Got a few new knives up for trade today. Mostly Spyderco and one Benchmade.
Here's all of them.
And now the Spydies
First up is a Spyderco Native XHP. NIB, just doesn't get used over my 440V SE Natives so off to someone else he goes.
NATIVE IS GONE
Comes with box and papers.
Nothing much to say, lockup seems solid, a bit of side to side if you force it and a bit of up and down that most lockbacks have.
Michael Walker is TRADED
Next up is a Michael Walker Blue Almite. LNIB, I just received it intending it as a gentlemans EDC but it doesn't fit with my hand very well so putting it up for trade. The Al looks flawless and I couldn't find any scratches.
Lock-up.
Centering is fine.
Next up is a Lil Temp Rhino Horn in 440V, CC# of 18. LNIB as well, with two small dings in the G-10, and the 440V tang stamp is faded.
Comes with baggie and old school warranty sheet.
Lock-up is nice and early, solid and with no play.
#18.
As this and the last picture show, the 440V tang stamp isn't very bold.
Here's the first ding in the G-10, right above the circledot thing.
And the second one, to the left of the pivot. Besides those, the knife is NIB.
And the last Spyderco is a Rock Salt CC# 153. Unused but the box is beat up.
Comes with box, sheath, cardboard sheath, and paper thing.
If you care about the CC #, there it is. And if you don't it's pretty small and doesn't clutter up the blade very badly so hurray!
H1 Tang Stamps
Box has been through a lot though.
And last but not least is a Benchmade Mini-Rukus 615-1401. Limited Number 130/500 with S30V steel.
This is gone!
Box, plastic bag, microfiber bag, and warranty sheet.
Centering is great, might be off a slight bit to the right but no where near rubbing.
S30V, and #130/500 as mentioned.
And the other side of the blade.
Right now, my interests are pretty broad, I like Spyderco Sprints, Benchmades in non-S30V/154CM/D2/N680 steels (M2 is a steel I've been meaning to try!), would also bundle knives for a Strider in 3v, Z-Wear, PD-1, or S110V.
But I will consider all offers, email or PM will be the fastest way to reach me and I will respond as quickly as I can.
Now on to my disclaimers. I will ship with USPS insured either the day of or the day after we strike a deal, except on weekends, then I will ship out on the following Monday. By responding to this ad, you agree that you are over the age of 18 and can legally own the knife in question in your jurisdiction, I am not responsible for knowing or following the laws in your jurisdiction, that is on you. I have the right to halt and reverse any trade wherever it may be if I feel you are under the age of 18 (or for any other reason) and may require you to show ID if I have any concerns. Should this happen, I will return all knives received by me and recoup your shipping. No international sales unless you are willing to accept full responsibility after the knife is shipped. If you have any questions feel free to PM or email me.
Thanks for looking and have a great day!
Here's all of them.
And now the Spydies
First up is a Spyderco Native XHP. NIB, just doesn't get used over my 440V SE Natives so off to someone else he goes.
NATIVE IS GONE
Comes with box and papers.
Nothing much to say, lockup seems solid, a bit of side to side if you force it and a bit of up and down that most lockbacks have.
Michael Walker is TRADED
Next up is a Michael Walker Blue Almite. LNIB, I just received it intending it as a gentlemans EDC but it doesn't fit with my hand very well so putting it up for trade. The Al looks flawless and I couldn't find any scratches.
Lock-up.
Centering is fine.
Next up is a Lil Temp Rhino Horn in 440V, CC# of 18. LNIB as well, with two small dings in the G-10, and the 440V tang stamp is faded.
Comes with baggie and old school warranty sheet.
Lock-up is nice and early, solid and with no play.
#18.
As this and the last picture show, the 440V tang stamp isn't very bold.
Here's the first ding in the G-10, right above the circledot thing.
And the second one, to the left of the pivot. Besides those, the knife is NIB.
And the last Spyderco is a Rock Salt CC# 153. Unused but the box is beat up.
Comes with box, sheath, cardboard sheath, and paper thing.
If you care about the CC #, there it is. And if you don't it's pretty small and doesn't clutter up the blade very badly so hurray!
H1 Tang Stamps
Box has been through a lot though.
And last but not least is a Benchmade Mini-Rukus 615-1401. Limited Number 130/500 with S30V steel.
This is gone!
Box, plastic bag, microfiber bag, and warranty sheet.
Centering is great, might be off a slight bit to the right but no where near rubbing.
S30V, and #130/500 as mentioned.
And the other side of the blade.
Right now, my interests are pretty broad, I like Spyderco Sprints, Benchmades in non-S30V/154CM/D2/N680 steels (M2 is a steel I've been meaning to try!), would also bundle knives for a Strider in 3v, Z-Wear, PD-1, or S110V.
But I will consider all offers, email or PM will be the fastest way to reach me and I will respond as quickly as I can.
Now on to my disclaimers. I will ship with USPS insured either the day of or the day after we strike a deal, except on weekends, then I will ship out on the following Monday. By responding to this ad, you agree that you are over the age of 18 and can legally own the knife in question in your jurisdiction, I am not responsible for knowing or following the laws in your jurisdiction, that is on you. I have the right to halt and reverse any trade wherever it may be if I feel you are under the age of 18 (or for any other reason) and may require you to show ID if I have any concerns. Should this happen, I will return all knives received by me and recoup your shipping. No international sales unless you are willing to accept full responsibility after the knife is shipped. If you have any questions feel free to PM or email me.
Thanks for looking and have a great day!
Last edited:
