-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
"Old Knives"
- Thread starter VCM3
- Start date
- Joined
- Feb 21, 2006
- Messages
- 4,677
That's a good looking old knife knowtracks. I think they are both much sharpened pen blades. This is a two-blade version without the file.
.
It's funny seeing a knife make its rounds...
- Joined
- Oct 26, 2005
- Messages
- 16,759
R 1253
Quote :
"I've had the good fortune to be able to handle quite a few Remington Bullet knives over the last 40 years or so. This is the nicest I've seen to date. Unused, only handling marks. Spent most of its life in a display case in a small hardware store. They were a Remington knife dealer and bought it years ago to display and bring in customers. Things to notice are : blade finish - completely glazed on the reverse, glazed on the lower cutting edge of the front, crocus polished on the front above the grind line extending all the way onto and including the tang, to provide a smooth surface for the blade etch. This is how the tang stamps, blade etch, and finish treatment of the blade should appear on an original knife. Bullet shield is secured through the liner with two pins. Larger of two blade etch scans also shows why one should always wipe off a knife or gun when done handling it. Finger prints etch blades as well as the factory did. The bone on these knives is not called Remington bone, however it is very typical of Remington knives of this period and was used to haft literally tens of thousands of their knives. Most genuine Remington knives one sees ( large or small) that are hafted in bone will have this color and jigging pattern."
Quote :
"I've had the good fortune to be able to handle quite a few Remington Bullet knives over the last 40 years or so. This is the nicest I've seen to date. Unused, only handling marks. Spent most of its life in a display case in a small hardware store. They were a Remington knife dealer and bought it years ago to display and bring in customers. Things to notice are : blade finish - completely glazed on the reverse, glazed on the lower cutting edge of the front, crocus polished on the front above the grind line extending all the way onto and including the tang, to provide a smooth surface for the blade etch. This is how the tang stamps, blade etch, and finish treatment of the blade should appear on an original knife. Bullet shield is secured through the liner with two pins. Larger of two blade etch scans also shows why one should always wipe off a knife or gun when done handling it. Finger prints etch blades as well as the factory did. The bone on these knives is not called Remington bone, however it is very typical of Remington knives of this period and was used to haft literally tens of thousands of their knives. Most genuine Remington knives one sees ( large or small) that are hafted in bone will have this color and jigging pattern."
waynorth
Knifemaker / Craftsman / Service Provider
- Joined
- Nov 19, 2005
- Messages
- 32,619
Dazzling Remington, simply dazzling! They really figured out how to make and present a knife! As a famous man once said, "Get in my pocket!"!
Who was that man??
Post some more pics of that knife, willya Vince??
Wow, that was fast!!
Who was that man??
Post some more pics of that knife, willya Vince??
Wow, that was fast!!
Last edited:
waynorth
Knifemaker / Craftsman / Service Provider
- Joined
- Nov 19, 2005
- Messages
- 32,619
Vince, you zeroed in on a rare duck! it's sorta like a three backspring whittler, but with 3 full length blades. It was in Camillus's pattern drawer at one time, and was given to Phil Gibbs, by Albert Baer. Might be the only one!!
- Joined
- Oct 26, 2005
- Messages
- 16,759
Brown Bros. Whittler
"3 1/4 " closed carved bone whittler w / decorated bolsters and a Stanhope viewer in the rear bolster. The Brown Bros started Union Razor Co around 1900 which eventually was named Kabar around WWII. They had these made in Germany and brought them here to be sold under their name prior to or around that time. They were only made and sold for a few years. The Stanhope viewer is perfectly intact and crystal clear, however it's image has deteriorated over time and is no longer recognizable. These viewers were popular around the turn of the century and put into a variety of items, some knife bolsters for one. Fairly scarce knife, still tight as new and quite snappy in spite of its heavy use, very well made. "
"3 1/4 " closed carved bone whittler w / decorated bolsters and a Stanhope viewer in the rear bolster. The Brown Bros started Union Razor Co around 1900 which eventually was named Kabar around WWII. They had these made in Germany and brought them here to be sold under their name prior to or around that time. They were only made and sold for a few years. The Stanhope viewer is perfectly intact and crystal clear, however it's image has deteriorated over time and is no longer recognizable. These viewers were popular around the turn of the century and put into a variety of items, some knife bolsters for one. Fairly scarce knife, still tight as new and quite snappy in spite of its heavy use, very well made. "
- Joined
- Sep 1, 2001
- Messages
- 1,278
All Great Knives Vince and Charlie man thanks for posting them. Vince that R 1253 Remington Lockback, that is the grail Knife to me AMAZING!!!. You are 100% correct the bone on Remington bone scaled knives was never called Remington bone.. I know a man about my age who's dad owned a hardware store and was a Remington Firearms and Cutlery dealer. This guy has quite a Remington Firearms and knife collection, he is very low keyed and doesn't show his collection, I guess his children will have quite a time some day. Thanks again for posting this one...
