Tighe, CRK, Wilkins, Davis, SYCKO, and Ferrum Forge

ooitzoo

ooitzoo

Gold Member
Feedback: +377 / =0 / -0
Joined
Oct 2, 2010
Messages
8,205
LNIB Brian Tighe Tighe Stick in BG 42 - Just got this back from Brian. He blasted the body and replaced the lock bar. This knife is over 12 years old (confirmed by the man himself.) The lock up is perfection and the knife functions perfectly. The handle design is amazingly comfortable (I have mid sized hands.) The blade design and grind are unbelieveable. Putting some feelers out here. I do not expect to let this one go easily.
http://i.imgur.com/9DHMpdm.jpg
http://i.imgur.com/RCE9NR7.jpg
http://i.imgur.com/xLvaB6b.jpg
http://i.imgur.com/FJClfO5.jpg

Lightly used Alan Davis All Ti Folder (with Pivot tool) - The entire knife is made of blue anodized Ti. The blade is carbidized on one side and sharpened on the other. It is hollow V ground. The action is pretty smooth considering the knife squeeked when I purchased it. Its gotten quite smooth with use though there is a bit grittyness if one were to press the blade hard into the lock side while opening. The lock up is perfection. Centering is spot on and the detent is perfect. The knife runs on Alan's proprietary bearing system and flicks open with ease.
http://imgur.com/KCoCixB.jpg
http://imgur.com/2nZonf0.jpg
http://imgur.com/jTZlxyW.jpg
http://imgur.com/w7s91CA.jpg

Wilkins Full Size Griptillian in Tan / Black G10 w/D2 Blade - This is a D2 black coated Large Griptillian. It has seen use and has been sharpened. The scales are relatively new but also seen pocket time. The G10 is "layered". That is, they alternate Tan and Black for a really cool effect. I no longer have the original scales. Knife functions perfectly and the scales are quite cool. Recently got my hands on a Wilkins mini grip and that is more my speed.
http://i.imgur.com/MBrAw1v.jpg
http://i.imgur.com/6ikvtNr.jpg
http://i.imgur.com/WwAt2zv.jpg

A set of two Ferrum Forge Ti Dashi's
http://i.imgur.com/d2Ra3u4.jpg
http://i.imgur.com/xmyXyyS.jpg


Specifically, interested in the following:
* Strider SnG CC or DGG (would prefer a CC over a DGG)
* On a Silver Twill CF / G10 kick lately
* Warren Thomas Ti Folders
* Jens Anso
* CRK Folders (Sebenza, Mnandi, Zaan, Ti Lock)
* William Henry
* Silver (not scrap --ideally ASE's)
* Smooth CF Scale for Hinderer XM-18 Gen 4 3.5"
* Three Sisters Forge Beast / Super Beast
* Wilson Eagle Flipper
* Custom Folders
* Spyderco Military in Ti
* Spyderco CF Caly 3.5
* Cuscadi Full Grip Scales
* Ti Wilkins Full Grip Scales
* Microtech Socom Delta / Elite (preferably with CF in lays or Zombie edition)

Feel free to make an offer. The worst that happens is we don't work something out.

Email me at mpolyak83[at]yahoo[dot]com ***THIS IS BY FAR THE BEST WAY TO REACH ME***
 
Last edited:
ZT 0560 CBCF - The knife has seen carry and use though its hard to tell just by looking at it. The edge looks factory to me. The CF is beautiful with no noticeable wear. The blade is clear and the inside of the knife looks clean as well. The knife functions flawlessly though it is worth mentioning that I did tighten the pivot when I got it. This rubbed some of the coating off of the pivot screw. To be clear, the screw is NOT stripped but some of the coating did come off. I am certain that ZT will just send you a new pivot screw if you ask.
http://i.imgur.com/txxBdLh.jpg
http://i.imgur.com/bvBQJyO.jpg?1
http://i.imgur.com/MkMVrYS.jpg
http://i.imgur.com/CaRd6RE.jpg?1
Click to expand...

This is gone!!
 
You must log in or register to reply here.
Back
Top