ENDED - Thin and tough Carbon Steel EDC knives with Micarta scales and G10 liners

Status
Not open for further replies.

David Mary

pass the mustard - after you cut it
Moderator
Knifemaker / Craftsman / Service Provider
Feedback: +132 / =0 / -0
Joined
Jul 23, 2015
Messages
15,420
Good Friday evening my fellow knife enthusiasts! Here for your every day cutting pleasure are some broad bladed EDC knife from 1/8" 8670 steel, heat treated for me by local blacksmith Andy Pomorski. In the interest of efficiency for preparing this post, I show the specs for each knife in the photographs, where the knife and ruler are on the scale. I did of course tare the scale once the ruler was on it, so the weight you are seeing is the true weight of the knife. And for reference, the sheaths for these weigh in at about 1 oz each, give or take 0.2 oz. All handle material is micarta, and all liners are G10. I lightly rubbed them with mineral oil before photographing.

The geometry on all these is full height flat-vex, down to .016" behind the edge or less, with ~15° primary edge, and 20° microbevel. They all slice paper and shave arm hair.

Each knife will have a number according to its order of appearance, so if you would like to claim on, simply post here with "I'll take #___" and it will be easy to keep track of who gets what. After you post here, please also send me a PM or email to let me know which email address you would like me to send the PayPal invoice to. Price for each knife will be listed along with its number in the list, and will be payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense. Each knife after the first receives $15 off for combined shipping.

Thanks for looking, and have a great weekend one and all!

NOTE: I am going to keep the thread locked until all the photos are uploaded, since this will take multiple posts, and I will post once last time to state the thread is open. That way anyone wanting to grab one will know they have seen every knife being listed before they post. I expect the thread to open within the next half hour, so long as the server cooperates with my uploads.
 
Good Friday evening my fellow knife enthusiasts! Here for your every day cutting pleasure are some broad bladed EDC knife from 1/8" 8670 steel, heat treated for me by local blacksmith Andy Pomorski. In the interest of efficiency for preparing this post, I show the specs for each knife in the photographs, where the knife and ruler are on the scale. I did of course tare the scale once the ruler was on it, so the weight you are seeing is the true weight of the knife. And for reference, the sheaths for these weigh in at about 1 oz each, give or take 0.2 oz. All handle material is micarta, and all liners are G10. I lightly rubbed them with mineral oil before photographing.

The geometry on all these is full height flat-vex, down to .016" behind the edge or less, with ~15° primary edge, and 20° microbevel. They all slice paper and shave arm hair.

Each knife will have a number according to its order of appearance, so if you would like to claim on, simply post here with "I'll take #___" and it will be easy to keep track of who gets what. After you post here, please also send me a PM or email to let me know which email address you would like me to send the PayPal invoice to. Price for each knife will be listed along with its number in the list, and will be payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense. Each knife after the first receives $15 off for combined shipping.

Thanks for looking, and have a great weekend one and all!

NOTE: I am going to keep the thread locked until all the photos are uploaded, since this will take multiple posts, and I will post once last time to state the thread is open. That way anyone wanting to grab one will know they have seen every knife being listed before they post. I expect the thread to open within the next half hour, so long as the server cooperates with my uploads.
 
D Donny720 , I emailed you at the email address you provided in the thread, which I have redacted to protect you from spammers and scammers.
 
#5 and #8 are now SPF
 
Quick update for those of you who have purchased one or two of these: The mailman called me to advise me he will not be picking up from my location today due to the heavy snow deposit we received, and he will be by tomorrow instead. So I will provide tracking to each of you tomorrow. Thank you for your patience. :)
 
Status
Not open for further replies.
Back
Top