Kornalski "Jamall" knives - Bohler PM M390 and Uddeholm PM Vanadis 4 Extra steels

[KornalskiKnives]

Hi,

You can find me on my website --> www.kornalski.com.pl
There are links to Instagram or Facebook if you use them.

Any questions; orders or want to talk mail me --> adam@kornalski.com

To all costs posted in the thread --> you need to add 5% for PayPal fee.
------------------------------------------------------------------------------------------------------------

Knife: Hunter
Steel: CPM 3V PM Stainless Tool Steel
Thickness of 3,6 mm
Hardness: 60 HRC Secondary hardness
Handle: Brown Canvas Micarta sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 275 mm
The width of the blade: 30 mm
Blade 140 mm
Weight 27 g.
Sheath: 2 mm black ABS with Bog TekLok

Asking: 200 $ shipped

------------------------------------------------------------------------------------------------------------

Knife: Hunter
Steel: CPM 3V PM Stainless Tool Steel
Thickness of 3,6 mm
Hardness: 60 HRC Secondary hardness
Handle: Brown Canvas Micarta sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 275 mm
The width of the blade: 30 mm
Blade 140 mm
Weight 27 g.
Sheath: 2 mm black ABS with Bog TekLok

Asking: 200 $ shipped

------------------------------------------------------------------------------------------------------------

Knife: Agor
Steel: Vanadis 4 Extra PM Stainless Tool Steel
Thickness of 4,7 mm
Hardness: 63 HRC Secondary hardness
Handle: G10 Black sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 255 mm
The width of the blade: 33 mm
Blade 125 mm
Weight 219 g.
Sheath: 2 mm black ABS with Bog TekLok

Asking: 200 $ shipped

------------------------------------------------------------------------------------------------------------
Knife: Agor
Steel:M390 Bohler PM Stainless Tool Steel
Thickness of 5,3 mm
Hardness: 61 HRC Secondary hardness
Handle: Green canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 315 mm
The width of the blade: 37 mm
Blade 185 mm
Weight 399 g.
Sheath: 1,5 mm black Kydex

Asking: 250 $ shipped

------------------------------------------------------------------------------------------------------------

Knife: ODC180
Steel:M390 Bohler PM Stainless Tool Steel
Thickness of 5,3 mm
Hardness: 61 HRC Secondary hardness
Handle: G10 Black sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 310 mm
The width of the blade: 38 mm
Blade 180 mm
Weight 402 g.
Sheath: 1,5 mm black Kydex

Asking: 250 $ shipped

------------------------------------------------------------------------------------------------------------

Knife: AgorEDC
Steel: Vanadis 4 Extra Tool Steel
Thickness of 3,62 mm
Hardness: 63 HRC Secondary hardness
Handle: G10 black --> sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 250 mm
The width of the blade: 31 mm
Blade 125 mm
Weight 211 g.
Sheath: 1,5 mm black Kydex

Asking: 175 $ shipped

-------------------------------------------------------------------------------------------

Knife: Agor130
Steel: Vanadis 10 Tool Steel
Thickness of 4,4 mm
Hardness: 62 HRC Secondary hardness
Handle: G10 black sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 255 mm
The width of the blade: 34 mm
Blade 130 mm
Weight 223 g.
Sheath: 2 mm black ABS

Asking: 175 $ shipped

-------------------------------------------------------------------------------------------

Knife: Mikko Long 7"
Steel: Vanadis 4 Extra Tool Steel
Thickness of 4,7 mm
Hardness: 63 HRC Secondary hardness
Handle: G10 black sandblasted
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 317 mm
The width of the blade: 35 mm
Blade 180 mm --> 7 inches
Weight 285 g.
Sheath: 1.5 mm black Kydex
It is knife for cutting - very thin and razor sharp edge.

Asking: 200 $ shipped

-------------------------------------------------------------------------------------------
IMPORTANT NOTE:

Bohler Stainless Steel N690 tool steel is very good steel.
But when hard is not very tough for heavy works especially with the tip.

So:
No rust, holds working edge long, easy to sharpen but not suitable for tanks or windows opening. You can loose the tip.

Perfect for kitchen, cutting, slicing or skinning.

Please consider this when buying.

J.
--------------------------------------------------------------------------------------------------

Knife: Agor
Steel:N690 Bohler Stainless Tool Steel
Thickness of 4,4 mm
Hardness: 58 HRC Secondary hardness
Handle: Brown canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 34 mm
Blade 140 mm
Weight 230 g.
Sheath: 2 mm black ABS with Big Tek-Lok

Asking price: 155 $ shipped

---------------------------------------------------------------------------------------------------

Knife: Agor
Steel:N690 Bohler Stainless Tool Steel
Thickness of 4,4 mm
Hardness: 58 HRC Secondary hardness
Handle: Brown canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 34 mm
Blade 140 mm
Weight 245 g.
Sheath: 2 mm black ABS with Big Tek-Lok

Asking price: 155 $ shipped

---------------------------------------------------------------------------------------------------

Knife: Agor
Steel:N690 Bohler Stainless Tool Steel
Thickness of 4,4 mm
Hardness: 58 HRC Secondary hardness
Handle: Brown canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 255 mm
The width of the blade: 33 mm
Blade 130 mm
Weight 240 g.
Sheath: 2 mm black ABS with Big Tek-Lok

Asking price: 155 $ shipped

---------------------------------------------------------------------------------------------------

Knife: Agor
Steel:N690 Bohler Stainless Tool Steel
Thickness of 4,4 mm
Hardness: 58 HRC Secondary hardness
Handle: Brown canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 258 mm
The width of the blade: 34 mm
Blade 130 mm
Weight 225 g.
Sheath: 2 mm black ABS with Big Tek-Lok

Asking price: SOLD

---------------------------------------------------------------------------------------------------

Knife: Agor
Steel:N690 Bohler Stainless Tool Steel
Thickness of 4,4 mm
Hardness: 58 HRC Secondary hardness
Handle: Brown canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 34 mm
Blade 135 mm
Weight 250 g.
Sheath: 2 mm black ABS with Big Tek-Lok

Asking price: 155 $ shipped

 

[Currawong]

Email inquiry sent about the AgorEDC

 

[FrankG34]

About how thick is the Agor right behind the edge and how many degrees is the edge sharpened at? Thanks Is it okay to chop wood with it?

 

[KornalskiKnives]

About how thick is the Agor right behind the edge and how many degrees is the edge sharpened at? Thanks Is it okay to chop wood with it?

I make standard knives with 0.4-0.5 mm thickness before sharpening.
I put 20 degrees per side if customer does not want different sharpening.

Yes Vanadis4e is hard, holds edge very long, easy to sharpen and very tough.

Please read the steel card:
http://www.uddeholm.com/files/PB_Uddeholm_vanadis_4_extra_english.pdf

A.

 

[JeffLesniak]

I'll take the Agor EDC Vanadis 4E. Sending PM for PP info.

Thanks!

 

[FrankG34]

I make standard knives with 0.4-0.5 mm thickness before sharpening.
I put 20 degrees per side if customer does not want different sharpening.

Yes Vanadis4e is hard, holds edge very long, easy to sharpen and very tough.

Please read the steel card:
http://www.uddeholm.com/files/PB_Uddeholm_vanadis_4_extra_english.pdf

A.

I was asking about the M390 one. Is it okay to chop 3 inch wood with it?

 

[Currawong]

I was asking about the M390 one. Is it okay to chop 3 inch wood with it?

Of course the maker will provide an expert response, but in my opinion M390 at that blade thickness and angle would probably be fine for chopping softwood but risky for batonning through hardwood (by which I mean it would do fine most of the time but eventually you might hit it way too hard just as you hit a knot and you would risk losing a chunk out of the edge or even the spine snapping if the blade flexed massively while being hit). This is just going on what I've seen others say. M390 is a tough stainless, but wouldn't be quite at the level of something like 52100 and nowhere near V4E or CPM-3V. Jamall please correct me if I'm wrong!

 

[KornalskiKnives]

Currawong, you are right.
I use M390 for its corrosion resistance 20% of Cr makes it stainless even hardened for secondary hardness.
But M390 is not good choice for tough knives.
It hold edge perfectly and sharpen easily plus it is stainless.

If looking for the tough knife choose A8Mod(Viking), CPM 3V or Vanadis4e, K600 and some other tough steels.

I love M390 for cutting abilieties and make my knives with M390 for that purpose.
Then trying use tip with my heat treatment process it CAN crack quite easily in comparison to steels mentioned above.

So

M390 for cutting purposes and when no maitenance is desired.
Vanadis4E for tough field knives and cutting also but can rust...

That is my choice for steels.

DO not want to take care of your knife and do not need tough tank opener you will love M390.
For all rest - choose Vanadis4e

J.