• The rules for The Exchange can be found here. Please read and follow them. Stop using Paypal Friends & Family and follow our best practices to prevent getting ripped off or having a bad deal.

<SPF>52100 hunter slicer in ironwood

John Cahoon

JWC Custom Knives
Knifemaker / Craftsman / Service Provider
Feedback: 51 / 0 / 0
Joined
Apr 13, 2017
Messages
1,878
Hi everyone, Here’s another popular hunter slicer style offered up for your consideration. It is ready for a variety of tasks in the field.

Steel 5/32” 52100 professional HT 60/61 hand sanded to 2000 grit for a highly reflective satin finish.

Edge before sharpening was .012” or so and the blade glides through phone book paper, leather, rope etc. Pins and tube are stainless steel and it balances at the first pin. Angles are rounded where they need to be.

There are a couple of heat treat “divots”, near the tip on the left side and down by the start of the belly on the right side, as shown in the pictures. No charge for the added character!

Dimensions: 9 7/8” OAL, Tip to Scales 5 1/2” Width 1 ½”.

Ironwood scales sanded to 1200 grit. Scales are finished with Danish oil and carnauba wax. It feels great in my average sized hands. Lined and dyed sheath, molded at the ricasso for a very snug fit. It will come with a fluorescent orange paracord lanyard.

Asking only SOLD $160 via paypal, check or MO. Your satisfaction is my only priority. Feel free to comment, ask any questions or request more pictures. Thanks for looking!
19-6 1.JPG 19-6 2.JPG 19-6 3.JPG 19-6 4.JPG 19-6 5.JPG 19-6 6.JPG 19-6 7.JPG
 
Last edited:
Hello, this one is spoken for. thanks a ton Knifeknut!
 
Back
Top