Trip Miller
Gold Member
- Joined
- Aug 9, 2014
- Messages
- 1,125
Something for everyone, pre-Blade extravaganza.
I have more photos and/or am happy to shoot video of any knives. Just PM. If you have specific condition/action questions please PM. Will discuss reasonable offers over PM. All prices are shipped and insured.
I accept PP FF, Zelle or Venmo Only and can provide vouches if needed.
Jerry Hossom Tanto
13.5" OAL, 7" Blade w/ zipper pouch.
Jerry is a legend. 1075/15N20 Alabama Damascus
Hafted in Red Elm Burl. Knife is in new condition from maker.
$900--->$795
Wisor Forge San Mai Hunter
7.5" OAL, 3.25" Blade w/ Shark Leather Sheath
Josh Wisor is a Journeyman Smith and also a Forged In Fire winner. Great guy. Great knife.
80CRV2/410 San Mai with Blackened Bronze fttings, and hafted in stag. Knife is in new condition from maker.
$395--->$350
Stefano Compostella Brenta DLC Lock Back
7 7/8" OAL, 3 3/8" Blade
Stefano is a fantastic multi generation Italian maker. I purchased this from him directly.
Steel is APZ10 Nitrogen and the DLC coated handle is Damasteel Munin. The work is extremely good and action is sublime. Knife is in new condition from maker. Near the pivot on either side there is a little bit of DLC that came off but it is super minor and if you wanted he would correct it I know but probably not worth it.
$1295--->$1195
Dustin Snyder Stratess
7.5" OAL, 3.25" Blade
Dustin crushed it when he made this one. Frame is unreal Hyperdrive Black Timascus. Knife features Zirconium backspacer, pivot inlay and thumb disk. Excellent action on bearings. Knife has had very light carry. Small mark on Hyperdrive Timascus clip. Handrubbed blade has some very small marks that would easily clean up. Hard to see without shining a light on it. Unsure of steel type on this one.
$1195--->$1095
Ranger Made Knives Freelancer
6 7/8" OAL, 3" Blade
Bob Ohlemann is Ranger Made Knives. This piece has the older Texas based stamp on the Damasteel Dense Twist Blade. Covers are incredible Hawaian Koa wood. Bolsters, backspacer, clip and thumbstud are Zirconium. Thumbstud has a very small Koa inlay on it. Linerlock with bronze textured titanium liners. Knife has had extremely light carry. Small stuff on clip that would polish out and a small mark on Lock side end of bolster hard to see. Excellent knife at a great price.
$895--->$795
*SOLD* Rockstead Higo II DLC
8.5" OAL, 3.5" Blade
Per usual Rockstead fit and finish is at the top. This one is no exception. Has been carried but not used. The steel is the exceptional YXR7 and is in the DLC Finish. Nothing else to note on this one.
Will have to check for box and paperwork on this one. I think I have it but did not see it.
*SOLD* $795--->$695
*SOLD* David Breniere Mini Inglorious Slip Joint
6.25" OAL, 3.75" Closed
Blade is RWL34 stainless, covers are a "brut de forge" hand hammered wrought iron.
Knife has had light carry and use but the construction does not show any carry and the as ground blade finish is basically the same. Hard to tell. Very good condition. Comes w/ COA.
*Sold* $595--->$495
I have more photos and/or am happy to shoot video of any knives. Just PM. If you have specific condition/action questions please PM. Will discuss reasonable offers over PM. All prices are shipped and insured.
I accept PP FF, Zelle or Venmo Only and can provide vouches if needed.
Jerry Hossom Tanto
13.5" OAL, 7" Blade w/ zipper pouch.
Jerry is a legend. 1075/15N20 Alabama Damascus
Hafted in Red Elm Burl. Knife is in new condition from maker.
$900--->$795
Wisor Forge San Mai Hunter
7.5" OAL, 3.25" Blade w/ Shark Leather Sheath
Josh Wisor is a Journeyman Smith and also a Forged In Fire winner. Great guy. Great knife.
80CRV2/410 San Mai with Blackened Bronze fttings, and hafted in stag. Knife is in new condition from maker.
$395--->$350
Stefano Compostella Brenta DLC Lock Back
7 7/8" OAL, 3 3/8" Blade
Stefano is a fantastic multi generation Italian maker. I purchased this from him directly.
Steel is APZ10 Nitrogen and the DLC coated handle is Damasteel Munin. The work is extremely good and action is sublime. Knife is in new condition from maker. Near the pivot on either side there is a little bit of DLC that came off but it is super minor and if you wanted he would correct it I know but probably not worth it.
$1295--->$1195
Dustin Snyder Stratess
7.5" OAL, 3.25" Blade
Dustin crushed it when he made this one. Frame is unreal Hyperdrive Black Timascus. Knife features Zirconium backspacer, pivot inlay and thumb disk. Excellent action on bearings. Knife has had very light carry. Small mark on Hyperdrive Timascus clip. Handrubbed blade has some very small marks that would easily clean up. Hard to see without shining a light on it. Unsure of steel type on this one.
$1195--->$1095
Ranger Made Knives Freelancer
6 7/8" OAL, 3" Blade
Bob Ohlemann is Ranger Made Knives. This piece has the older Texas based stamp on the Damasteel Dense Twist Blade. Covers are incredible Hawaian Koa wood. Bolsters, backspacer, clip and thumbstud are Zirconium. Thumbstud has a very small Koa inlay on it. Linerlock with bronze textured titanium liners. Knife has had extremely light carry. Small stuff on clip that would polish out and a small mark on Lock side end of bolster hard to see. Excellent knife at a great price.
$895--->$795
*SOLD* Rockstead Higo II DLC
8.5" OAL, 3.5" Blade
Per usual Rockstead fit and finish is at the top. This one is no exception. Has been carried but not used. The steel is the exceptional YXR7 and is in the DLC Finish. Nothing else to note on this one.
Will have to check for box and paperwork on this one. I think I have it but did not see it.
*SOLD* $795--->$695
*SOLD* David Breniere Mini Inglorious Slip Joint
6.25" OAL, 3.75" Closed
Blade is RWL34 stainless, covers are a "brut de forge" hand hammered wrought iron.
Knife has had light carry and use but the construction does not show any carry and the as ground blade finish is basically the same. Hard to tell. Very good condition. Comes w/ COA.
*Sold* $595--->$495
Attachments
Last edited:
