Post Blade Show knives.

Status
Not open for further replies.
Feedback: +20 / =0 / -0
Joined
Feb 11, 2003
Messages
1,628
First I would like to say a BIG THANK YOU to everyone that stopped by the table at Blade! YOU ALL made the show a success!! THANK YOU!

As usual I didn't get anywhere close to all the knives I was working on finished... that works out good for all of you that couldn't make it to the Blade show!! :) Here are a few knives that I either brought back or sharpened up this morning.

From left to right.

1. Bushcraft in A2 with polished black canvas micarta with red liners and a mosaic pin. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $285.00/SOLD

2. Bushcraft in A2 with polished black canvas micarta with red liners. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $275.00/SOLD

3. XL Bushcraft in A2 with polished black canvas micarta with red liners and a mosaic pin. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $305.00/SOLD

4. XL Bushcraft in A2 with polished brown canvas micarta with black liners and a mosaic pin. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $305.00/SOLD

5. XL Bushcraft in A2 with blasted black canvas micarta with red liners. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $295.00


PostBladeSale060901.jpg


Custom neckers... from top left and going clockwise.

1. Drop Point Cicada in CPM 3V with neck sheath. $125.00/SOLD

2. Clip Point Cicada in CPM 3V wtih neck sheath. $125.00

3. Dogfish in CPM 154 with neck sheath. $125.00

PostBladeSale060902.jpg


From Left to Right.

1. TK-11 B&T in CPM 3V with carbon fiber scales, white liners and mosaic pin. Comes with multi position kydex sheath with small Tek-Lok. $310.00/SOLD

2. Mini-Skinner in CPM M4 with textured orange G-10 scales with black liners. Thumb serrations. Comes with multi-Position kydex sheath with small Tek-Lok. $280.00/SOLD

3. TK-1 Necker in CPM 3V with some nice stag with black liners. Comes with kydex neck/pocket sheath. $320.00/SOLD

PostBladeSale060903.jpg


This is a new Pikal model that I introduced at the Blade Show. Its called the Bodkin. Its 6 3/8" overall with a blade length just under 3". These are both carbidized Titanium with textured carbon fiber scales. They have a smoke finish on the flats and a satin finish on the blade bevels for a nice two tone look. They are set up with kydex sheaths with Tactical Tethers from Mercop.

1. Bodkin with green liners. $320.00

2. Bodkin with blue liners. $320.00

PostBladeSale060904.jpg


From top to bottom...

1. Broadhead in carbidized Titanium with textured dark earth G-10 scales and black liners. Two tone finish with satin bevels and smoked finish on the flats. This is sharpened on both edges. Comes with kydex sheath set up on a Tactical Tether. $360.00/SOLD

2. Broadhead in carbidized Titanium with textured carbon fiber scales and green liners. Two tone finish with satin bevels and smoked finish on the flats. This is sharpened on both edges. Comes with kydex sheath set up on a Tactical Tether. $405.00?SOLD

PostBladeSale060905.jpg


HERE IS THE SMALL PRINT....

Shipping is $10.00/package CONUS and $15.00 international.
I can accept paypal, or check/money order.
If you would like one of the above knives please PM me or post below.


THANKS for your support!


Tom
 
Last edited:
I'm gonna take this one Tom:
1. Bushcraft in A2 with polished black canvas micarta with red liners and a mosaic pin. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $285.00

Tom,
Just got the knife - WOAH! I AM BLOWN AWAY! My first from you and better than I imagined. Fits like a glove and it's built like brick hsit house.
N
 
Last edited:
I'm gonna take this one Tom:
1. Bushcraft in A2 with polished black canvas micarta with red liners and a mosaic pin. Thumb serrations. Comes with multi position kydex sheath with large Tek-Lok. $285.00

Its yours! THANKS!

Tom
 
I was lucky enough to get my first Krein at the show. Can't put it down.
 
Tom, I'll take the drop point Cicada necker, please confirm availability and I'll get you paid ASAP.

Thanks,
Josh
 
Wow! Just received my dogfish and had to force myself to put it down long enough to type this.

What to say? Perfect lines, perfect grind, great kydex, all the way down to the tiiiiiiny details on the bulldog etch, this knife reveals a stunning degree of craftsmanship for a little skelly necker. Not to mention the fact that I ordered late on Wednesday and have it in my hand on Saturday.

If this knife fairly represents Tom's other work, and I would bet it does, then I can't say enough in his favor. What a class act all around! :thumbup: :D

Thanks Tom!

dectia
 
I think you still have one available? If so, I would snag it and sent payment ASAP.

Thank you,
Bill

Still have a couple of the dogfish. Shoot me a PM or Email if you want one.

If the Clip Point Cicada is still available "I'll take it!".

Still have a couple of these also. Shoot me a PM and we will work out the details. I may be out of pocket for 2 days. Going to be out of the shop, just don't know if I'll have internet access or not... probably not.

PM and email sent.

Replied to.

Any Dogfish left ?

thank you

ELDE

Yes, let me know if you want one via PM and will hook you up. As stated above won't be back in the shop until Wednesday it looks like.

THANKS!

Tom
 
Still have a couple of these also. Shoot me a PM and we will work out the details. I may be out of pocket for 2 days. Going to be out of the shop, just don't know if I'll have internet access or not... probably not.

E-mail sent. Thanks mate.
 
Status
Not open for further replies.
Back
Top