The Sunday Picture Show (November 7, 2021)

DeSotoSky said:
Both mbkr mbkr and Arian29 Arian29 show 300's with brass bolsters today. Were they common?
Click to expand...
As far as I can recall brass was only used with the Dymondwood Rosewood. They're pretty common. Buck still lists the 301 and 303 as current production on the website. The 301 is out of stock, but the brass/rosewood 303 is available today deal.gif

I also have a brass/rosewood 302
302Rosewood2.JPG302Rosewood3.JPG
 
Thank you Rodger. This is a loss prevention, push pin lanyard set up. I usually remove the lanyard when using the knife. The BuckLite handle has had a #5X40TPI cap screw added to the pivot along with the mating Helicoil. The BuckCote, Ion Fusion blade is chisel sharpened and coated with Titanium Nitride at 82 HRC. The hard coat is exposed on the micro edge. The blade steel wears aways in preference to the coat, so the knife is self sharpening.View attachment 1676440View attachment 1676441
 
Last edited:
pjsjr said:
DeSotoSky DeSotoSky Roger, I like to think I look at the whole...but...
I'm trying to fabricate scales for my 112 take a part, so maybe that has influenced how I see knives lately.
Click to expand...
What are you making them out of?

Here are some I did or have started for the 110.
AM-JKLXm0hk-d8oWuM7LiGgB3Oi-EsVDeCunHXbHWGl7MVfYtAI2nHIhxa-lIkoheONmQHcVedvNxAQa8WHDuLuvXckhMNcRt_8WNh0FkikMIcz3EO28DaiTVzvhCKvsc4wBuU4xqvYgSYipHuAF7yxqO8Rs=w1024


AM-JKLUKrEydc3eHrnLJW2At6zZVSgAssyQQHIIKx0gWELDArcQ05fJsv7-fRTI-zgSj1EHp2ce_rB9AM-09PQ9SlEZGy1DDC3G6KeD7nVp7mGdya3kMaAC6mGt-_lNQb0V0FdcsEYpiTO4gGP5XnnxIC2CU=w1024

AM-JKLWRI47YO_KVr46dHG7LfibbjAxTPv_zlHvea1AxSBlnaE-sKu8THQLKnhilbV4b2mbUGDGIkgjQo9aDiPffs5ZURFxkrZnUHgO0CxOJAV2ySdFO0tHUvbu5eLqxoE2aTZZwWuOjREbMwrNduPFA7K0C=w1024


There not perfect. I need to redo these black walnut ones some time. I messed up on the drilling.

O.B.
 
Great show everyone! I've got a super unique (assuming)one of a kind Brook trout pattern 175, and one with a bow and brownie! Got the super rare one from Craig(Dogpound77), not DAWGPOUND(Go Browns!). One of my favorites in my collection since I love to catch and eat Brook trout.......Everyone have a safe and enjoyable Sunday!!!

GQv9n93.jpg

ucYPLq4.jpg

NARo1ce.jpg

lxr4sss.jpg

iAdrWDS.jpg

1dA0HJ9.jpg

wfv1yKX.jpg


And a nice Cutty my wife caught in WY this past summer!!
3TseVfQ.jpg


Buck neck knife!
Cl4VEkC.jpg


USA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! JULY IN WY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

8ksxTQi.jpg
 
Hey all, Great show!

Something a little different from me today. This is some silver cut outs I’m having for a custom 110 I sent off. As myself & wife plus baby bump are moving across the pond to the USA, I thought it would be very fitting to have a knife handle designed with the state i will be residing in.

Thanks

0CBF2EDF-15C0-40B2-902E-880DA227DE58.jpeg
 
Skelator88 said:
Hey all, Great show!

Something a little different from me today. This is some silver cut outs I’m having for a custom 110 I sent off. As myself & wife plus baby bump are moving across the pond to the USA, I thought it would be very fitting to have a knife handle designed with the state i will be residing in.

Thanks

View attachment 1676645
Click to expand...
congrats on the upcoming kid and welcome to the states.
 
Skelator88 said:
Hey all, Great show!

Something a little different from me today. This is some silver cut outs I’m having for a custom 110 I sent off. As myself & wife plus baby bump are moving across the pond to the USA, I thought it would be very fitting to have a knife handle designed with the state i will be residing in.

Thanks

View attachment 1676645
Click to expand...
Congradulations on the little one! My youngest Son's wife is due on 11/8/21, I can't wait to meet our new family member.

Hope your move to Texas goes smooth for you and your wife. What part of Texas are you moving too?

Here is one for Texas


 
You must log in or register to reply here.
Back
Top