Initial review: Goncz Hi-tech Flashlight

Status
Not open for further replies.
Would it be possible for any of the more technically experienced members to explain the following and if any part is actually important?

"This evaluation is based upon that the guy can not differentiate the Spring Steel from Aluminum Alloy."

and

"The plastic lining serves to minimize the weight. Because the plastic and the Aluminum Alloy are expanding differently at the raised temperature and to maintain it in position, there is a Spring Steel Sheet is serving as a liner and to maintain it in the housing at the event when the batteries are changed to prevent the tubing to fall out."

Regards,

Stuart
 
I think you're working too hard, you're not supposed to think about what he writes, but just go with the flow.

What I think is interesting of late is that after all that talk about engineering and the best, blah blah from Goncz. Essentially hobbiests find and use bulbs better than the ones he provided.

Personally, I'm looking forward to the next gay commie crap throwing monkey insults. :p
 
Dave:

Ahh Haa! I thank you sir for the straight advice. I will unlock the logic lever regarding Mr. Goncz statements from this time onward.

Very best regards,

Stuart
 
I will try again to explain maybe better for some of you guys, that maybe was not clear:

The plastic lining is intended to reduce the weight, as the aluminum is heavier, than plastics therefore the aluminum is removed inside and replaced with the lighter material plastic. When the light is on longer time the bulb generates heat, thereby the plastics lining gets warm too and looses is stifnees. As the material cools off the plastic as it was exposed to temperature will get smaller and the press-fit would be not the same press-fit as it will be smaller. The Spring steel lining serving as a semi-permanent holder in place and maintains the pressure on the plastics.

We could made the unit cheaper by leaving the material in as others do but "we are making the best solutions come true".

As to the comies I never will have any smpathy for those "Bastards".

As to gays they can live the way they want... I never expressed any opinion about them as they are some talented ones that I know.

Other topics: watch for the new website comming. It will feature some new products.

If is till not clear let me know and I will try it again or one of my engineer will do it with a different accent.

Cordially,

:) ;) :o
 
The 'VORGARTENZWERG' stated the the aluminum sheet between the plastic and the housing... The reference was made to that statement.
:o
 
Mr. Goncz:

I understand that you may have had an indepenent lab test your light devices and that you were possibly going to reveal the lab results or disclose the identity of the lab? Would it be possible to release that information now?

Regards,

Stuart
 
Oh yeah, as if my comment on my cut fingers based on that "spring steel" which I named aluminum would make any difference anyway :D

What is revealing at least to me is that we still have no answers on

Lab test ?
Which lab test ?
Carley #912 socket speced for max 1A current but used for 2.5A ?
Bulb underdriven causing the yellowish beam ?
Bulb choice based on theoretical cells without voltage drop ?
Lumen output calculated with voltage by bench supply ?
Melted plastic lense still not replaced with the payed for Borofloat ?
Still no-show for the paid for replacement bulb ?
Still no working charger for the rechargeable model ?

"Soap on"

Klaus
 
I hope that this is not too off subject for this thread but have any of the members (Klaus, David, or any other more technically advanced member) or can mr. goncz compare a high output light called the Dorcy Spyder (purchased from a Costco for approx. $27.00 for a package of two lights including 123 batteries) to the goncz flashlight or other similar lights? The tac lights that I am currently testing appear to be very close (but not quite the level of quality) to my older Surefire lights and as mentioned above are considerably less expensive.

If the moderators consider this to be off subject, my apologies and please move or delete as necessary.

Very best regards,

Stuart
 
Mr. Goncz:

Would you please answer the questions above? That is mine or any of the others?

Very best regards,

Stuart
 
Mr goncz:

It is now clear that you do not wish to discuss your equipment or compare it to other equipment. No need to become rude and unrefined about a direct question. Do you have a retail store and/or what are some retail companies in California and Nevada that carry your flashlight products? A list of names and/or city locations would be helpful in that none appear to be listed on your web site.

Regards,

Mr. Gatz
 
getz,

look for other lights than ours, as your brain capacity will not appriciate what you would see,,,,,

So now for your magic trick, disapear for god off my back.

Adios
 
Mr Goncz, you obviously don't come here to discuss your products and to help inform us of why they are better than the competition. It seems that all you want to do is insult peoples intelligence that are obviously at least as smart as you are. Please answer the questions you are being asked or quit wasting our time with the useless drivel that you are spouting. Thank you.
 
Mr goncz, or should I say Lajos "little monkey man":

It is "Mr. Gatz, Sir" to you. Get the spelling correct monkey man. Since you have not the courtesy to behave yourself in a civilized manner, you will be addressed according to the apparent low station in life that you have created for yourself and based upon the complete lack of good form and low brow behaviour that you believe that you are entitled to. You will be treated accordingly.

The garbage that you attempt to pedal should remain where it belongs, in the garbage can next to your "factory" and next to the "Edsel" type equipment that you have tried to sell for years. In other words your garage, your friends garage, or your parents garage because thats where you lay your little head at night.

This will be realistic therapy for you. Say it over and over again as you gaze into the mirror like some crazed egomaniac every few minutes, "I cannot sell this trash, I cannot sell this trash..." This will ultimately make you feel better, create a more benificial environment, and hopefully avoid your inadvertently selling faulty equipment to some professional who might become injured or worse because he used such inferior "tools".

Now let's take a closer look at your equipment and here is another reality check for you. In spite of your braggadocio, we have not located any, that is ANY Law enforcement agency or military unit that has even heard of you or your equipment (flashlights) or tested it. This includes an earlier alegeation by you that the CDC (thats California Department of Corrections) allegedly tested "inescapeable" handcuffs that you alleged to have designed/manufactured. Reality check lajos: in spite of your hoopla, you would never have been permitted access to the interior of a CDC facility to test some retention device on inmates.

Now as far as your "marvel of firearm ingenuity", the goncz pistol or whatever... You appear to have made a pretty pathetic attempt at copying and tweeking the tec 9. No wonder it was such a "hot seller" for you. It does appear to be yet another credit to your brain capacity and marketing ability (I mean obvious inability).

You have quite the long history of attempting to inflate your ego with self professed extraordinary abilities or technical marvels that simply put (for someone with limited brain capacity), end in the appropriate receptacle. I would recommend that instead of wasting your time (and more importantly others time) by attempting to peddle inferior merchandise that you work at something much more your caliber such as perhaps a mechanic at the quick lube across the street (you know what I mean). You will most likely have more success at talking little old ladies into needless repairs than talking professionals into buying totally inferior and overpriced equipment. No offense meant for any real quick lube mechanics.

As for the Chinese (actually Taiwan but you probably have as much difficulty with a map as you do with language) flashlight. So far it appears much better that anything you have sent to some of the other members. Should we expect to see you attempting to sell a copy of this one in the near future too? I do not believe that you would be able to make them fast enough in your little garage "factory".

The only American fed by your junk appears to be your fragile ego. Yes lajos, the food, much like your brain power, is definately asleep.

Now lets take a closer look at your professed "hanging people by their foot" in 1956. If any of this is true then you were most likely one of the communist's who were stringing up true Patriots for simply protesting. News flash monkey man, the only people doing that kind of thing in the Chech Republic at that time, were the cowardly communists (most likely secret police). By the way, did you drive a tank over anyone?

Now on to your company and this is the best and most important part. There is no evidence of any business license, commercial property, manufacturer's license, or any other clear evidence of a legitimate business regarding "goncz hi tech" or goncz anything. The California State Board of Equalization and the City of Los Angeles Business Tax Department will be VERY interested in ANY income that you have earned from this...melodrama that you call a business. I advise of this primarily because with the lack of evidence of any business licensing, it is most likely that goncz does not have any liability insurance to cover losses related to any possible malfunction of his product and this has already been mentioned by other persons more capable of testing the subject lights.

If the moderators believe any of this to be against policy or too harsh (under the circumstances I would find that hard to believe but I am not infallible) then please accept my most sincere apologies and take any requisite action regarding this post.


All the very best regards,

Stuart (or to you lajos, it's Mr. Gatz)


:D ;)
 
I answered this garbage under other title please read it there.

Anything new?

Watch for the new Web Page.

Cordially,
 
Too late to change it. Info already sent to appropriate agencies.

All the very best regards,

Stuart (or to you lajos, it's Mr. Gatz)

:D
 
Mr. Candlpower,

Why should I disclose information, that could be beneficial to the competition?
 
Who could possibly benefit from your crap? I can't think of a light manufacturer who would think of your info as advantageous.
 
Status
Not open for further replies.
Back
Top