Figured I'd see if there was any trade interest out there for this one. Not really looking for anything in particular. As long as its of equal value let me know what you have.
Lionsteel SR-1 with a Chad Nichols Starfire Damascus blade. I replaced the stock teflon washers with phosphor bronze ones and this piece is silky smooth and has tighter lockup than when I got it new. Bank vault with no play or flex in any direction. I carried this on and off but it didn't see much use. I found the stock convex grind to be a horrible cutter so I re-profiled it to 20 per side and its a great performer now. Blade is off center and has been since new with the original washers but doesn't rub. I keep my non flipper pivots pretty tight so it may straighten out if you adjust it. Comes with all original packaging and knife art accessories.
Lionsteel SR-1 with a Chad Nichols Starfire Damascus blade. I replaced the stock teflon washers with phosphor bronze ones and this piece is silky smooth and has tighter lockup than when I got it new. Bank vault with no play or flex in any direction. I carried this on and off but it didn't see much use. I found the stock convex grind to be a horrible cutter so I re-profiled it to 20 per side and its a great performer now. Blade is off center and has been since new with the original washers but doesn't rub. I keep my non flipper pivots pretty tight so it may straighten out if you adjust it. Comes with all original packaging and knife art accessories.
Last edited: