"Slipjoint Swap Meet" (Read Rules In Post #1)

Status
Not open for further replies.
sunnyd said:
Vince,

I appoligize for the confusion.

Best,
Anthony
Click to expand...
Sunny,No need for additional or any apologies,confusion is confusion,lol-
The Crandall,is still available for trade,and is also listed for sale,as well as others,in a "topic",in another forum,Thank You,
Vince
 
Up for trade is this 6.5 Bonestag stockman which is unused, never sharpened, never carried and 3 1/2 inches closed in stainless steel.. email Anthony at veritas_group@bellsouth.net if this one gives you that warm & fuzzy.

000_1065.jpg
 
Still have some "new" unused Klaas knives (made in the 1950`s) and 2 sets of "new" unused Brückmann knives (made before or whilst WW2) for trade.
You may have a look at post # 97 and at the following one, please:
1024_3638353030323862.jpg


The one set of Brückmann knives contains the opened knife at the very left(wooden scales and stainless blades), the opened knife on top (horn scales and carbon steel blades) and the opened knife at the bottom of the pic (horn scales and stainless blades).
The 2nd set contains one stainless with wooden scales and one stainless with horn scales, only. Sorry, no pic yet.
(All the other Brückmann knives belong to my collection and will stay there! :p :D )

I`m interested in Brückmann knives and other german knives made before WW2 and in very good conditions. Also interested in handmade slipjoints and friction folders. (May add some cash, possibly.)

Thank you very much for looking.
 
Hello Wolfgang. I am interested in the first set of knives you described. Unfortunately, I do not have any knives to trade in the categories you mention. If you would like to sell them, please send me a personal message. Thank-you
 
If anyone has a senator pattern they'd like to trade off, please drop me a line.

regards,

Jeremy
 
Vivi said:
I don't know if this fits here, but I have a Spyderco knife I'd like to trade for something more traditional. D'allara Drop point, photos and impressions in the review forum.

I'd like a nice slipjoint, will always take some 110's, a Queen D2 slippie or a Mountain Man lockback would be lovely.
Click to expand...

Any interest in a carbon steel Boker Trapper like this? VERY little use, just some sharpening to re-profile the factory edge into something more useable. Still has no patina or staining.

If not - anyone else? I'd be interested in trading this Boker for a carbon stockman about 3.5" with rounded bolsters. Would consider a whittler too.
 
How about some Candy Stripe's for your ailments..:)

I have the following 3 up for consideration:

TradedSchatt & Morgan SFO 1 of 30 Candy Stripe Celluloid 1 Blade Texas Toothpick with Genuine Mother Of Pearl Keystone Shield. This is a Sooner State Knife Special Factory Order. This knife is "Mint" in the box never used or sharpened. This knife is especially nice looking with no visible marks or scratches...


Traded Queen Classic #19 4" trapper is 100% (NIB), with outstanding matching candy stripe scales. It comes with the Classic blade etch & crest shield & PD-D2 steel blades. As all Classic's, This was a low run of only 9 knives. This knife comes new in the box with limited quantity certificate (a little piece of paper stating steel,design, handle material, quantity and production date, no big thing). This knife is beautiful and almost flawless but it does have one flaw, on the top of the spear blade right above the Classic etching it has some spotting on one side only. Other than that it's in fantastic condition.


Boker Candy Stripe handled trapper Knife. The Knife Is 4 1/8 Inches Long Closed. The Knife Has Nickel Silver Bolsters And Brass Liners. The Boker Item # Is 2525 CS. The Knife Was Made In Solingen Germany. The Knife Has Never Been Used, Carried Or Sharpened.

All trades will be considered...Thanks

Sunburst

SMCandyStripeToothpick1of30.jpg

QueenClassicCandyStripeTrapper1of9J.jpg

BokerCandyStripeTrapper.jpg
 
Wolfgang said:
Still have some "new" unused Klaas knives (made in the 1950`s) and 2 sets of "new" unused Brückmann knives (made before or whilst WW2) for trade.
You may have a look at post # 97 and at the following one, please:
1024_3638353030323862.jpg


The one set of Brückmann knives contains the opened knife at the very left(wooden scales and stainless blades), the opened knife on top (horn scales and carbon steel blades) and the opened knife at the bottom of the pic (horn scales and stainless blades).
The 2nd set contains one stainless with wooden scales and one stainless with horn scales, only. Sorry, no pic yet.
(All the other Brückmann knives belong to my collection and will stay there! :p :D )

I`m interested in Brückmann knives and other german knives made before WW2 and in very good conditions. Also interested in handmade slipjoints and friction folders. (May add some cash, possibly.)

Thank you very much for looking.
Click to expand...


NO Klaas or Brückmann lovers around??? :confused: :D
 
Hi Gents, I have

(1) New-in-box D2 Queen Winterbottom Premium Trapper (#19) and
(1) New/uncarried Boker Congress (jigged red bone, stepped bolsters, carbon steel) that no longer has it's box (but I'll ship in a "sack-ups" knife sleeve).
and...
(1) nice like-new but "aged" Queen Folding Hunter w/ Winterbottom Handles / D2 Blades (#39). I have a picture of this one here (big one in center): http://www.thehighroad.org/attachment.php?attachmentid=49283&d=1166065861
I just used some cold blue & flitz to tone down the blade shine a bit - otherwise this one is as-new (not carried/never cut a thing).

I'm looking for another nice carbon steel Remington green/yellow derlin Waterfowl folder (R2 pattern - preferred, but an R1 would work - and I'd also be interested in a carbon Upland patter Remmy)...maybe others. I am also fond of older carbon/bone Canoes & Railsplitters.

Thanks in advance.
 
Hello everyone
I just found this thread. Would like to trade for IXL. older case moose.pre war Remington. and
older queen knives. I have lots of slip joints to trade for these. from.
pre ww2 till the late 60's. let me know what you have. IXL's take priority
thanks:)
 
Hey Gentleman, I have one of those delrin handle Moore Maker sodbusters, the big one, 4 1/2 inches, 1095 steel and a leather sheath. Never used. I would trade that sucker for a nice older barlow in good shape. Let me know what you got.
 
Thomason,Offer sent,on the sodbuster,Thanks,
Vince
 
I have a Case 3254 CV trapper in Red Bone that I carried for a week. Bought it in Sept of 2006. Very little use, if any... can't really remember. Looking for any Med. Stockman, Canoe, Sunfish in carbon steel. I'm really up for anything and would also be willing to add a little cash to make-up any difference in value.

email me at sierra11b @ gmail.com (no spaces)
 
Hi,
becoming somewhat obsessed over the "whittler" pattern of slipjoints...

I'd like to swap this Aaron Fredericks for an equivalent value of production slipjoint whittlers...
Vintage? Modern? Custom?
also somewhat fond of the serpentine and texas jack patterns, as well as the peanut...
e-mail me with offers...
billbrown6@cox.net


Sorry don't know the name of this folder, it's been a safe queen since I got it.
Titanium, Carbon fiber, framelock

fred1.JPG

fred2.JPG

fred5.JPG
 
Status
Not open for further replies.
Back
Top