Sold-Hinderer Firetac - Stonewashed CPM20CV Spanto blade and Lockside. 2nd owner, it has been carried, used and disassembled. It still maintains the original edge, although I believe I have stropped it on 1 or 2 occasions. Drop shut action currently running on bearings, blade appears centered and lockup is tight. It comes with an RC Bladeworks OD Micarta scale, as well as the Hinderer black G10 scale. Overall it is in excellent used condition, and makes for a great EDC.
Hinderer Eklipse- Stonewashed S45VN Hollow ground Slicer blade, Stonewashed Bronze Lockside. Purchased new 2025 with the first Hollow ground blade drop, and has seen Very light carry and use. The blade still maintains an untouched sharp factory edge, appears centered, and the action is drop shut running on bearings. There are couple minor snails and very light wear on the bronze anodizing from typical handling/carry. Overall it is in excellent used condition. Reposted
Hinderer XM-18 3.5 non flipper, CPM20CV Stonewashed hollow ground slicer blade, and stonewashed Lockside. I believe I am the 2nd owner, the knife has been carried, used and sharpened. Blade appears centered, lockup is solid and the action is drop shut running on Teflon washers.
Comes with a Hinderer dark green/black g10 scale as well as the OEM coyote scale. Withdrawn
Tactile Archer- Darkwashed Ti scales, Magnacut blade. It has been carried, and flipped a bunch, but very little use if any on the blade on my part. I’ve never stropped nor sharpened the edge. I usually just fidgit with this and use my CRK for cutting. However if tilted in the right light you can see polishing marks at the edge, which you can see in the 3rd pic. I believe this was from Tactile’s final polish. I am the 2nd owner, purchased here as BNIP, which can be searched in the for sale section. There is some lightening of the dark wash starting on the high points of the feather texturing, from handling. The blade appears centered, lockup is solid, and action is drop shut. IIRC these are running on skiffs from the factory. Complete with pouch and COA. Reposted
Hinderer Eklipse- Stonewashed S45VN Hollow ground Slicer blade, Stonewashed Bronze Lockside. Purchased new 2025 with the first Hollow ground blade drop, and has seen Very light carry and use. The blade still maintains an untouched sharp factory edge, appears centered, and the action is drop shut running on bearings. There are couple minor snails and very light wear on the bronze anodizing from typical handling/carry. Overall it is in excellent used condition. Reposted
Hinderer XM-18 3.5 non flipper, CPM20CV Stonewashed hollow ground slicer blade, and stonewashed Lockside. I believe I am the 2nd owner, the knife has been carried, used and sharpened. Blade appears centered, lockup is solid and the action is drop shut running on Teflon washers.
Comes with a Hinderer dark green/black g10 scale as well as the OEM coyote scale. Withdrawn
Tactile Archer- Darkwashed Ti scales, Magnacut blade. It has been carried, and flipped a bunch, but very little use if any on the blade on my part. I’ve never stropped nor sharpened the edge. I usually just fidgit with this and use my CRK for cutting. However if tilted in the right light you can see polishing marks at the edge, which you can see in the 3rd pic. I believe this was from Tactile’s final polish. I am the 2nd owner, purchased here as BNIP, which can be searched in the for sale section. There is some lightening of the dark wash starting on the high points of the feather texturing, from handling. The blade appears centered, lockup is solid, and action is drop shut. IIRC these are running on skiffs from the factory. Complete with pouch and COA. Reposted
Last edited: