- Joined
- Oct 5, 2006
- Messages
- 937
"Twisted Cripple EDC's (Everyday Carry Knives for the Workin' Man)
ONLY ONE MORE LEFT FROM THIS BATCH AS OF 1:03PM SUNDAY, NOV 15TH.
To see the video "Grinding The Twisted Cripple EDC" - click here
Every Day Carry Neckers priced right for the working man, for early holiday shopping, or for any reason you can come up with because you want a new knife. This piece is a collaboration with my apprentice, CJ Powell, as we wanted to come up with something that would be affordable yet still the quality of all my other pieces. The run is limited to a maximum of 100 pieces, 15 at a time. Each knife is numbered on one side, with JK for Jarrett Knives on the other.
They are all individually made, not cut out by water jet or CNC. All work was done in house by hand in my shop including heat treating.
* Perfect for working around the house *
* Sized right for any task, at home or in the woods *
* Wear it under your fishing or bird hunting vest *
* The Micarta was left "Grippy" for control even when wet with water or blood *
* Neck knives are useful on the job where repeated use or quick access is needed *
* Light enough for comfort, heavy enough to not swing around and bother you *
* Easy to clean and care for *
* O1 Tool Steel holds an edge forever, but is easy to resharpen if necessary *
A quality package - Only $125 Shipped USPS Priority Mail in The Continental U.S.
SPECS
OAL: Average 6 +/- .0625 (1/16")
Blade: 2 1/2 Flat Grind x 9/64 thick
Blade Steel: Aldo's O1 Tool steel in satin finish; triple tempered
File Work: N/A
Handle: Black Linen Micarta left a little grippy
Bolsters: N/A
Pins: 1/8 416 Stainless Steel pin and thong tubing
Sheath: : Concealex/Kydex; Black, with 27 Black Paracord lanyard and either a glow in the dark or whistle cord end closure. There is a mix so specify which you prefer and Ill fill orders until one or the other run out. The sheaths are finished so if you want a specific number, i.e. the lowest available number in the run, then you will get whichever cord end is on that sheath.
My choice of O1 tool steel rather than stainless for a quality EDC is for edge retention which to me is wear resistance, ease of sharpening in the field and edge stability combined. These EDCs are laser sharp that I guarantee. So much so that they may come with a tiny bit of arm hair left on them .just kidding.
$125 ; includes USPS Priority Shipping in the continental U.S. while they last. Just reply here in the listing with Ill take one and we can work out the specifics.
International sales are very welcome but they must pay the exact shipping costs.
Paypal: paypal@jarrettknives.com
ONLY ONE MORE LEFT FROM THIS BATCH AS OF 1:03PM SUNDAY, NOV 15TH.
To see the video "Grinding The Twisted Cripple EDC" - click here
Every Day Carry Neckers priced right for the working man, for early holiday shopping, or for any reason you can come up with because you want a new knife. This piece is a collaboration with my apprentice, CJ Powell, as we wanted to come up with something that would be affordable yet still the quality of all my other pieces. The run is limited to a maximum of 100 pieces, 15 at a time. Each knife is numbered on one side, with JK for Jarrett Knives on the other.
They are all individually made, not cut out by water jet or CNC. All work was done in house by hand in my shop including heat treating.
* Perfect for working around the house *
* Sized right for any task, at home or in the woods *
* Wear it under your fishing or bird hunting vest *
* The Micarta was left "Grippy" for control even when wet with water or blood *
* Neck knives are useful on the job where repeated use or quick access is needed *
* Light enough for comfort, heavy enough to not swing around and bother you *
* Easy to clean and care for *
* O1 Tool Steel holds an edge forever, but is easy to resharpen if necessary *
A quality package - Only $125 Shipped USPS Priority Mail in The Continental U.S.
SPECS
OAL: Average 6 +/- .0625 (1/16")
Blade: 2 1/2 Flat Grind x 9/64 thick
Blade Steel: Aldo's O1 Tool steel in satin finish; triple tempered
File Work: N/A
Handle: Black Linen Micarta left a little grippy
Bolsters: N/A
Pins: 1/8 416 Stainless Steel pin and thong tubing
Sheath: : Concealex/Kydex; Black, with 27 Black Paracord lanyard and either a glow in the dark or whistle cord end closure. There is a mix so specify which you prefer and Ill fill orders until one or the other run out. The sheaths are finished so if you want a specific number, i.e. the lowest available number in the run, then you will get whichever cord end is on that sheath.
My choice of O1 tool steel rather than stainless for a quality EDC is for edge retention which to me is wear resistance, ease of sharpening in the field and edge stability combined. These EDCs are laser sharp that I guarantee. So much so that they may come with a tiny bit of arm hair left on them .just kidding.
$125 ; includes USPS Priority Shipping in the continental U.S. while they last. Just reply here in the listing with Ill take one and we can work out the specifics.
International sales are very welcome but they must pay the exact shipping costs.
Paypal: paypal@jarrettknives.com
Last edited:
those look great Wayne... nice work man..:thumbup: i wish i had the extra $$$..
