Traded to Tjc591!

Sorry for the delay. haven't been around a computer.
Darrex, I have no interest in a Dyad at this time. Thank you.
Autotac92 - I'm very interested, please email me.

All others are replied.
 
I do NOT have any pics at this time because I have no access to my camera. Sorry for any inconvenience.

Onto the thread...
I have:
Trade Pending to Tjc591!
ZT 0801 - Lightly used - a couple of faint marks on ti that you really have to look for - no scratches on blade - carry marks on the pocket clip - Solid lock up, no blade play, and centered blade. I did bend out the clip a tiny bit at work but bent it back and it's perfect. - I put loc-tite on the pivot because the screw would back out after a while. You will have to loosen the loc-tite or have a torx on each side to loosen it and get the screw out. It stays solid this way and no worries about it backing out, it won't come out unless you really make it. - Touched up the blade lightly on the stones and it is nice and sharp. - Comes with box and papers.

Nothing major is wrong with the knife, actually nothing is wrong with it at all.
At a first look you would think it's perfect.
The "marks" on the ti are so light you have to have it in good light to see anything at all, no one would even notice them unless they take a good few minutes to look for them.
The blade was barely touched up but the blade had a little tape on the blade from work, so I cleaned all that up, and touched the edge up, and it's good as new.
 
Last edited:
You must log in or register to reply here.
Back
Top