Thank you very much for taking the time to look at my post.
You are welcome to text, PM or email
William Chu, aka 10after10
Tel: (77 three) 25 five - 044 four
pagoda1970s AT gmail DOT com
***PLEASE! read Terms & Conditions***
- Available until I indicate "SOLD".
- Please ask ALL questions before committing to buy.
- Item will be sold to FIRST PERSON TO ACTUALLY REACH ME with unconditional "I will take it". Texting is fastest.
- I will confirm sale by providing you with payment instructions.
- Please be prepared to pay at the time you claim knife/item. PROMPT PAYMENT expected and appreciated.
- If your name is not on PayPal account or you want me to ship to address different than on PayPal account, please CONTACT ME FIRST.
- I offer return, if and ONLY if knife is not accurately described in post and pics.
- International Buyers are Welcome, please ask about shipping and terms. If you are not physically in the US or your PayPal account is based outside of USA, YOU MUST CONTACT ME BEFORE COMMITTING TO BUY.
***REGARDING TRADES***
Although my FIRST PREFERENCE IS TO SELL OUTRIGHT, I'm willing to consider any potential trades (non knife OK too), up or down. Please provide full description including applicable details such as blade centering, blade play, lock stick, whether or not knife has been used, carried or sharpened and if box & papers are included.
--------------------------------------------------------------------------------------------------------------------------------------------------
1. Hinderer XM-18 3" Full Ti, Gen 2
Please click HERE to see additional pics.
Wanna own some Hinderer history? Just got this back from Hinderer for a factory sharpening/tune up. Not used, or carried since. This is a Gen 2 manufactured between 2009-14. In original configuration with full Ti handles and STERILE slicer grind blade. Blade steel is not marked, but Hinderer was using Duratech 20CV, CTS-XHP, S35VN and CTS-40CP at the time. If you're not familiar with pre Tri-Way Hinderers, the detent was designed to be on the softer side, and that's according to Rick Hinderer himself. So it takes a bit of wrist action to flip the blade open. Very good overall condition. Blade is in excellent condition and very sharp. No obvious signs of wear or use due to stonewashed finish. Original bronze finish Ti scales are in good to very good condition. Again, no major obvious signs of use due to stonewashed finish. Depending on lighting conditions, the bronze handles and pocket clip has pops of blue, purple and copper. Clip has some superficial scratches but they blend in so well with the finish, they look almost original. Every screw is is in great shape. Nothing stripped or mangled. Comes with original large Hinderer box with Hinderer Made in the USA
label on one end and Hinderer Knives 25 Years (not 35 Years like current labels) label on other end. At the time, these didn't come in the smaller boxes with labels to indicate configuration. FIIz Also comes with original hand written price tag stating "Production Ti Scale, $585".
Overall Length: 7"
Blade Length: 3"
Weight: 3.8 oz
SOLD
2. Ontario XM-2
Please click HERE to see additional pics.
Meets US military specifications and carried by members of the US Armed Forces. Made in Italy with N690 blade steel, aircraft grade aluminum handles and titanium liner lock. Excellent overall condition with minimal signs of carry and use. Blade is perfectly dead centered. No play in any direction. No lock stick. No nicks, chips or rolls on SHARP original Ontario edge. Handles barely show any signs of carry. Reversible tip down pocket clip is missing a bit of black finish right along the edge. Every screw is in excellent shape. Nothing stripped or mangled. Blade deploys smoothly using thumb studs. Comes as knife only. TEc Original sold for $175.
Overall Length: 8"
Blade Length: 3.4"
Weight: 5.5 oz
SOLD
I ALSO HAVE SOME OTHER ITEMS FOR SALE, PLEASE SEE BELOW:
Microtech Ram-Lok
Zero Tolerance 0990
$125 Sunglasses for $60
Limited Edition Black Titanium Seiko Dive Watch
You are welcome to text, PM or email
William Chu, aka 10after10
Tel: (77 three) 25 five - 044 four
pagoda1970s AT gmail DOT com
***PLEASE! read Terms & Conditions***
- Available until I indicate "SOLD".
- Please ask ALL questions before committing to buy.
- Item will be sold to FIRST PERSON TO ACTUALLY REACH ME with unconditional "I will take it". Texting is fastest.
- I will confirm sale by providing you with payment instructions.
- Please be prepared to pay at the time you claim knife/item. PROMPT PAYMENT expected and appreciated.
- If your name is not on PayPal account or you want me to ship to address different than on PayPal account, please CONTACT ME FIRST.
- I offer return, if and ONLY if knife is not accurately described in post and pics.
- International Buyers are Welcome, please ask about shipping and terms. If you are not physically in the US or your PayPal account is based outside of USA, YOU MUST CONTACT ME BEFORE COMMITTING TO BUY.
***REGARDING TRADES***
Although my FIRST PREFERENCE IS TO SELL OUTRIGHT, I'm willing to consider any potential trades (non knife OK too), up or down. Please provide full description including applicable details such as blade centering, blade play, lock stick, whether or not knife has been used, carried or sharpened and if box & papers are included.
--------------------------------------------------------------------------------------------------------------------------------------------------
1. Hinderer XM-18 3" Full Ti, Gen 2
Please click HERE to see additional pics.
Wanna own some Hinderer history? Just got this back from Hinderer for a factory sharpening/tune up. Not used, or carried since. This is a Gen 2 manufactured between 2009-14. In original configuration with full Ti handles and STERILE slicer grind blade. Blade steel is not marked, but Hinderer was using Duratech 20CV, CTS-XHP, S35VN and CTS-40CP at the time. If you're not familiar with pre Tri-Way Hinderers, the detent was designed to be on the softer side, and that's according to Rick Hinderer himself. So it takes a bit of wrist action to flip the blade open. Very good overall condition. Blade is in excellent condition and very sharp. No obvious signs of wear or use due to stonewashed finish. Original bronze finish Ti scales are in good to very good condition. Again, no major obvious signs of use due to stonewashed finish. Depending on lighting conditions, the bronze handles and pocket clip has pops of blue, purple and copper. Clip has some superficial scratches but they blend in so well with the finish, they look almost original. Every screw is is in great shape. Nothing stripped or mangled. Comes with original large Hinderer box with Hinderer Made in the USA
label on one end and Hinderer Knives 25 Years (not 35 Years like current labels) label on other end. At the time, these didn't come in the smaller boxes with labels to indicate configuration. FIIz Also comes with original hand written price tag stating "Production Ti Scale, $585".Overall Length: 7"
Blade Length: 3"
Weight: 3.8 oz
SOLD
2. Ontario XM-2
Please click HERE to see additional pics.
Meets US military specifications and carried by members of the US Armed Forces. Made in Italy with N690 blade steel, aircraft grade aluminum handles and titanium liner lock. Excellent overall condition with minimal signs of carry and use. Blade is perfectly dead centered. No play in any direction. No lock stick. No nicks, chips or rolls on SHARP original Ontario edge. Handles barely show any signs of carry. Reversible tip down pocket clip is missing a bit of black finish right along the edge. Every screw is in excellent shape. Nothing stripped or mangled. Blade deploys smoothly using thumb studs. Comes as knife only. TEc Original sold for $175.
Overall Length: 8"
Blade Length: 3.4"
Weight: 5.5 oz
SOLD
I ALSO HAVE SOME OTHER ITEMS FOR SALE, PLEASE SEE BELOW:
Microtech Ram-Lok
Zero Tolerance 0990
$125 Sunglasses for $60
Limited Edition Black Titanium Seiko Dive Watch
Last edited: