Initialconditions
Gold Member
- Joined
- Jan 6, 2021
- Messages
- 1,252
I accept Zelle or Paypal FnF
BEWARE OF SCAMMERS: I WILL NOT EMAIL OR TEXT YOU REQUESTING PAYMENT. I WILL ONLY BE REPLYING TO PM'S YOU HAVE SENT ME.
PM with offers or questions.
Prompt payment is expected and appreciated after claiming (unless agreed upon BEFOREHAND).
My feedback rating is 100% positive on over 200 transactions here on BF.
I'm also 100% positive on over 500 eBay transactions (same username)
Lastly, I've done hundreds more directly via DM's (repeat buyers), or via IG
*This is my hobby, for enjoyment purposes. As such, I reserve the right to decline selling/trading with whomever. (IE no feedback, negative feedback, scalpers, or general tomfoolery).*
Trade Interests:
MBK RIVER Otter V2
Verification Pic for Pinstripe Arius
Verification Pic for Milled Arius
***All available until marked sold***
SPECIAL BUNDLE PRICE FOR THE PAIR $1300 FIRM
Mini Arius: Polished Pinstripe, M390 Blade -$720 $695
PICS
I hand-polished the face of the scales, bringing out the factory machining marks, resulting in a gorgeous polished pinstripe look. Flat of the clip has been polished to match, but I left the stepped portion of the clip blasted for a nice contrast.
As an homage to CRK's polshed handles, I left the lock-bar in the factory blasted finish.
Factory edge has also been stropped with 6-micron diamond paste resulting in a nicely reflective edge that retains the factory grind lines, but adds a nice level of reflectivity (near-mirror) and makes it wonderfully sharp.
Has been pocketted a handfull of times, so there's a light snail on the show-side and a small snail on the very tip of the lockbar, near the screw, as shown in the photos and videos. Opened a few packages before being stropped, but I notice no obvious marks on the blade.
Cleaned and is running on ultralight nano oil. No loctite used during re-assembly. Good centering, I notice no play. Lock engagement shown in pics.
Compared to my other mini arius, this has a slightly lighter detent making it easier to both slow-roll, and spydie-flick. That said, I suck at middle-finger flicking and since that seems to be the best way to open this blade, I'm moving it along. Knife only; no box or docs.
As shown in the photo, it's a Gen 1, Batch 6
***I am not familiar with Koenig's warranty service, having never used it, but pleased be advised, although the polish is a very light "mod" the warranty is potentially voided***
Mini Arius: Patterned Titanium, M390 Blade -$755 $725
PICS
Comes in original box, as shown. No cut, light carry.
Cleaned and running on ultralight nano oil; no loctite used during reassembly.
Flat of the pocket clip has been lightly polished to help resist snail trails from future carry.
There appears to be a mico-scratch on the blade as shown in the last photo which has been magnified to help see it.
Generation 1, Batch 7
BEWARE OF SCAMMERS: I WILL NOT EMAIL OR TEXT YOU REQUESTING PAYMENT. I WILL ONLY BE REPLYING TO PM'S YOU HAVE SENT ME.
PM with offers or questions.
Prompt payment is expected and appreciated after claiming (unless agreed upon BEFOREHAND).
My feedback rating is 100% positive on over 200 transactions here on BF.
I'm also 100% positive on over 500 eBay transactions (same username)
Lastly, I've done hundreds more directly via DM's (repeat buyers), or via IG
*This is my hobby, for enjoyment purposes. As such, I reserve the right to decline selling/trading with whomever. (IE no feedback, negative feedback, scalpers, or general tomfoolery).*
Trade Interests:
MBK RIVER Otter V2
Verification Pic for Pinstripe Arius
Verification Pic for Milled Arius
***All available until marked sold***
SPECIAL BUNDLE PRICE FOR THE PAIR $1300 FIRM
Mini Arius: Polished Pinstripe, M390 Blade -
PICS
I hand-polished the face of the scales, bringing out the factory machining marks, resulting in a gorgeous polished pinstripe look. Flat of the clip has been polished to match, but I left the stepped portion of the clip blasted for a nice contrast.
As an homage to CRK's polshed handles, I left the lock-bar in the factory blasted finish.
Factory edge has also been stropped with 6-micron diamond paste resulting in a nicely reflective edge that retains the factory grind lines, but adds a nice level of reflectivity (near-mirror) and makes it wonderfully sharp.
Has been pocketted a handfull of times, so there's a light snail on the show-side and a small snail on the very tip of the lockbar, near the screw, as shown in the photos and videos. Opened a few packages before being stropped, but I notice no obvious marks on the blade.
Cleaned and is running on ultralight nano oil. No loctite used during re-assembly. Good centering, I notice no play. Lock engagement shown in pics.
Compared to my other mini arius, this has a slightly lighter detent making it easier to both slow-roll, and spydie-flick. That said, I suck at middle-finger flicking and since that seems to be the best way to open this blade, I'm moving it along. Knife only; no box or docs.
As shown in the photo, it's a Gen 1, Batch 6
***I am not familiar with Koenig's warranty service, having never used it, but pleased be advised, although the polish is a very light "mod" the warranty is potentially voided***
Mini Arius: Patterned Titanium, M390 Blade -
PICS
Comes in original box, as shown. No cut, light carry.
Cleaned and running on ultralight nano oil; no loctite used during reassembly.
Flat of the pocket clip has been lightly polished to help resist snail trails from future carry.
There appears to be a mico-scratch on the blade as shown in the last photo which has been magnified to help see it.
Generation 1, Batch 7
Last edited: