Im not going to be that guy that says i will only trade for NIB knives, I use my stuff, i dont think twice about it. So if you have a USER knife or a NEW knife, as long as its within reason, I dont care.
if you have something that you think i may be interested in, let me know. worst thing that could happen is i say no.
Im open to offers on the TAD, not entirely sure what I want other than a user Insingo CRK, 25, umnumzaan, higher end microtech auto.
I picked the HTM up cheap, possibly looking for a boker albatros, epicenter, kwaiken (flipper or not), urban trapper (new larger flipper tab only) or CRKT Otanashi/shizuka Noh Ken
Please no multiples, fixed blades or serrations
Im bad about clearing my PM inbox, so please email me any offers at
copperandstars42 at gmail dot com
TAD Dauntless MK4 OD Green USER trade pending
This dauntless has been stone washed to rid the lock side of snail trails (collected them worse than a fresh sebenza). Previous owner got a little sloppy in sharpening and marred up the finish right behind the cutting edge on the choil, centering is slightly to the side favoring the presentation side a little. Other than those two slight issues the knife is fantastic, amazingly smooth action, good lock up with no play.
HTM DDR "Prototype" M390 gun hammer
this was taken in on a trade, love the knife just a little thick for back pocket carry. Was told it was a prototype for the M390 gun hammers, honestly i never fact checked it with HTM or DDR, but the box is signed by DDR and a couple others (assuming the HTM crew). knife is un assisted but comes with the factory spring. This knife doesnt need it, detent is strong and absolutely rockets out every time no matter how you deploy it. It is a user for sure with some dings in the anodizing on the aluminum scales and has a sharpening job that was a little sloppy by a previous owner, i touched it up a little on the worksharp to make it look a little better, BUT, even though its thick behind the edge it slices like a MOFO.
Knife had a sticky lockbar when I recieved it, stickyness still pops up here and there, but it is currently not showing any stickyness.
if you have something that you think i may be interested in, let me know. worst thing that could happen is i say no.
Im open to offers on the TAD, not entirely sure what I want other than a user Insingo CRK, 25, umnumzaan, higher end microtech auto.
I picked the HTM up cheap, possibly looking for a boker albatros, epicenter, kwaiken (flipper or not), urban trapper (new larger flipper tab only) or CRKT Otanashi/shizuka Noh Ken
Please no multiples, fixed blades or serrations
Im bad about clearing my PM inbox, so please email me any offers at
copperandstars42 at gmail dot com
TAD Dauntless MK4 OD Green USER trade pending
This dauntless has been stone washed to rid the lock side of snail trails (collected them worse than a fresh sebenza). Previous owner got a little sloppy in sharpening and marred up the finish right behind the cutting edge on the choil, centering is slightly to the side favoring the presentation side a little. Other than those two slight issues the knife is fantastic, amazingly smooth action, good lock up with no play.
HTM DDR "Prototype" M390 gun hammer
this was taken in on a trade, love the knife just a little thick for back pocket carry. Was told it was a prototype for the M390 gun hammers, honestly i never fact checked it with HTM or DDR, but the box is signed by DDR and a couple others (assuming the HTM crew). knife is un assisted but comes with the factory spring. This knife doesnt need it, detent is strong and absolutely rockets out every time no matter how you deploy it. It is a user for sure with some dings in the anodizing on the aluminum scales and has a sharpening job that was a little sloppy by a previous owner, i touched it up a little on the worksharp to make it look a little better, BUT, even though its thick behind the edge it slices like a MOFO.
Knife had a sticky lockbar when I recieved it, stickyness still pops up here and there, but it is currently not showing any stickyness.
Last edited:
