Show what you did with your EDC today.

We're gettin' there. Tis' the season... weather lady said it's gonna hit 90's by next weekend 😳
eeTDmH1.jpg
 
strategy9 said:
We actually were in a rough place last year, and wound up never covering it... Definitely worse than normal this time of year.
Click to expand...
Understand. We did not open ours in 20 or 21 so when we did open it last year, the water was clear but a lot of gunk, junk, snarf and smega floating. I told my wife if I slipped and fell in just cover me up. Now have an algae problem and are fighting chemistry again.
Hope you get it cleared up and in use soon
 
One of our CNC machine's Usb wifi signal was being disrupted by the CNC machines outer chassis
So extended the wifi device out side with a USB extension cable

dXT3LNI.jpg


Then made a Stand for the wifi by splitting a piece of wood by Battening with a knife and battened 2 smalle wedges
Zip tied the wedges in between the 2 larger pieces of wood and taped together with strong silver tape (can't tear. has to be cut) to form the stand

Then use the silver tape to tape the stand in place on the CNC machines roof to keep it pointed directly to the wireless access point
 
Had a sudden craving for Nachos Bell Grande. Also got a drink. Wanted to refill the cup before I left. Taco Bell does not want you to refill your cup, even though they have a dispenser for refills. Saw another customer break her cup trying to get the lid off. Made a mess. It was hard to pry the lid off because the point kept going through the plastic. Knife was too sharp. :-)

Taco Bell drink.jpg
 
For the curious, I own an auto repair shop and wanted to remove a set of worn out 42 indh super swampers from the wheels. My tire machine wont do more than 38s because of clearance issues. I cut the tires down to fit on the machine. In this case i started with the knife and finished the set with a sawzall blade i modified for the purpose.







20230602_143850.jpg
 
Last edited:
Bitter sweet today, last game of my son's Spring regular season. Winner of today's game takes 2nd place, (they're currently tied in record, GF adv. to the other team, and they tied each other 2-2 earlier in the season). with a chance still at 1st if the current first place team loses today, or ties today and loses next weekend in their make up game.
2tzB75P.jpg

(Had to pull out the truck knife to cut a piece of cardboard to put between the ice & drinks, and the snack bags on top to keep them dry.
 
A big tree limb fell out of a tree in the front yard, but it was still attached, propped up on the ground at one end and held on by a sliver of bark and splinters at the other, so I lopped it off.

I suspect the limb had cracked significantly during the last ice storm, but not enough to notice till spring/summer leaves weighed it down and a little breeze wiggled it loose. The Ryobi pole saw made short work of that connection. Then I knocked off the smaller limbs with the Kershaw Camp 10. Much to my satisfaction, the Camp 10 whizzed through them like an ax. Or a hatchet. Or a really big knife sharpened like an ax...

(No, this little stack was not severed by the Kershaw, but whizzed into wee bits with the Ryobi for the neighbor who asked for them...)
 
You must log in or register to reply here.
Back
Top