presentation side also. Comes with a Bradford knives box. It came to me in that so that's what it will go out in.
Any questions or request for more pictures don't hesitate to ask. Thanks!
Last edited:
