I am open to fixed and folders alike. Please PM or email me your offer. Low feedback members will be expected to mail your end first.
Spyderco PM2
BNIB - Spyderco Paramilitary 2, s30v steel and black G10
Strider Ranger Green SMF
in s30v steel.
Emerson CQC7
Just received it. Built like a tank. Brand new in box unused, never cut with. Never carried.
Benchmade Contego Fixed Blade
S30V steel, BNIB
Daniel Rohde / RohdeEdge Hunter
Dimensions:
Overall Weight: 7.15
BLADE
Steel: AEB-L
Hardness: 61HRC
Overall Length: 8 3/4"
Blade Length**: 4"
Width: 5/8"
Spine Thickness: .105"
¼ Back from the Edge: .047"
Edge Thickness: .010"
Finish: 400 grit hand sanded
Grind: flat
Spine is smooth and rounded, Comes with a Smiths 325 grit Edge
HANDLE:
Finish: mirror polished Buffed
Material: Hunter Orange G10 with White G10 liners
Pins: 3/8" stainless loveless bolts
SHEATH:
.093" Black Kydex with black eyelets
The sheath has a nice click in fitt and is easy to draw
-The Eyelets in this sheath are spaced to fit the large Tek-lok belt loop(1 1/2" between center)
-Edges are buffed
-Comes with a Tek-lok belt loop/clip
*Blade Length is measured from the point to the start of the handle scales
**Width is measured at the ricasso
Bradford Guardian 4
s30v steel, slight discoloration to scales from previous owners handling. Unused otherwise. Comes with box.
Southern Grind Bad Monkey
BNIB, comes with tool bit kit.
Southern Grind Spider Monkey
s35vn steel, BNIB
Strider SA-L
Brand new and unused. CPM-s30v steel.
Buck 119 Cherrywood
Blue titanium hardware for ZT 0620 and ZT 0630
Everything shown is included. Brand new and never mounted.
Leodis Leather Sheath for Spyderco Manix 2
Had a knife in it for a few days awhile back but never carried it on my belt.
Hinderer XM-18 3.5 Blue Hardware
Standoffs
Pivot Screw
Scale Screws
(Clip and tab shown in photo are no longer available)
Never Mounted
Spyderco PM2
BNIB - Spyderco Paramilitary 2, s30v steel and black G10
Strider Ranger Green SMF
in s30v steel.
Emerson CQC7
Just received it. Built like a tank. Brand new in box unused, never cut with. Never carried.
Benchmade Contego Fixed Blade
S30V steel, BNIB
Daniel Rohde / RohdeEdge Hunter
Dimensions:
Overall Weight: 7.15
BLADE
Steel: AEB-L
Hardness: 61HRC
Overall Length: 8 3/4"
Blade Length**: 4"
Width: 5/8"
Spine Thickness: .105"
¼ Back from the Edge: .047"
Edge Thickness: .010"
Finish: 400 grit hand sanded
Grind: flat
Spine is smooth and rounded, Comes with a Smiths 325 grit Edge
HANDLE:
Finish: mirror polished Buffed
Material: Hunter Orange G10 with White G10 liners
Pins: 3/8" stainless loveless bolts
SHEATH:
.093" Black Kydex with black eyelets
The sheath has a nice click in fitt and is easy to draw
-The Eyelets in this sheath are spaced to fit the large Tek-lok belt loop(1 1/2" between center)
-Edges are buffed
-Comes with a Tek-lok belt loop/clip
*Blade Length is measured from the point to the start of the handle scales
**Width is measured at the ricasso
Bradford Guardian 4
s30v steel, slight discoloration to scales from previous owners handling. Unused otherwise. Comes with box.
Southern Grind Bad Monkey
BNIB, comes with tool bit kit.
Southern Grind Spider Monkey
s35vn steel, BNIB
Strider SA-L
Brand new and unused. CPM-s30v steel.
Buck 119 Cherrywood
Blue titanium hardware for ZT 0620 and ZT 0630
Everything shown is included. Brand new and never mounted.
Leodis Leather Sheath for Spyderco Manix 2
Had a knife in it for a few days awhile back but never carried it on my belt.
Hinderer XM-18 3.5 Blue Hardware
Standoffs
Pivot Screw
Scale Screws
(Clip and tab shown in photo are no longer available)
Never Mounted
Last edited:
