- Joined
- Jun 25, 2007
- Messages
- 898
All my damascus is made from Aldo's 1084 and 15n20 and is rough ground. If you need to straighten the steel I suggest you do it while hot or at a minimum normalize the bar first; my straightening press hardens the steel. I can have the steel properly normalized or annealed by Randy Dewey. The cost is $13-$20. Heat treatment instructions are available on my web site or I can print a copy upon request.
225 layer random pattern.
The bars are whetted with oil to help show the pattern.
Bars 1-4 from top to bottom.
1)14.75"x1.2"x.15" +/- .005, the one end does taper to .27 at the very end.
sold
2)9"x1.3"x.13" +/- .02
sold
3)8.5"x1.2"x.11 +/- .02
sold
4)9.9"x1"x.11 +/- .01
shipped to one of my giveaway winners!
______________________________
225 layer raindrop pattern
Pattern on large bar
Large bar, there is a slight dip on one side that measures .13 but would be removed by grinding the bevel. Seen in top picture on the left side. The entire bar is damascus, just too large for my etching tank.
14"x1.5"x.171"
$175
Small bar
4.7"x1"x.17"
sold
____________________________
90 layer waterfall pattern
Bars 1-3 from top to bottom.
1) 12"x1.15"x.125"
$78 plus shipping
2) 8.125"x1.23"x.125"
$66 shipped
sold pending payment
3)6.125"x1.18x.11"
sold
_______________________________
36 layer twist pattern.
I left some of the forging pits in the bars to keep the prices lower.
Bars 1-5 from left to right.
1) 3.5x1.3x.3
$40
2)3.2x1.3x.3
$35
Bars 3, 4 and 5 are no longer for sale.
Sale prices!
$50+ is $5 off
$150+ is $20 off
$250+ is $40 off
I am also willing to do a 40 day lay away. 25% needs to be paid within 10 days, 50% by 25 days, and 100% by 40 days.
Thanks!
-Dan
225 layer random pattern.
The bars are whetted with oil to help show the pattern.
Bars 1-4 from top to bottom.
1)14.75"x1.2"x.15" +/- .005, the one end does taper to .27 at the very end.
sold
2)9"x1.3"x.13" +/- .02
sold
3)8.5"x1.2"x.11 +/- .02
sold
4)9.9"x1"x.11 +/- .01
shipped to one of my giveaway winners!
______________________________
225 layer raindrop pattern
Pattern on large bar
Large bar, there is a slight dip on one side that measures .13 but would be removed by grinding the bevel. Seen in top picture on the left side. The entire bar is damascus, just too large for my etching tank.
14"x1.5"x.171"
$175
Small bar
4.7"x1"x.17"
sold
____________________________
90 layer waterfall pattern
Bars 1-3 from top to bottom.
1) 12"x1.15"x.125"
$78 plus shipping
2) 8.125"x1.23"x.125"
$66 shipped
sold pending payment
3)6.125"x1.18x.11"
sold
_______________________________
36 layer twist pattern.
I left some of the forging pits in the bars to keep the prices lower.
Bars 1-5 from left to right.
1) 3.5x1.3x.3
$40
2)3.2x1.3x.3
$35
Bars 3, 4 and 5 are no longer for sale.
Sale prices!
$50+ is $5 off
$150+ is $20 off
$250+ is $40 off
I am also willing to do a 40 day lay away. 25% needs to be paid within 10 days, 50% by 25 days, and 100% by 40 days.
Thanks!
-Dan
Last edited:
