Gravelle Knives "Archer"
7.5" OAL 3" long 1/4" 1095.
Orange G10 Handle,
Good kydex sheath with excellent retention no tek-loc
(Sharpened and lightly used)
Asking $old!
Justin King "Tasker"
7-3/4" overall, .155" thick cpm3v
3-1/2" blade, 1-3/16" wide, high flat grind
Assembled with flared stainless tubing and West Systems G-Flex Epoxy
Finish is hand rubbed to 400 grit and blasted with a mix of fine abrasive and glass bead.
Knife weighs 4.4 oz., 6.8 oz carry weight with pre-tensioned clip installed.
Slightly used. But a great tough blade. 3v just isn't ideal for my situation (salt water environment)
SOLD
CJBull "Black Paper Micarta EDC"
OAL: 7 15/16”
Blade: 3 5/8” Flat Grind; 1/8" thick
Blade Steel: O1 Tool Steel
Handle:Black Paper Micarta-SOLD
Pins: 1/8” & thong tubing in 416 Stainless
Sheath: : 8-9 oz premium leather sheath, Handcrafted for right hand carry
I have sharpened it, but it is otherwise unused. (original edge wasn't so great)
Asking $100-->$80
Daniel Fairly "Bushcraft Knife"
O1 Steel - Blue/Black G10 - stainless tubes
Chisel Ground
about 9" long, roughly 4.5" blade and 4.5" handle
3/16" thick
Sole Authorship
Some scratching from a sharpening. Otherwise unused.
$old
All prices include shipping to Canada and paypal fees (paypal or EMT only please).
Please understand that I am currently in exam period, and my time is limited. I can guarantee getting to the PO within 5 days upon receipt of payment.
All pictures are mine save the Buscrafter, it is Daniel's picture.
I will proffer more pictures upon request.
(That is oil on the Archer)
7.5" OAL 3" long 1/4" 1095.
Orange G10 Handle,
Good kydex sheath with excellent retention no tek-loc
(Sharpened and lightly used)
Asking $old!
Justin King "Tasker"
7-3/4" overall, .155" thick cpm3v
3-1/2" blade, 1-3/16" wide, high flat grind
Assembled with flared stainless tubing and West Systems G-Flex Epoxy
Finish is hand rubbed to 400 grit and blasted with a mix of fine abrasive and glass bead.
Knife weighs 4.4 oz., 6.8 oz carry weight with pre-tensioned clip installed.
Slightly used. But a great tough blade. 3v just isn't ideal for my situation (salt water environment)
SOLD
CJBull "Black Paper Micarta EDC"
OAL: 7 15/16”
Blade: 3 5/8” Flat Grind; 1/8" thick
Blade Steel: O1 Tool Steel
Handle:Black Paper Micarta-SOLD
Pins: 1/8” & thong tubing in 416 Stainless
Sheath: : 8-9 oz premium leather sheath, Handcrafted for right hand carry
I have sharpened it, but it is otherwise unused. (original edge wasn't so great)
Asking $100-->$80
Daniel Fairly "Bushcraft Knife"
O1 Steel - Blue/Black G10 - stainless tubes
Chisel Ground
about 9" long, roughly 4.5" blade and 4.5" handle
3/16" thick
Sole Authorship
Some scratching from a sharpening. Otherwise unused.
$old
All prices include shipping to Canada and paypal fees (paypal or EMT only please).
Please understand that I am currently in exam period, and my time is limited. I can guarantee getting to the PO within 5 days upon receipt of payment.
All pictures are mine save the Buscrafter, it is Daniel's picture.
I will proffer more pictures upon request.
(That is oil on the Archer)
Last edited: