Fiddleback Friday 1/24/14

[xxwjtxx]

There are usually a few new or very lightly used ones on the flea market.. With a bit of care these knives will probably outlast us so buying one gently
used isn't too bad (and might save you quite a bit)

agreed; i have some going up tonight!

 

[CharlesGrenier]

Man this Auction is Confusing!

 

[Fiddleback]

2014 0123 001 – Runt (Nicest Ever), California Buckeye Burl (dyed and stabilized) over nautral canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265

please

You got it Will. And you also got that badass Scorpion.

I'll take:

2014 0123 013 – KE Bushie, Spectacular, Stabilized Box Elder Burl over nat canvas with a lime green g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275

You got the KE Bushie. Thank You!

ill take the iron wood hiking buddy (2014 0123 005 – Hiking Buddy, Arizona Desert Ironwood over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $230) -- matches my woodsman!

Thanks

Cool. I'm glad you got a set! This one is nice! Thank you!

Ahh - already taken -

Then the 2014 0123 006 – Hiking Buddy, Cofeebag Burlap over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $230


I would like to have the2014 0123 005 – Hiking Buddy, Arizona Desert Ironwood over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $230

Thanks
Tim

Tim, your edit was at 2:34, but at 2:29, farther down the page EW505 called the knife. Unfortunately, its his this time.

I'll take the Runt

and 2014 0123 017 – Bushfinger, Stabilized Curly Maple over natural canvas with white g10 whitewalls, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275

The Runt was already called DC Aggie. I have you down for The Bushfinger (017), and the EDCII (004). Thank You!

I will take the maroon Bushfinger.

Thanks Andy & the rest of the Fiddleback Forge crew!

Very cool knife Ess. Thanks.

Please may I have the 2014 0123 016 – Bushfinger (Model Standard), Cofeebag Burlap from the squad at Shadetree over nat canvas with a lime green g10 pinstripe, Tapered Tang!, Convex on 5/32” thick 3D Spalted 01 steel - $295

Yes you may Cbiner. Thank You!

I would love this one...

2014 0124 023 – The Duke, Emerald Burlap from Shadetree over black canvas with a white g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $330

You got the Duke Brookster. Thank You! Sheaths are sold seperately by either Rick Lowe at ruger315 at charter dot net or Heber Ellsworth at wildmanh at yahoo.com

I'll take 2014 0124 023 – The Duke, Emerald Burlap from Shadetree over black canvas with a white g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $330

Sorry Pandacub, but Brookster got it.

Ugh, missed all the Bushfingers!

I knew this weeks would be hard to pass up.

I'll take the 2014 0123 006 – Hiking Buddy, Cofeebag Burlap over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $230

You got the knife by posting an I'll take it at 2:29. Thank You!

Will take
2014-0124-017

DC Aggie got that one Choilla. Sorry about that. You got the Big Sneaky though (022), and I thank you for the support!

If still avail 2014 0123 012 – Bushcrafter, Just Sweet!, Tuxedo g10, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $315

You got this Bushcrafter Pandacub. Thanks!

Andy, I will take:

2014 0123 021 – Camp Nessie (Model Standard), Orange burlap from Shadetree Phenolics over black g10 with a white g10 pinstripe, Thick handle, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $320

You go the Camp Nessie Thurin. Thank you bro.

You know what, who really needs kids....

I'll also nab 2014 0123 004 – EDCII, Stabilized and Dyed (brown) Maple burl over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick Fiddltextured 01 steel - $290
To pretty to just let sit there

As stated above, you got the Bushfinger and this EDCII, but not the runt. Thank You!

Will take
2014-0123--022

You got the Big Sneaky Choilla. Thank You!

Andy:

I'll gladly take the 2014 0123 008 – Kephart, Nat on nat can, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $285

Thanks Man !

Man, that knife had me this week. Nice score. Thank You.

I would like:

2014 0123 002 – Bushboot (Model Standard), Stabilized curly Koa over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $290

That knife is very nice! Light and pretty. Thank You!

2014 0123 003 – Bushraptor, Stabilized and Dyed (brown) curly Maple over natural canvas with a blue g10 pisntripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $290

I'll take it please

.:.hmm 1 post too late

You got the Bushraptor Bear. Thank You!

The Bushfinger With Dark Handle, do these have Leather Sheathes with them? I am new to this, Sorry Andy-Charlie Grenier

They do not come with sheaths. The sheathmaker are listed in the original post though. Thanks!!!

Could I Please Purchase The Duke with the Emerald Burlap and Beutiful Grind 330 $?? Charles Grenier Thank You Andy

That one is taken Charlie. Sorry.

Andy Is the Bushee 2014 0123011 still available?? Beutiful Knife 275$ if so Id take that

Thats the Sneaky Pete. Its yours Charlie. Congratulations! Thank you!

 

[cbiner]

" i have some going up tonight!"
What are they, if I may?

 

[Fiddleback]

Will take Bushcrafter.
2014-0123-012

That one was taken by Pandacub. Sorry on that one. You got the Big Sneaky. Thank You.

Man it Hard to Get a Knife on here!!

Its gotten a lot quicker lately. The original # you posted ended in 011, so I reserved the Sneaky Pete with the curly Maple. Is this the correct knife or are you looking for the burl handled KE Bushie that was taken by M4super90 and is no longer available?

 

[cbiner]

Awesome! Thanks very much, Andy. It's my first Fiddleback; looking forward to it. PayPal inbound.

 

[CharlesGrenier]

I am Sorry Andy Roy I am Soooo Confused , my First time on this Forum. I was Talking about the Burl Handled Bushy. The Sneaky Pete is Nice But I would Probaly rather a Bushy or Bushfinger

 

[Fiddleback]

I am Sorry Andy Roy I am Soooo Confused , my First time on this Forum. I was Talking about the Burl Handled Bushy. The Sneaky Pete is Nice But I would Probaly rather a Bushy or Bushfinger

That KE Bushie is taken though. I marked the Sneaky Pete as still available. No biggie. You'll get one. I make 1500 a year.

 

[xxkcxx]

Boom!

 

[Mistwalker]

Man this Auction is Confusing!

You're new to the forum, and new to Fridays. It can be a bit overwhelming the first time or two. I usually suggest not even trying to buy the first time, though it is hard to resist. I think familiarizing with the models and handle finishes the first time in, or the week before or something as well, and checking out how the regulars post their choices in previous Friday posts. Then once you know the models and finishes you're really interested in, scroll through on a Friday post looking for those specific models and handle configurations to claim. Then go back afterward and check out the other models. It can be less frustrating that way.

 

[CharlesGrenier]

Andy Roy, I will be Better Prepared Next Time, Sincerely, Charles Grenier

 

[CharlesGrenier]

Thanks Mistwalker, Good Advice!! Charlie Grenier

 

[CharlesGrenier]

Thank You Andy!

 

[Fiddleback]

Thank YOU Charlie. I have thoroughly enjoyed the talk this morning and the posts today. I want everyone to know that the enthusiasm of the knife community and their interest in our knives is a GREAT thing to us. We'll get you a knife Charlie. I really appreciate your interest!

 

[xxwjtxx]

You're new to the forum, and new to Fridays. It can be a bit overwhelming the first time or two. I usually suggest not even trying to buy the first time, though it is hard to resist. I think familiarizing with the models and handle finishes the first time in, or the week before or something as well, and checking out how the regulars post their choices in previous Friday posts. Then once you know the models and finishes you're really interested in, scroll through on a Friday post looking for those specific models and handle configurations to claim. Then go back afterward and check out the other models. It can be less frustrating that way.

+1 great advice; could even be made into a sticky..

 

[CharlesGrenier]

I just Have to Say one more thing that "When I was Looking at your Knives" this Morning and on the Forum today, IT IS LIKE LOOKING At "KNIFE PORN" For me and I am sure others. I love Knives , I will Get one!

 

[xxwjtxx]

I just Have to Say one more thing that "When I was Looking at your Knives" this Morning and on the Forum today, IT IS LIKE LOOKING At "KNIFE PORN" For me and I am sure others. I love Knives , I will Get one!

I use the exact term when talking about Andy's knives; the paradigm shift is getting over initial guilt when taking them outside and using them for their intended purposes... but this passes, a nice patina forms, and life goes on.

Cheers

 

[CharlesGrenier]

Is "SFT" mean = Shaped Full Tang?? In the Handle/Tang Description.

 

[bear71]

Looking forward to Bushraptor, thought someone beat me to it!

 

[Kirkwood]

I just Have to Say one more thing that "When I was Looking at your Knives" this Morning and on the Forum today, IT IS LIKE LOOKING At "KNIFE PORN" For me and I am sure others. I love Knives , I will Get one!

There is a Bushfinger available at BladeCo (http://www.bladecousa.com/fiddleback-forge-andy-roy.html). May not be what you're after, but just a heads up.

There is also a Bushfinger available at another of Andy's dealers, but this other dealer is not a paid BladeForums dealer so I can't mention their name here. Send me an email if you want the info. You'll see the email link if you click on my profile name.