Doug Ritter Knife News

Critter said:
If I’m not at the Camillus booth, ask to see the prototype RSK MkII/BK12...
Click to expand...
In the design of this and the Benchmade folder, did you specific a different geometry than the comparable Becker/Benchmade models (Companion/ Griptillian).

-Cliff
 
Cliff,

With regards the RSK MkI Benchmade folder, there is a very big difference due to the wider blade and higher grind. With the RSK MkII / BK12 it is very similar to the BK7/9. I didn't set out with a specific number in mind, rather we ended up where we did based on the design I can up with that dictated the higher grind and resultant narrower included angle.

Hope this explains.

Doug - remote London: COSPAS SARSAT JC
 
Thanks, did you have specifics for the edge tolerances as well, in terms of the thickness and angle you wanted it ground?

-Cliff
 
Doug, can you or somebody else please explain to a knife novice what "Variable Balance: Neutral or blade forward (Magic!)" means, specifically the "variable" part?

Thanks, Vince
 
Cliff,

Nope. Left it to the experienced engineers there to come up with the prototypes and then tested them to see how well it worked. If it didn't work, we'd fine tune those issues. In both instances it worked so well, I couldn't see any reason to mess with it. Beginner's luck or???? In any case, after considerable discussion with many makers and designers, I've decided that knife design is as much or more an art as a science. The old saw that if it looks right, you're generally on the right track, seems to hold. :D

Doug (remote London - COSPAS SARSAT JC)
 
Doug, with regard to the serrations, I read (possibly on your site) that if the user must have them, they'd probably be best placed on the point end, as opposed to the straight edge where they are most commonly found. Would it make sense to put serrations on the spine of the blade?

I bought a Linder bowie and it has serrations on the back of the blade. I find sawbacks basically useless, but thought the serrated edge was interesting. Does a serrated edge on the spine weaken the balde too much? Or, is it not ergonomically friendly for LE tasks?

BTW - I have 2 Ritters on the way. The mini yellow is part of the kit I ordered. THANK GOD someone finally figured out that the best knife in the world isn't worth a damn if you can't find it in the leaves!!
 
Hey Doug i didnt know you were around these parts as well. Good seein ya at Blade, did ya have a good time?
 
norad45 said:
Doug, can you or somebody else please explain to a knife novice what "Variable Balance: Neutral or blade forward (Magic!)" means, specifically the "variable" part?
Click to expand...
Neutral means the blade is balanced in the grip so it seems very light in hand. Blade forward puts the balance point ahead of the grip. Variable would mean you could change it, for example a hollow handle or grip slabs which could be filled with heavy shot would allow that.

-Cliff
 
norad45 said:
Doug, can you or somebody else please explain to a knife novice what "Variable Balance: Neutral or blade forward (Magic!)" means, specifically the "variable" part?
Click to expand...
Cliff nailed it, thanks. Some folks prefer a neutral balance, other prefer having blade forward. Using a very simple method, which I cannot yet reveal, we can offer both options in the same knife, allowing a user to adjust it to suit their own preference. This concept is not new, but our very simple, low cost and easy to use implimentation of it is, hopefully. We are in the process of doing the necessary deeper and more thorough intellectual property research as we speak.

Doug (remote London - COSPAS-SARSAT JC Meeting)
 
XGrip said:
Hey Doug i didnt know you were around these parts as well. Good seein ya at Blade, did ya have a good time?
Click to expand...
Given the very positive response to the new knives, I'd be hard pressed to have had a bad time. :D Was a pleasure meeting you and the others.

Doug (remote London - COSPAS-SARSAT JC Meeting)
 
josywales3 said:
Doug, with regard to the serrations, I read (possibly on your site) that if the user must have them, they'd probably be best placed on the point end, as opposed to the straight edge where they are most commonly found. Would it make sense to put serrations on the spine of the blade?

I bought a Linder bowie and it has serrations on the back of the blade. I find sawbacks basically useless, but thought the serrated edge was interesting. Does a serrated edge on the spine weaken the balde too much? Or, is it not ergonomically friendly for LE tasks? QUOTE]

We considered putting the serrations on the RSK Mk1 forward, but the marketing folks convinced me it would be a kiss of death. <shrug> Sometimes going against the grain isn't worth it. :eek:

Serrations on the spine is essentially a double edged balde and I am not a fan of for most normal use, including LE and especially for survival or utility use. Too much of a chance for hurting yourself, IMHO. Whether it would weaken the blade would depend on the design, but it would make it far less practical.

Doug (remote London - COSPAS-SARSAT JC Meeting)
Click to expand...
 
Thanks Doug.

Paul, no doubt. Being in a Marketing/IT/Analyst role, I say the RSK Mk1, Version 2.0 is due out...yes?



"Honey, when I die, sell my guns/knives for what they're worth and NOT what I told you I paid for them."
 
Cliff and Doug, thanks for the information. I'll be looking forward to hearing how you have accomplished it.

Regards, Vince
 
Geoff in Philly said:
My fingers are crossed...and TAPPING!
please give us a teaser on the unique features..... :p...a pithy "no" will be sufficient:)
Click to expand...
No.... :D Seriously, I've gotten a lot of that smelly stuff what comes out the south end of a north bound horse from others invovled for opening my big mouth, so I'm going to try and be a good boy for a while, sorry. You'll just have to remain frustrated for a little while longer...just like me. <~> Everything takes longer than anyone reasonably expects, but things are moving along.
 
hardheart said:
ok, need a BK12... now
Click to expand...
Sorry, we're aiming for early Fall for the 0170-6C steel version. Keeping my fingers crossed things go more or less smoothly for a change. <sigh>
 
You must log in or register to reply here.
Back
Top