Etcher build question

Why not? They'd probably be worth more if they did. . . .Actually, that was just a jest for April 1. I'm actually planning on building an anodizing tank capable of doing titanium and aluminum. Are you a Devils fan?

Fletch Helical said:
Unless there are other uses for it (which there may be) I was only going to use it to etch my mark on the blades. I don't think you want your knives with my mark on them :D
Click to expand...
 
Yeah I like the Devils. I'm not a super hardcore follower of them but if you were to ask my favorite hockey team it would be them.
 
I just built an etcher using CC's schematics. Have double double checked everything twice, and it's still blowing fuses after three seconds of use.

The unit uses a 12v transformer, so will Mike LoGiudice's schematic still apply to my machine. I can run over to the store and grab a 25v if that will make things run smoother.

Danke,
Harlan
 
Last edited:
Fletch Helical said:
Yeah I like the Devils. I'm not a super hardcore follower of them but if you were to ask my favorite hockey team it would be them.
Click to expand...

Matt how did everything go? Did you get everything straightened out? I'm at Indian Georges this weekend if you want more input on anything. IG loves talking, so he'll answer any question you have.

Jeff
 
KB1SYV said:
For instance, the DPDT switch has 6 wires, but there is no numbering on it, so ow can you follow the schematic when you don't know which wire is what.

Jeff
Click to expand...


If you bought the part from radio shack it has the numbers on the back, you might want to try using a magnifying glass, they are tiny.

This is the number sequence from the back of the DPDT Switch.
1 4
2 5
3 6
 
KB1SYV said:
Matt how did everything go? Did you get everything straightened out? I'm at Indian Georges this weekend if you want more input on anything. IG loves talking, so he'll answer any question you have.

Jeff
Click to expand...


Yeah I spoke to Rusty, we broke out the crayons and a few sheets of paper and made it so I could understand.


Thanks again Rusty it was a great help :thumbup:

-Matt
 
Nothin to it. If you look at it in the simplest terms. And your welcome

By the way our local library burned down recently and burned up BOTH books and one of them wasn't even coloured in yet!
 
So which one are we following? Are there any addendum to the schematic?

Jeff
 
There is nothing wrong with the schematic. Its just dificult to follow for those that have no electronics/electrical experience
Rusty
 
Rusty McDonald said:
Been haveing this problem alot lately, I will make another Diagram that is a bit easier understand. Give me a copule of days and It will be done.
Rusty
Click to expand...

I didn't say there was anything wrong with the schematic...Nothing. I understand the schematic very well, it's very clear. My question concerning the addendum was based on the above post you made.
 
KB1SYV said:
I didn't say there was anything wrong with the schematic...Nothing. I understand the schematic very well, it's very clear. My question concerning the addendum was based on the above post you made.
Click to expand...

Like I said some peopple dont speak spanish, and some dont read schematics.
 
You must log in or register to reply here.
Back
Top