PinkmagicK
Gold Member
- Joined
- Jun 22, 2014
- Messages
- 1,028
Link to pictures: http://m.imgur.com/a/3euKt
Robert, aka sakmodder, did all of the modifications, you can see his work on Instagram @robertjlessard. This is a fully customized Victorinox SAK, that I have carried and used only a few times for light tasks, knife is still sharp, saw works beautifully, and the scissors and pliers are tight and precise. I originally paid $345 for this one from Robert, the fit and finish/attention to detail he puts into these are phenomenal and really puts these classic little tools on another level. It originally started out as a Super Tinker. The scales are skelotonized smooth tumbled Titanium with a perfectly flush copper Victorinox cross inlayed on one side. The liners are polished brass that has started to develop a slight patina from handling. The tooth pick base is also polished brass as is the scissors pivot (although that part may be copper, not 100% sure). The tools are as follows, Knife/Saw/Bottle opener plus flat head/phillips driver/small flat head driver/Awl/Scissors/Pliers/Toothpick. It is now easily dissasembled for cleaning with torx screw construction. Phosfor bronze washers have been added where they need to be for smooth operation.
I will consider all offers/trades so feel free to send me any you may have! Thank you.
Robert, aka sakmodder, did all of the modifications, you can see his work on Instagram @robertjlessard. This is a fully customized Victorinox SAK, that I have carried and used only a few times for light tasks, knife is still sharp, saw works beautifully, and the scissors and pliers are tight and precise. I originally paid $345 for this one from Robert, the fit and finish/attention to detail he puts into these are phenomenal and really puts these classic little tools on another level. It originally started out as a Super Tinker. The scales are skelotonized smooth tumbled Titanium with a perfectly flush copper Victorinox cross inlayed on one side. The liners are polished brass that has started to develop a slight patina from handling. The tooth pick base is also polished brass as is the scissors pivot (although that part may be copper, not 100% sure). The tools are as follows, Knife/Saw/Bottle opener plus flat head/phillips driver/small flat head driver/Awl/Scissors/Pliers/Toothpick. It is now easily dissasembled for cleaning with torx screw construction. Phosfor bronze washers have been added where they need to be for smooth operation.
I will consider all offers/trades so feel free to send me any you may have! Thank you.
