Skywalker31
Gold Member
- Joined
- Feb 29, 2012
- Messages
- 819
3/27 edit - thread closed, please see new thread here for price drops on remaining: https://www.bladeforums.com/threads/spyderco-military-1-204p-price-drops.2069651/
Thanks!
Hi all,
Been a while since I've done this but need to downsize the collection. Mix of users and LNIB here but most are at least light users, so please read descriptions and look through pics. Pics should be decent resolution - if you're just seeing the lower res imgur album versions consider right-clicking or long-pressing and "Open image in new tab" to get the full resolution version.
Prices are Paypal G&S, shipped USPS small flat rate priority. Prefer to deal with established paid members (can DM), within US. Not interested in trades, strictly downsizing here. Thanks!
Username proof pic:
ZT 0393 - Sold. Used and sharpened, no box.
ZT 0357 - Sold. Used and sharpened, no box. Fires hard and locks up well but centering a bit off and the torsion bar rattles a bit - feel free to open it up and pack a little grease in there if the rattle's a concern for you. Some wear on the paint on the clip, and G10 wear a little uneven on front due to carrying with clip set left-handed. .
ZT 0801BRWCF - $400. Light use/carry and sharpened. Box included. Not at all a hard user. If I added any scratches the wash hides them pretty well - sharpened edge is main thing that looks non-factory to me.
Hinderer Firetac Recurve - $300. Used and sharpened. Black G10, battle bronze. Box, tri-way hardware, extra skiffs, extra thumb disk with more shine (have not tried to install skiffs or extra disk; previous owner included them) included. Some scratches on blade in the right light, stonewash hides them at other angles. Snail trails on lock side, esp in one spot on lock bar and around pivot. See pics.
Benchmade 908BK-1501 - Sold. KSF Axis Stryker exclusive with CPM M4 blade, CF scales, blue standoffs. Light use/carry and sharpen, some snail trails on liners (see centering pic). Box and bag included. Centering a tad off but that's where it adjusted well for action/lockup/no rub.
Benchmade 615 Mini Rukus - Sold. Used and sharpened. Later production blade without the Blackwood maker's mark on the back side. Comes with an unmarked older grey Benchmade service box. Clip has been replaced with an MXG Gear clip that is slightly shorter and wider but much sturdier than the Benchmade original. Original clip is included but I don't recommend it; feels too flimsy for weight of the knife.
https://imgur.com/a/yXfe4Rr
Benchmade 710-1401 - Sold. KW exclusive with M390 blade, slightly contoured + sculpted layered blue/black G10 scales, and blue standoffs. LNIB, box and bag included. This is a backup I never used. (also, these take navy RIT dye really nicely if the blue on the scales is too bright for you - here's another I did: https://i.imgur.com/DBAYuJ3.jpg)
https://imgur.com/a/iEHraGq
Benchmade 806D2 - Sold. Bought in used condition and re-ground to FFG+swedge by REK about 10 years ago now, left belt finish. No box. Used and sharpened, though mostly only touchups on the sharpmaker after Josh got it nice and thin behind the edge. Really nice slicing 806.
https://imgur.com/a/J6Fos7G
Spyderco Paramilitary 2 C81GM4P2 - Sold. BHQ version with CPM M4 blade and G10 scales. LNIB, box etc included. Action seems a little stiff but probably has something to do with only ever being opened a couple times - this is a backup I never used.
https://imgur.com/a/qlac6gi
Spyderco Delica 4 C11FPBLM390 - Sold. BBS exclusive with royal blue FRN and M390 blade. LNIB, box etc included. This is a backup I never used.
https://imgur.com/a/ueMoGa1
Spyderco Domino C172GBLTIP - $200. BBS exclusive with blue G10 and CTS-204P blade. Used and sharpened, box etc included. Minor snail trails on lock side, and G10 wear a little uneven on front due to carrying with clip set left-handed.
https://imgur.com/a/HRofRt9
Spyderco Native 5 C41CFP5 - $130. LE with peel-ply CF scales and CPM S110V blade. Used and sharpened, box etc included. Note it does have liners if that's important for any upgrade projects. Questionable aesthetics on my sharpening job (learning to sharpen S110V, sorry) and a bit of lock rock are why this is priced below a new lightweight S30V Native 5.
https://imgur.com/a/CLmX891
Thanks!
Hi all,
Been a while since I've done this but need to downsize the collection. Mix of users and LNIB here but most are at least light users, so please read descriptions and look through pics. Pics should be decent resolution - if you're just seeing the lower res imgur album versions consider right-clicking or long-pressing and "Open image in new tab" to get the full resolution version.
Prices are Paypal G&S, shipped USPS small flat rate priority. Prefer to deal with established paid members (can DM), within US. Not interested in trades, strictly downsizing here. Thanks!
Username proof pic:
ZT 0393 - Sold. Used and sharpened, no box.
ZT 0357 - Sold. Used and sharpened, no box. Fires hard and locks up well but centering a bit off and the torsion bar rattles a bit - feel free to open it up and pack a little grease in there if the rattle's a concern for you. Some wear on the paint on the clip, and G10 wear a little uneven on front due to carrying with clip set left-handed. .
ZT 0801BRWCF - $400. Light use/carry and sharpened. Box included. Not at all a hard user. If I added any scratches the wash hides them pretty well - sharpened edge is main thing that looks non-factory to me.
Hinderer Firetac Recurve - $300. Used and sharpened. Black G10, battle bronze. Box, tri-way hardware, extra skiffs, extra thumb disk with more shine (have not tried to install skiffs or extra disk; previous owner included them) included. Some scratches on blade in the right light, stonewash hides them at other angles. Snail trails on lock side, esp in one spot on lock bar and around pivot. See pics.
Benchmade 908BK-1501 - Sold. KSF Axis Stryker exclusive with CPM M4 blade, CF scales, blue standoffs. Light use/carry and sharpen, some snail trails on liners (see centering pic). Box and bag included. Centering a tad off but that's where it adjusted well for action/lockup/no rub.
Benchmade 615 Mini Rukus - Sold. Used and sharpened. Later production blade without the Blackwood maker's mark on the back side. Comes with an unmarked older grey Benchmade service box. Clip has been replaced with an MXG Gear clip that is slightly shorter and wider but much sturdier than the Benchmade original. Original clip is included but I don't recommend it; feels too flimsy for weight of the knife.
https://imgur.com/a/yXfe4Rr
Benchmade 710-1401 - Sold. KW exclusive with M390 blade, slightly contoured + sculpted layered blue/black G10 scales, and blue standoffs. LNIB, box and bag included. This is a backup I never used. (also, these take navy RIT dye really nicely if the blue on the scales is too bright for you - here's another I did: https://i.imgur.com/DBAYuJ3.jpg)
https://imgur.com/a/iEHraGq
Benchmade 806D2 - Sold. Bought in used condition and re-ground to FFG+swedge by REK about 10 years ago now, left belt finish. No box. Used and sharpened, though mostly only touchups on the sharpmaker after Josh got it nice and thin behind the edge. Really nice slicing 806.
https://imgur.com/a/J6Fos7G
Spyderco Paramilitary 2 C81GM4P2 - Sold. BHQ version with CPM M4 blade and G10 scales. LNIB, box etc included. Action seems a little stiff but probably has something to do with only ever being opened a couple times - this is a backup I never used.
https://imgur.com/a/qlac6gi
Spyderco Delica 4 C11FPBLM390 - Sold. BBS exclusive with royal blue FRN and M390 blade. LNIB, box etc included. This is a backup I never used.
https://imgur.com/a/ueMoGa1
Spyderco Domino C172GBLTIP - $200. BBS exclusive with blue G10 and CTS-204P blade. Used and sharpened, box etc included. Minor snail trails on lock side, and G10 wear a little uneven on front due to carrying with clip set left-handed.
https://imgur.com/a/HRofRt9
Spyderco Native 5 C41CFP5 - $130. LE with peel-ply CF scales and CPM S110V blade. Used and sharpened, box etc included. Note it does have liners if that's important for any upgrade projects. Questionable aesthetics on my sharpening job (learning to sharpen S110V, sorry) and a bit of lock rock are why this is priced below a new lightweight S30V Native 5.
https://imgur.com/a/CLmX891
Last edited:
