- Joined
- Sep 17, 2012
- Messages
- 13,402
I have for trade a user ZT 561 that has been modded by the previous owner.
He dropped the spine, added a choil, dyed the brown g10 to a dark red wine-ish color, and slightly flamed the stop pin.
He also sharpened it to a mirror finish on an Edge Pro ( I believe) which it still has though not quite as clear as before since it's been a user.
Still will shave a few hairs here and there, I haven't needed nor wanted to touch it up because I'd mar the mirror finish.
As previously stated this knife has been a user. The tip has been slightly nipped. I took a picture not sure if it will show. There are a few tiny dings on the spine north of the ZT logo, in the middle and close to the tip. I tried but they would show up in pictures. There is couple of little dings on the corners of the g10. The blade is not quite centered. It favors the lockside but does not rub the frame at all. There is up and down blade play. Enough to feel it with your hands and if you shake it while open there is a small audible click. However, even with the play the lockup is still strong. It has not disengaged once. Opens fast and smooth.Comes with the box and bubble wrap sleeve.
I am interested in but not limited to Emersons, Spydercos, Benchmades, maybe Mcusta, CRK as far as folders go.
Also interested in smaller fixed blades say less than 8 inches overall.
Can go one for one, multiples, could trade up and add cash/knife perhaps. We shall see. Thanks for looking.
Reply in the thread then PM or email your offer please.
That's the nipped tip. Kind of hard to tell but it is.
He dropped the spine, added a choil, dyed the brown g10 to a dark red wine-ish color, and slightly flamed the stop pin.
He also sharpened it to a mirror finish on an Edge Pro ( I believe) which it still has though not quite as clear as before since it's been a user.
Still will shave a few hairs here and there, I haven't needed nor wanted to touch it up because I'd mar the mirror finish.
As previously stated this knife has been a user. The tip has been slightly nipped. I took a picture not sure if it will show. There are a few tiny dings on the spine north of the ZT logo, in the middle and close to the tip. I tried but they would show up in pictures. There is couple of little dings on the corners of the g10. The blade is not quite centered. It favors the lockside but does not rub the frame at all. There is up and down blade play. Enough to feel it with your hands and if you shake it while open there is a small audible click. However, even with the play the lockup is still strong. It has not disengaged once. Opens fast and smooth.Comes with the box and bubble wrap sleeve.
I am interested in but not limited to Emersons, Spydercos, Benchmades, maybe Mcusta, CRK as far as folders go.
Also interested in smaller fixed blades say less than 8 inches overall.
Can go one for one, multiples, could trade up and add cash/knife perhaps. We shall see. Thanks for looking.
Reply in the thread then PM or email your offer please.
That's the nipped tip. Kind of hard to tell but it is.
Last edited:
