Consolidated Trade Offerings
Rick Hinderer Production XM-18 3.5" Skinner Blade w/Copper Colored Hardware - Lightly carried, flips like a Hinderer TRADED
ADV Production Butcher - TRADED - Big Boy of a knife, awesome flipper. Lightly carried. Some wear in the finish which should be visible in the pics. It has a slight flattening on a small section of the fuller grind in the same location on both sides which are hard to see and don't show up in the pics very well. I'm not the first owner so I don't know if its like that from ADV or if something was done to it after it left. I've marked in the last picture the location on the blade and it's slightly more pronounced on the side I took the close up of.
Kershaw Mini Cyclone in ZPD and Ti. TRADED - Sharpened/thinned out on EdgePro. It had a factory low spot before I started, which if you sharpen a lot of knives on a guided system you will see quite often in that same location by the riasco, and I didn't want to remove any more metal to fix it at that time. It will come out with a couple of sharpenings. The last pics should show it as much as possible.
The wetness is WD-40 and you can't look at the DLC without it smudging..
Strider Ranger Green Recurve SMF, sharpened/thinned edge and carried, good lockup, off center but not rubbing.
SwampRat Vex sharpened, Recurve Rd/Blk handle in a PPKS sheath with Teklok
Orange/Grn Knife/Sheath NOT FOR TRADE
Ontario RAT 7 in D2. Thinned out but never carried. Dusty from sitting on shelf but really sharp.
Brous Mini-Division Flipper in D2, Very Very Good condition. Only issue are 3 light dings in the G10 on the end of the handle slabs, 2 on one side one on the other. They are very small and blend in due to the color of the handle. Otherwise it locks up tight, blade is centered, and it flips very fast. TRADED
Swamp Rat Tan BattleGuard with Stock Sheath
Looks to be mint with some very light smoothing from the sheath. Just noticed how dusty the sheath is, I'll see if I can't get it blown out directly.
Busse Skinny ASH and SarSquatch Kydex Sheaths
Skinny ASH Sheath - Buy Brown
SarSquatch Sheath - Unknown maker. Fits but isn't top of the line..
Azwelke Red Swamp Rat Rodent 4 Kydex Sheath TekLok not included - fits pretty snug
Busse AD Kydex Sheath, unknown maker (Onscene Tactical?) - fits snug Was formed around a .20 Sabre ground AD.
Disclaimer: I reserve the right to refuse trade without explanation... You must be 18 years of age and the knife must be legal to own by you and in your municipality of residence. I ship USPS Priority Insured w/tracking. I'd also rather not lie on any Customs forms. PM me here or send me an email @ bladeforums//@//mckean\\dot\\com with any questions/comments/complaints.
The main trade items I'm looking for.. (Might be able to do cash up or down depending on when you catch me.)
NO COMBO OR SERRATED EDGES, AUTOs, BALIs
Strider CC SMF with SOLID lockup, Tantos Preferred
ZT 0392BWBRZ, 0630/CF, 0560BW
Busse Boss Street, NMSFNO or SFNO
Fehrman First Strike
Nicer G-Shocks and Seiko Chronos
Thanks,
Greg (bladeforums AT McKean DoT COM)
Rick Hinderer Production XM-18 3.5" Skinner Blade w/Copper Colored Hardware - Lightly carried, flips like a Hinderer TRADED
ADV Production Butcher - TRADED - Big Boy of a knife, awesome flipper. Lightly carried. Some wear in the finish which should be visible in the pics. It has a slight flattening on a small section of the fuller grind in the same location on both sides which are hard to see and don't show up in the pics very well. I'm not the first owner so I don't know if its like that from ADV or if something was done to it after it left. I've marked in the last picture the location on the blade and it's slightly more pronounced on the side I took the close up of.
Kershaw Mini Cyclone in ZPD and Ti. TRADED - Sharpened/thinned out on EdgePro. It had a factory low spot before I started, which if you sharpen a lot of knives on a guided system you will see quite often in that same location by the riasco, and I didn't want to remove any more metal to fix it at that time. It will come out with a couple of sharpenings. The last pics should show it as much as possible.
The wetness is WD-40 and you can't look at the DLC without it smudging..
Strider Ranger Green Recurve SMF, sharpened/thinned edge and carried, good lockup, off center but not rubbing.
SwampRat Vex sharpened, Recurve Rd/Blk handle in a PPKS sheath with Teklok
Orange/Grn Knife/Sheath NOT FOR TRADE
Ontario RAT 7 in D2. Thinned out but never carried. Dusty from sitting on shelf but really sharp.
Brous Mini-Division Flipper in D2, Very Very Good condition. Only issue are 3 light dings in the G10 on the end of the handle slabs, 2 on one side one on the other. They are very small and blend in due to the color of the handle. Otherwise it locks up tight, blade is centered, and it flips very fast. TRADED
Swamp Rat Tan BattleGuard with Stock Sheath
Looks to be mint with some very light smoothing from the sheath. Just noticed how dusty the sheath is, I'll see if I can't get it blown out directly.
Busse Skinny ASH and SarSquatch Kydex Sheaths
Skinny ASH Sheath - Buy Brown
SarSquatch Sheath - Unknown maker. Fits but isn't top of the line..
Azwelke Red Swamp Rat Rodent 4 Kydex Sheath TekLok not included - fits pretty snug
Busse AD Kydex Sheath, unknown maker (Onscene Tactical?) - fits snug Was formed around a .20 Sabre ground AD.
Disclaimer: I reserve the right to refuse trade without explanation... You must be 18 years of age and the knife must be legal to own by you and in your municipality of residence. I ship USPS Priority Insured w/tracking. I'd also rather not lie on any Customs forms. PM me here or send me an email @ bladeforums//@//mckean\\dot\\com with any questions/comments/complaints.
The main trade items I'm looking for.. (Might be able to do cash up or down depending on when you catch me.)
NO COMBO OR SERRATED EDGES, AUTOs, BALIs
Strider CC SMF with SOLID lockup, Tantos Preferred
ZT 0392BWBRZ, 0630/CF, 0560BW
Busse Boss Street, NMSFNO or SFNO
Fehrman First Strike
Nicer G-Shocks and Seiko Chronos
Thanks,
Greg (bladeforums AT McKean DoT COM)
Last edited:
