It's 15" overall and weighs 22.5 oz.
The blade is 1095 spring steel 10" X 1. 1/4" X 1/4" thick (3/8" at the blade catchers).
The guard, bolster, and pommel sides are 1018 steel WELDED
to the full tang.
The handle is 4. 3/4" long with scales of Curly Maple.
There is a 3/8" lanyard hole in the pommel (no lanyard incl.).
The sheath is 10 oz. leather with black steel rivets and a
black steel snap. There are attachment points front and back
for adding leg ties (not incl.) etc.
It's cemented at the spacer and hand stitched
using doubled waxed nylon saddle stitching thread making for an
extremely rugged, rough use sheath.
The rough beveled blade is reheated in the forge to glowing red
and quenched in strained used motor oil. After it's cleaned of slag
it's brought back up in temp. until it can be struck with a file.
I leave the file marks showing. I like a handmade knife to look
handmade.
This is how I harden / tempor my blades. They hold an edge
extremely well.
incl. S/H in the U.S. (PAYPAL ONLY).
1st. "I'LL TAKE IT" to my email address mcswood@msn.com
takes it.
Thanks for looking,
Mike
Last edited:
