- Joined
- Apr 3, 2011
- Messages
- 6,023
Used but has a ton of life left. Blade has been shortened to just over 2.5". Reground to 220 grit w/ the edge set to about 18 dps w/ a 25 dps microbevel - absolutely razor sharp w/ a needle tip.
This is the 5/16" thick version with Z-wear PM steel and green g-10 scales. Comes with the sheath, which has been re-fitted to the blade after the regrind so it is nice and snug w/ no play. You can not get these anymore as Miller Bros isn't taking any orders at this time. Open for trades, primarily looking at folders but lmk what you have along w/ specifics on the trade (i.e. I'll give you x with $.. for the karambit) or vise versa.
This is the 5/16" thick version with Z-wear PM steel and green g-10 scales. Comes with the sheath, which has been re-fitted to the blade after the regrind so it is nice and snug w/ no play. You can not get these anymore as Miller Bros isn't taking any orders at this time. Open for trades, primarily looking at folders but lmk what you have along w/ specifics on the trade (i.e. I'll give you x with $.. for the karambit) or vise versa.
