Pee Dee Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Jun 24, 2017
- Messages
- 864
Two pocketable fixed blades in A2 looking for new homes.
These are from the first batch of blades that I heat treated in house (garage). The heat treat was a 1750F austnitize, plate quench, liquid nitrogen cryo for an hour, and double temper at 400F for 1.5hrs per cycle. The end result is these are running at 64HRC and should be absolute performers.
I do a better job describing the blades in the videos, so I recommend giving them a watch.
Moultrie Harpoon Mk.1: 3.25” blade, 7.25” OAL. Curly maple scales, dyed with TransTint Honey Amber dye and aluminum pins with stainless lanyard tube. 1/8” A2 tool steel at 64HRC. Black kydex sheath with black rivets.
$125, shipping included SOLD
drive.google.com
Lil’ Pee Dee Harpoon Mk.2: 2.75” blade, 6.25” OAL. Desert ironwood scales with brass pins. 1/8” A2 tool steel at 64HRC. Black kydex sheath with brass rivets.
$200, shipping included SOLD
drive.google.com
I stand behind all of my work. If you have a problem with one of my blades, reach out and I will make things right.
These are from the first batch of blades that I heat treated in house (garage). The heat treat was a 1750F austnitize, plate quench, liquid nitrogen cryo for an hour, and double temper at 400F for 1.5hrs per cycle. The end result is these are running at 64HRC and should be absolute performers.
I do a better job describing the blades in the videos, so I recommend giving them a watch.
Moultrie Harpoon Mk.1: 3.25” blade, 7.25” OAL. Curly maple scales, dyed with TransTint Honey Amber dye and aluminum pins with stainless lanyard tube. 1/8” A2 tool steel at 64HRC. Black kydex sheath with black rivets.
$125, shipping included SOLD
IMG_5747.MOV
drive.google.com
Lil’ Pee Dee Harpoon Mk.2: 2.75” blade, 6.25” OAL. Desert ironwood scales with brass pins. 1/8” A2 tool steel at 64HRC. Black kydex sheath with brass rivets.
$200, shipping included SOLD
IMG_5748.MOV
drive.google.com
I stand behind all of my work. If you have a problem with one of my blades, reach out and I will make things right.
Last edited:
