Mini Ti Pry Info Thread

[symphonyincminor]

Steve,

Any plans for another run of the Deluxe Mini's?

 

[STR]

Steve,

Any plans for another run of the Deluxe Mini's?

Yes when I can get time to do some. I have been so pre-occupied with the basic model as well as my low rider clips that these are about all I do. It was all I could do to squeeze in four folding knives I had been needing to get done. Well, three, one of those isn't done just yet. Its getting there though.

STR

 

[kenshomi]

Two like this shipped to Mi. PM me and I'll send fund to your pay pal.

 

[STR]

PM sent. Thanks

STR

 

[robotech]

I am putting to gether two Maxpedition mini pocket organizers. They are only 6".
Is it possible to get two 4" with bent end, one in black with black paracord and one in pink with Khaki paracord?
And if so, how much?
thanx

 

[STR]

I am putting to gether two Maxpedition mini pocket organizers. They are only 6".
Is it possible to get two 4" with bent end, one in black with black paracord and one in pink with Khaki paracord?
And if so, how much?
thanx

Cannot do black colors. I have black cord. Thats the best I can do with it. Brown is the only dark color I can think that would suffice unless one of dark blue or plum colors like royal blue or purple would work. I can get a feminine color close to a pink tone but not pink per say but I can get a light violet mauve like color.

They are $20 each add first class shipping. $23 for one (cont. USA ) $44 for two, $65 for three and after three shipping remains $5. Over seas we usually add a buck to each of the totals and that covers it. Thanks

STR

 

[robotech]

so, $44.00 for two.
The dark blue with black para is fine, and the pinkish color (for my daughter) with a khaki para for the other.
4" and w/one side bent.
Is your paypal still the same one I see in this thread?
You can PM or email me it if you like.
I will pay by PayPal.
I will get back to you on the 31st.
I have two fixed blade commitments here on the forum, for the 31st, so I will pay you when I pay those.
Hobby budget for March is shot, and I had to whine to wifey to even get that, LOL.

 

[STR]

so, $44.00 for two.
The dark blue with black para is fine, and the pinkish color (for my daughter) with a khaki para for the other.
4" and w/one side bent.
Is your paypal still the same one I see in this thread?
You can PM or email me it if you like.
I will pay by PayPal.
I will get back to you on the 31st.
I have two fixed blade commitments here on the forum, for the 31st, so I will pay you when I pay those.
Hobby budget for March is shot, and I had to whine to wifey to even get that, LOL.

Okay then. Just remind me again on the 31st then. Thanks Oh and yes my pay pal is still the same.
STR

 

[MerkurMan]

Hey there! Really admire your work. I'd love a bead blasted prybar with the orange/black camo wrap. I'm assuming from a previous post that shipping to Canada doesn't add to the cost of $23, so I'll fire off the PP right away so I don't forget!

Thanks a bunch!

 

[robotech]

Okay then. Just remind me again on the 31st then. Thanks Oh and yes my pay pal is still the same.
STR

Steve
I will be sending you payment later today by paypal.
Before then a couple of questions.
Can you do the Titanium color to match this

and instead of paracord. I would like the tether cord. Need it to flatten the item for packing.
Khaki on the pinkish, and black on the titanium/dark blue (whichever).
I'll check this thread before I send payment.
thanx

 

[STR]

Steve
I will be sending you payment later today by paypal.
Before then a couple of questions.
Can you do the Titanium color to match this

and instead of paracord. I would like the tether cord. Need it to flatten the item for packing.
Khaki on the pinkish, and black on the titanium/dark blue (whichever).
I'll check this thread before I send payment.
thanx

I don't know what 'this' is since all I see is a red x. I don't know what tether cord is. All I have is what you see here which is mostly nylon and para cord wraps.
STR

 

[robotech]

I don't know what 'this' is since all I see is a red x. I don't know what tether cord is. All I have is what you see here which is mostly nylon and para cord wraps.
STR

That's odd, I can see the pic in my first post and in your response.
anyway
here is the link to the Preon flash in Titanium.

And I mean the thin cord, I guess it's the nylon. That cord is what I call "tether cord" as it is used for small lanyards to tether the item to a stable anchor. I guess not many know it as that.
The paracord is much thicker.

I wil be back to pay around 4:00PM CST, waiting for my wifey to release my hobby money this afternoon. It's a pain, but I had nothing until she took over the budgeting, so I can't complain. I am too impulsive.

 

[STR]

That's odd, I can see the pic in my first post and in your response.
anyway
here is the link to the Preon flash in Titanium.

And I mean the thin cord, I guess it's the nylon. That cord is what I call "tether cord" as it is used for small lanyards to tether the item to a stable anchor. I guess not many know it as that.
The paracord is much thicker.

I wil be back to pay around 4:00PM CST, waiting for my wifey to release my hobby money this afternoon. It's a pain, but I had nothing until she took over the budgeting, so I can't complain. I am too impulsive.

All this is in my first post regarding finish choices. What I offer is bead blasted and hand rubbed with either of those finish choices being anodized a color. What that flashlight has on it appears almost chromed or mirror polished to what is a reflective finish. I have no way of doing that sorry.

I'll be happy to make you one within the scope of what I offer though.
STR

 

[robotech]

paypal sent for 2 4" bead blasted, bent on one end. one "pinkish" with thin Khaki nylon cord and one dark blue with Black thin nylon cord.
Thank you, Sir, and please let me know when shipped.

 

[STR]

They're shipped!

Thanks
STR

 

[robotech]

They're shipped!

Thanks
STR

Jeezus, bruttha. that was fast!
Thanx!

 

[robotech]

Steve
I recieved the bars today.
Problem
You either sent me the wrong order or something.

I asked for two bars. both bent on one side.
One in the "pinkish" color with Kahaki thin cord wrap.
One in the dark blue color with black thin cord wrap.
The thin cord is pictured in your picture post.
Well, I received one GOLD STRAIGHT bar with a black and orange paracord wrap
and one dark blue one side bent with ORANGE paracord.
Neither of these were what I ordered.
I will send these back to you as I have no use for either if they are not what I ordered.
Please let me know if you will send the correct ones, or should I get a refund.
Thanx
Robert

 

[STR]

Its totally my bad here. I simply shipped you the wrong envelope sure that I grabbed the correct one. Your pry tools are sitting right here but I can get these out to you now that I'm aware of what I did. My apologies.

I don't have a black thin cord. I have what is actually a dark green from those pics. Also, I'm not sure which one you mean by khaki thin cord. I have a couple brown like colors in two of the rolls here but keep in mind these are two or three shade cords my wife gave me. For example the one with a khaki color also has like a green in it which is what I've used on the one so before I ship these out and not wanting to mess up again let me know for sure. The one you wanted black on I simply wrapped with a different black cord because its the only black I have other than the regular para cord stuff shown. This one I have in black is kind of a thickness inbetween the thin cords I have posted here and regular para cord. If that won't work let me know because I want to get it right this time. :thumbup:

STR

 

[robotech]

I kinda thought that is what happened
Yeah, the black cord you mentioned is OK on the dark blue one as it will go in my Maxpedition edc case. The khaki and green cord on the pinkish is good, too. It will go in my daughters case and I want to keep it as thin and light as possible.
I have these boxed and will buy and print a label tomorrow and will ship, Monday.
Things happen, been there, done that, have the tee shirt in multiples.
I have 6 Utility EDC blades wrapped in 5 colors on the bench, now. Waiting for cord tips to come in to finish. Two with bottle openers ground in, and all with Kydex sheaths. I am going to put them on the 'bay, and it's going to be a nightmare keeping them straight when they sell. So, yeah, I know what you mean.
thanx Steve
Robert

 

[STR]

Don't spend postage on them. Keep em. I'll live. Pay it forward if you like.:thumbup: