Hello all, I’m back after such a long time. I have some new hobbies to fund so I’m looking to offload some knives to get them started!
All of these knives have been handpicked by me, most of them out of a batch of like knives. They all lock up solid and have been treated very well.
As such, they have all been used to a varying degree, with cardboard and opening a beer/sodas on the back of the blade being the toughest task they’ve had in my ownership.
They have all been touched up with the Edge Pro Apex to a mirror edge except for the Dragonfly and the 535FE-05. Granted, some have lost the sheen since. But have stayed sharp with the help of a micro bevel from a Spyderco Sharpmaker.
I have the boxes for all but two - the 710 and the 940-2.
Shipping to CONUS only, I will cover shipping via a USPS flat rate box. Buyers must be 18+ and aware of any and all knife laws governing their area of residence/travel. All buyers agree that I am not responsible for the misuse of any of the knives I sell before buying.
Here is an Imgur link to everything I have for sale:
1.) Benchmade 710 in ATS-34
Black scales, black blade. This one was well used before I got it, but is rock solid and shows no sign of abuse. The coating on the blade is mostly worn off. It is centered, and an astounding example of what a classic Benchmade is like after a lot of years. No box.
I’m asking $150 shipped
2.) Custom Griptilian CU551-BK-20CV
Black scales, black blade, CPM-20CV. This one was a gift to myself a couple years back. I bought it with the intention of beating the hell out of it, but I never did. I felt too bad. I opened a lot of beers and sodas with the back of the blade however. It has seen the most cardboard duty of my knives, but the coating has been holding up ok.
I have an extra set of OD Green OEM scales for it.
I’m asking $140 shipped
3.) 940-2
S30V, plain edge. This one was bought at a pawn shop because it had been smashed by something big. I sent it off to warranty, and they replaced everything except for the axis lock bar, and the pocket clip. It is a shining example of a 940. I’ve carried it a lot, but haven’t cut much with it.
I don’t mind if it doesn’t sell. I don’t have a box for it, but I do have the old s30v serrated blade for it as well.
I’m asking $120 shipped.
4.) 940-04
Awesome knife, I have 3.
M390 plain edge.
Not much to say, I sharpened it, carried it for a few days and ended up with a couple of new ones in box from a trade I had made. So this one is on the chopping block.
I’m asking $160 shipped.
5.) Bugout custom in MagnaCut
Custom shop with non-coated, plain edge MagnaCut. Carried literally twice, but dinged the black thumb studs on a countertop and scratched some anodization off em. Grey grivory handles were not the shade I had thought they would be. I am including an extra set of Flytanium handles in black G10.
I’m asking $140 shipped.
6.) Bugout 535FE-05
My favorite color combo, but I have a spare new one in box, so this one’s gotta go. FDE coating is showing wear from cardboard. S30V blade.
I am including a set of G10 scales I bought off Etsy thinking I could match the blue grivory. They are close, but not enough for me.
I’m asking $120 shipped.
7.) Bugout 535
Classic blue grivory with satin blade… with a twist. I had swapped in an s90v blade from a CF Bugout. Lockup is solid and smooth as hell. I love it and I won’t mind if it doesn’t sell. Barely used, and lightly carried. I’m also including a set of Blue G10 Flytanium scales.
I’m asking $160 shipped.
8.) Spyderco Dragonfly in Spy27
C28PCBL2 Dragonfly. Turns out it’s too small for me, the Bugout fits me better for a small knife. Carried a few times while I tried getting used to it and put on cardboard duty. Blade barely shows any wear but you can pick up some hairlines. I am including a set of Flytanium Ti scales with it, but they were blasted and “stonewashed” by me.
I’m asking $70 shipped.
.
.
.
And that’s all! Prices are pretty much set, but if I am off on pricing please let me know. As always, first come, first served. Dibs are respected, but I do require some communication so that I can entertain offers as well. Thanks for your time, send me a message, I can send over close ups and specifics that you want to know/see!
(Same link as above)
All of these knives have been handpicked by me, most of them out of a batch of like knives. They all lock up solid and have been treated very well.
As such, they have all been used to a varying degree, with cardboard and opening a beer/sodas on the back of the blade being the toughest task they’ve had in my ownership.
They have all been touched up with the Edge Pro Apex to a mirror edge except for the Dragonfly and the 535FE-05. Granted, some have lost the sheen since. But have stayed sharp with the help of a micro bevel from a Spyderco Sharpmaker.
I have the boxes for all but two - the 710 and the 940-2.
Shipping to CONUS only, I will cover shipping via a USPS flat rate box. Buyers must be 18+ and aware of any and all knife laws governing their area of residence/travel. All buyers agree that I am not responsible for the misuse of any of the knives I sell before buying.
Here is an Imgur link to everything I have for sale:
1.) Benchmade 710 in ATS-34
Black scales, black blade. This one was well used before I got it, but is rock solid and shows no sign of abuse. The coating on the blade is mostly worn off. It is centered, and an astounding example of what a classic Benchmade is like after a lot of years. No box.
I’m asking $150 shipped
2.) Custom Griptilian CU551-BK-20CV
Black scales, black blade, CPM-20CV. This one was a gift to myself a couple years back. I bought it with the intention of beating the hell out of it, but I never did. I felt too bad. I opened a lot of beers and sodas with the back of the blade however. It has seen the most cardboard duty of my knives, but the coating has been holding up ok.
I have an extra set of OD Green OEM scales for it.
I’m asking $140 shipped
3.) 940-2
S30V, plain edge. This one was bought at a pawn shop because it had been smashed by something big. I sent it off to warranty, and they replaced everything except for the axis lock bar, and the pocket clip. It is a shining example of a 940. I’ve carried it a lot, but haven’t cut much with it.
I don’t mind if it doesn’t sell. I don’t have a box for it, but I do have the old s30v serrated blade for it as well.
I’m asking $120 shipped.
4.) 940-04
Awesome knife, I have 3.
M390 plain edge.
Not much to say, I sharpened it, carried it for a few days and ended up with a couple of new ones in box from a trade I had made. So this one is on the chopping block.
I’m asking $160 shipped.
5.) Bugout custom in MagnaCut
Custom shop with non-coated, plain edge MagnaCut. Carried literally twice, but dinged the black thumb studs on a countertop and scratched some anodization off em. Grey grivory handles were not the shade I had thought they would be. I am including an extra set of Flytanium handles in black G10.
I’m asking $140 shipped.
6.) Bugout 535FE-05
My favorite color combo, but I have a spare new one in box, so this one’s gotta go. FDE coating is showing wear from cardboard. S30V blade.
I am including a set of G10 scales I bought off Etsy thinking I could match the blue grivory. They are close, but not enough for me.
I’m asking $120 shipped.
7.) Bugout 535
Classic blue grivory with satin blade… with a twist. I had swapped in an s90v blade from a CF Bugout. Lockup is solid and smooth as hell. I love it and I won’t mind if it doesn’t sell. Barely used, and lightly carried. I’m also including a set of Blue G10 Flytanium scales.
I’m asking $160 shipped.
8.) Spyderco Dragonfly in Spy27
C28PCBL2 Dragonfly. Turns out it’s too small for me, the Bugout fits me better for a small knife. Carried a few times while I tried getting used to it and put on cardboard duty. Blade barely shows any wear but you can pick up some hairlines. I am including a set of Flytanium Ti scales with it, but they were blasted and “stonewashed” by me.
I’m asking $70 shipped.
.
.
.
And that’s all! Prices are pretty much set, but if I am off on pricing please let me know. As always, first come, first served. Dibs are respected, but I do require some communication so that I can entertain offers as well. Thanks for your time, send me a message, I can send over close ups and specifics that you want to know/see!
(Same link as above)
Attachments
Last edited:
