Nathan the Machinist
KnifeMaker / Machinist / Evil Genius
Moderator
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 13, 2007
- Messages
- 15,742
This is the new Breaching tool pattern designed by and for firemen to open holes in things.
Please limit one per order.
6" Blade, .350" thick, Delta CPM 3V, HRC 60.5, sharpened 45 degrees on one side
12 3/16" total length
1 pound, 9 oz
Total lateral strength (cantilevered one side unsupported lateral strength) 1,500 lbs (provides 6:1 safety margin for a 250 pound load)
Can be used as a cold chisel, used with a "cheater bar" and also hammered upon.
Includes a nice kydex sheath.
$500, shipped
Please limit one per order.
6" Blade, .350" thick, Delta CPM 3V, HRC 60.5, sharpened 45 degrees on one side
12 3/16" total length
1 pound, 9 oz
Total lateral strength (cantilevered one side unsupported lateral strength) 1,500 lbs (provides 6:1 safety margin for a 250 pound load)
Can be used as a cold chisel, used with a "cheater bar" and also hammered upon.
Includes a nice kydex sheath.
$500, shipped