Many Busse and Kin Knives & 1911 Grips

Status
Not open for further replies.
Feedback: +17 / =0 / -0
Joined
Dec 13, 2005
Messages
31
Some Busse and kin knives and 1911 grips for sale.

The prices listed below include USPS Priority Mail shipping, fully insured with signature confirmation. I will only accept Postal Money orders. No PayPal.
I will only sell/ship in the continental United States. I am not interested in trades.

The first unqualified “I’ll take it” in the forum gets the knife.

General Comments about all of the knives:
None of these knives is what a collector would define as mint. I bought all of them to use and treated them as such – even the pretty ones. Some have been used very little; some have been used a ton. None have been abused. None have been sharpened.

I’ve only place one picture per item here. Follow this link to view more of each item. http://www.flickr.com/photos/79880121@N06/sets/

1. Busse NMFBM; tan blade, sterile; black, hand-finished, magnum canvas micarta slabs. I purchased this one directly from Busse Combat. This knife has smacked a few light limbs. No really visible wear on the coating or edge.
Price: $675.00
7005315558_a42919cca2_z.jpg


2. Busse FBM; black, sterile, blade; snakeskin micarta slabs; purchased directly from Busse Combat. This knife was used for a large amount of yard work. I’ve also batoned with it. Price $650.00
7005230452_6c7e76c883_z.jpg


3. Busse FFBM; black blade; snakeskin micarta slabs; purchased at Knob Creek in fall 2007. Very little wear on this one. Some scuffing of the coating from trying to put it in a kydex sheath for an FBM. Price: $675.00 Sold Pending Funds to CPC
7005230852_f481c2d644_z.jpg


4. Busse Basic 11; tan blade; black handle. Purchased directly from Busse. Little use. No visible wear on blade or coating. Price: $375.00 Sold and Shipped to tiburon
7005227360_b3fddb98c1_z.jpg


5. Busse HOGFSH; black blade, snakeskin micarta slabs. I picked this one up at Knob Creek in fall 2007. This one has been used around the yard extensively. Some of the black has scuffed off. The edge is in great shape. Price: $675.00
7005231784_76d92d5bbb_z.jpg


6. Busse Custom Shop Cupidaganzaa HOGFSH; black blade; green and black, hand-shaped, magnum slabs. I haven’t used this for anything. I found the handles to be too big. Price: $580.00 Sold and shipped to zxgeoff
7005261584_d00803c559_z.jpg


7. Busse NMSFNO; tan blade, green, hand-shaped, magnum micarta slabs. I purchased this directly from Busse Combat. This blade has seen some serious use breaking limbs off fallen trees after an ice storm. It survived the ordeal with no damage to the blade and a small amount of coating wear. Price: $400.00 Sold and shipped to notsnhoj
7151380487_cfd614d697_z.jpg


8. Busse EU Mister Mojo; green blade; green canvas micarta slabs; from the Minumental Ganzaa 05 Feb 2006. Used lightly. The coating is chipped and scuffed. Price: $575.00 Sold pending funds to highpointforge
7005274208_9209ae88fd_z.jpg


9. Busse Hellrazor; desert camouflage blade; tan, magnum, canvas micarta slabs. I bought this directly from Busse Combat. This knife has done some limbing and shows wear on the coating and on along the edge. Price: $350.00 Sold and shipped to dericdesmond
7005277654_f5858db883_z.jpg


10. Busse NO-E black, sterile, asymmetric blade; black, canvas, micarta slabs. This one was purchased from a forum member and is in great shape. I’ve tested the blade on paper and cardboard packages. There are some defects in the coating and some slight scuffing as well. Comes with what the original sheath. Price: $450.00 Sold and shipped to notsnhoj
7005232938_aef00d2820_z.jpg
 

Attachments

  • 7005315558_a42919cca2_s.jpg
    7005315558_a42919cca2_s.jpg
    2.1 KB · Views: 1,013
Last edited:
11. Busse Skinny ASH1; black blade, black canvas micarta slabs. Purchased from the Company Store. Comes with a Leatherman’s black, leather sheath. Used routinely. Shows very little wear on the coating or blade. Price: $375.00
7151369273_010c1e8c86_z.jpg


12. Busse Boss Street Custom satin-finished, hollow-ground blade, giraffe bone slabs with mosaic pins; Purchased at Knob Creek – although I don’t recall when. I’ve used this gently. No damage to the edge or blade. Price: $400.00
7151347957_0d93566c07_z.jpg


13. Busse Miliganzaa Leaner Meaner; tan blade, black canvas micarta slabs. Used around the house. The coating is scuffed and the edge has some wear. Price: $180.00 Sold and shipped to jball125
7005273240_b4b2c9c28e_z.jpg


14. Working Man’s Cultellus; satin blade; tiger hide micarta slabs; purchased during Razorganza 19 December 2007; used lightly; surface scratches and a small chip near the very tip of the blade where it was dropped on a tile floor. Price: $185.00 Sold and shipped to Biggerdawg
7005265286_5c3a9c5327_z.jpg


15. Swamprat Ratweiler; black blade, black canvas micarta slabs. Purchased from a forum member. Used – coating is lightly scuffed and chipped off on the tip and around the lanyard hole. Comes with the original sheath. Price: $400.00
7151323607_8629f04722_z.jpg


16. Scrapyard Dogfather; black blade, black handle. Purchased at Knob Creek. I hacked into some drywall with this one. It has some scuffing of the coating. No damage to the blade. Cardboard sheath. Price: $275.00
7151382149_bbb262d575_z.jpg


17. Busse 1911 Grips; snakeskin micarta. I purchased these in the Microscopic Ganzaa (July 06). I’ve modified the right grip with a Dremel tool for a Springfield Armory ambidextrous safety. Mounted but never carried. Price: $200.00 Sold and shipped to vitadura
18. Busse 1911 Grips; green canvas micarta, I purchased these in the Microscopic Ganzaa (July 06). I’ve modified the right grip with a Dremel tool for a Springfield Armory ambidextrous safety. Mounted but never carried. Price: $100.00 Sold and shipped to Flatsman007
19. Busse 1911 Grips; tan canvas micarta, I purchased these in the Microscopic Ganzaa (July 06). I’ve modified the right grip with a Dremel tool for a Springfield Armory ambidextrous safety. Mounted but never carried. Price: $100.00
20. Busse 1911 Grips; tiger hide micarta. These grips are unused, unmodified, never mounted on a pistol. Price: $100.00 Sold and shipped to rega25
7005227044_b6d1ebdda4_z.jpg
 
Last edited:
I will take the snakeskin micarta handles for 1911, if they still fit a colt national match 70 series, thanks, PM send
 
I'll take the FFBM (via "proxy").

PM sent.

Chris.
 
Last edited:
Back ups on the snake skin 1911's if they are gone then I want the black canvas 1911's please. Thanks!
 
I wish you would consider PAYPAL ...I would love to buy that HOFFSH for$580.00.Let me know if you change your mind! Thanks!
 
Status
Not open for further replies.
Back
Top