Zack Perlow Project Mayhem #05
Hi All,
Up for grabs is Zack Perlow PM #05. Made in 09/25, this guy has the following:
\- 50.50 forge mountain mai blade
\- marble cf / ironwood layered scaled
\- Zirc clip, collars, backspacer with oil slick
\- black lip pivot
Blade length is approx 3.5” plunge to tip, about 4.125” tip to pivot. About 8.5” OAL.
This hasn’t been cut or carried with. Just thoroughly fondled by me. The only thing to disclose is the tiniest bit of lock stick likely due to the shim in the carbon blade. It’s not enough that it presents any resistance, but you can hear it sometimes when closing (which I tried to show in the video).
Knife is centered and a pretty solid drop shut due to the weight of the blade. You can tune this of course with the pivot. All deploy methods work wonderfully and the knife is incredibly beautiful.
Asking table at $1600
Pics/vid/timestamp:
Hi All,
Up for grabs is Zack Perlow PM #05. Made in 09/25, this guy has the following:
\- 50.50 forge mountain mai blade
\- marble cf / ironwood layered scaled
\- Zirc clip, collars, backspacer with oil slick
\- black lip pivot
Blade length is approx 3.5” plunge to tip, about 4.125” tip to pivot. About 8.5” OAL.
This hasn’t been cut or carried with. Just thoroughly fondled by me. The only thing to disclose is the tiniest bit of lock stick likely due to the shim in the carbon blade. It’s not enough that it presents any resistance, but you can hear it sometimes when closing (which I tried to show in the video).
Knife is centered and a pretty solid drop shut due to the weight of the blade. You can tune this of course with the pivot. All deploy methods work wonderfully and the knife is incredibly beautiful.
Asking table at $1600
Pics/vid/timestamp: