Consolidated Trade Offerings
Top Left: Benchmade Stryker, ATS-34, PreProduction run, Very Lightly carried. Very little actual use. Can't find box or papers. Not sure if it's the 905 or 910 TRADED
Top Right: Kershaw Mini Cyclone ZPD. Sharpened/thinned out on EdgePro
Top Middle:
Spyderco Resilence, don't believe it's been carried or sharpened
Strider Ranger Green Recurve SMF, sharpened/thinned edge and carried, good lockup, off center but not rubbing.
Strider DGG SnG, sharpened and carried. has just a touch of lock rock which I will take consideration of when assigning worth. Traded
ZT 0300, only touched to put the lanyard on and test cut paper. Traded
ZT 0350, very lightly carried
Left:
DDR Custom Gunhammer MT Assisted with brown inlay, one of the first I believe. Sharpened and carried. Tentatively TRADED
Right:
SwampRat Vex sharpened, Recurve Rd/Blk handle in a PPKS sheath with Teklok
Additional Pics:
The wetness is WD-40 and you can't look at the DLC without it smudging..
Orange/Grn Knife/Sheath NOT FOR TRADE
The wetness is WD-40
Top Left:
Kershaw JYD II Traded
Top Right:
Ontario RAT 7 in D2. Thinned out but never carried. Dusty from sitting on shelf but really sharp.
Kershaw Ener-G. Very lightly carried
Benchmade 960SLV Osbourne AL w/G10 Never used never carried Sold
Benchmade 940 Osbourne Axis, lightly carried Traded
Gerber Hinderer Fire something or other IIRC, badly sharpened but sharp Traded
CRK Small Website Graphic Sebenza with 1 S30V blade, 1 Damascus blade, and an IT BABE Engraving
They didn't have any damascus when I originally ordered it with a S30V blade and engraved with IT BABE as that is what my boss was calling me at the time. Then, after the damascus came in, I sent it back to be fitted for the new blade. Very lightly carried when it had the S30V blade, don't believe it was carried after the damascus one was installed. Can't locate the box and papers, I'm thinking CRK kept them when I sent it back to get the Damascus blade... so it will NOT come with them.
Ok, new deal on the Web Sight Sebbie. I rebuilt it with the original S30V blade and bushing so it's back to stock. IF someone buys the Devin Thomas Damascus blade I will split them up. For that to happen the person needs to understand that to my knowledge each blade is matched to a specific lockbar so I can't guarantee fit and I'm not going to let anyone 'test it out'. If you trade into the Damascus blade separately it will be AS IS. Also, still can't find the box so it will NOT be included.
Note: A couple of people have wanted the knife but couldn't get over the engraving, doesn't anyone know a hot IT person that likes knives? Guy or Girl? OR... think of all the words you could have engraved before the IT BABE. Suck, Lick, Spank.. think of the possibilities..
The knife is centered but I had it cocked a bit in the pic. :-(
On one side of the blade there is a small section where it looks like fine lines in the edge bevel which you should be able to see in the pic. The blade was always covered in Tuff Cloth residue so I'm not sure if it's very fine rust or just the grain of the Damascus. If it's rust it will be gone after the first sharpening, if not it's part of the Damascus.
Brous Mini-Division Flipper in D2, Very Very Good condition. Only issue are 3 dings in the G10 on the end of the handle slabs, 2 on one side one on the other. They are very small and blend in due to the color of the handle. Otherwise it locks up tight, blade is centered, and it flips very fast.
Swamp Rat Tan BattleGuard with Stock Sheath
Looks to be mint with some very light smoothing from the sheath. Just noticed how dusty the sheath is, I'll see if I can't get it blown out directly.
Busse Skinny ASH and SarSquatch Kydex Sheaths
Skinny ASH Sheath - Buy Brown
SarSquatch Sheath - Unknown maker. Fits but isn't top of the line..
Azwelke Red Swamp Rat Rodent 4 Kydex Sheath TekLok not included - fits pretty snug
Busse AD Kydex Sheath, unknown maker (Onscene Tactical?) - fits snug Was formed around a .20 Sabre ground AD.
Disclaimer: I reserve the right to refuse trade without explanation... You must be 18 years of age and the knife must be legal to own by you and in your municipality of residence. I ship USPS Priority Insured w/tracking. I'd also rather not lie on any Customs forms. PM me here or send me an email @ bladeforums//@//mckean\\dot\\com with any questions/comments/complaints.
The main trade things I'm looking for.. (Might be able to do cash up or down depending on when you catch me.)
NO COMBO OR SERRATED EDGES, AUTOs, BALIs
BUSSE BOSS STREET
Midsized to small Busse Family (SNFO, Infidu, BATAC, Rodent Solution, HRLM.. Boss Street takes precedence)
ZT 0562CF
Fehrman First Strike
Strider CC SMF with SOLID lockup
Strider Tanto SMF
Thanks,
Greg (bladeforums AT McKean DoT COM)
Top Left: Benchmade Stryker, ATS-34, PreProduction run, Very Lightly carried. Very little actual use. Can't find box or papers. Not sure if it's the 905 or 910 TRADED
Top Right: Kershaw Mini Cyclone ZPD. Sharpened/thinned out on EdgePro
Top Middle:
Spyderco Resilence, don't believe it's been carried or sharpened
Strider Ranger Green Recurve SMF, sharpened/thinned edge and carried, good lockup, off center but not rubbing.
Strider DGG SnG, sharpened and carried. has just a touch of lock rock which I will take consideration of when assigning worth. Traded
ZT 0300, only touched to put the lanyard on and test cut paper. Traded
ZT 0350, very lightly carried
Left:
DDR Custom Gunhammer MT Assisted with brown inlay, one of the first I believe. Sharpened and carried. Tentatively TRADED
Right:
SwampRat Vex sharpened, Recurve Rd/Blk handle in a PPKS sheath with Teklok
Additional Pics:
The wetness is WD-40 and you can't look at the DLC without it smudging..
Orange/Grn Knife/Sheath NOT FOR TRADE
The wetness is WD-40
Top Left:
Kershaw JYD II Traded
Top Right:
Ontario RAT 7 in D2. Thinned out but never carried. Dusty from sitting on shelf but really sharp.
Kershaw Ener-G. Very lightly carried
Benchmade 960SLV Osbourne AL w/G10 Never used never carried Sold
Benchmade 940 Osbourne Axis, lightly carried Traded
Gerber Hinderer Fire something or other IIRC, badly sharpened but sharp Traded
CRK Small Website Graphic Sebenza with 1 S30V blade, 1 Damascus blade, and an IT BABE Engraving
They didn't have any damascus when I originally ordered it with a S30V blade and engraved with IT BABE as that is what my boss was calling me at the time. Then, after the damascus came in, I sent it back to be fitted for the new blade. Very lightly carried when it had the S30V blade, don't believe it was carried after the damascus one was installed. Can't locate the box and papers, I'm thinking CRK kept them when I sent it back to get the Damascus blade... so it will NOT come with them.
Ok, new deal on the Web Sight Sebbie. I rebuilt it with the original S30V blade and bushing so it's back to stock. IF someone buys the Devin Thomas Damascus blade I will split them up. For that to happen the person needs to understand that to my knowledge each blade is matched to a specific lockbar so I can't guarantee fit and I'm not going to let anyone 'test it out'. If you trade into the Damascus blade separately it will be AS IS. Also, still can't find the box so it will NOT be included.
Note: A couple of people have wanted the knife but couldn't get over the engraving, doesn't anyone know a hot IT person that likes knives? Guy or Girl? OR... think of all the words you could have engraved before the IT BABE. Suck, Lick, Spank.. think of the possibilities..
The knife is centered but I had it cocked a bit in the pic. :-(
On one side of the blade there is a small section where it looks like fine lines in the edge bevel which you should be able to see in the pic. The blade was always covered in Tuff Cloth residue so I'm not sure if it's very fine rust or just the grain of the Damascus. If it's rust it will be gone after the first sharpening, if not it's part of the Damascus.
Brous Mini-Division Flipper in D2, Very Very Good condition. Only issue are 3 dings in the G10 on the end of the handle slabs, 2 on one side one on the other. They are very small and blend in due to the color of the handle. Otherwise it locks up tight, blade is centered, and it flips very fast.
Swamp Rat Tan BattleGuard with Stock Sheath
Looks to be mint with some very light smoothing from the sheath. Just noticed how dusty the sheath is, I'll see if I can't get it blown out directly.
Busse Skinny ASH and SarSquatch Kydex Sheaths
Skinny ASH Sheath - Buy Brown
SarSquatch Sheath - Unknown maker. Fits but isn't top of the line..
Azwelke Red Swamp Rat Rodent 4 Kydex Sheath TekLok not included - fits pretty snug
Busse AD Kydex Sheath, unknown maker (Onscene Tactical?) - fits snug Was formed around a .20 Sabre ground AD.
Disclaimer: I reserve the right to refuse trade without explanation... You must be 18 years of age and the knife must be legal to own by you and in your municipality of residence. I ship USPS Priority Insured w/tracking. I'd also rather not lie on any Customs forms. PM me here or send me an email @ bladeforums//@//mckean\\dot\\com with any questions/comments/complaints.
The main trade things I'm looking for.. (Might be able to do cash up or down depending on when you catch me.)
NO COMBO OR SERRATED EDGES, AUTOs, BALIs
BUSSE BOSS STREET
Midsized to small Busse Family (SNFO, Infidu, BATAC, Rodent Solution, HRLM.. Boss Street takes precedence)
ZT 0562CF
Fehrman First Strike
Strider CC SMF with SOLID lockup
Strider Tanto SMF
Thanks,
Greg (bladeforums AT McKean DoT COM)
Last edited:
