- Joined
- Jan 1, 2013
- Messages
- 777
Here's everything I have for trade:
Hinderer 3 inch xm 18, latest generation (Gen 3 for the 3"), flipper/ slicer grind, translucent green scale, I bought this LNIB "just flipped a few times" from the exchange and it did have a light scuff to one screw and a slight shiny spot on the edge, I think the screws cost around $12 and S&H to replace if you really want it perfect and new but it's never cut anything or been carried to my knowledge, I did splash coffee on the box...
*Traded2014 Traditional Forum knife, nicely figured narrow stag, unused but has some opening marks
Esee 3 Orange g10/ OD green blade, lightly used
Esee Avispa tan/satin, 2nd owner but bought 'NIB' and never used, very sharp, strong lockup
***TradedCold Steel mini recon 1 clip point, barely used, couple scuffs on coating
Kershaw cqc 5k, used and roughly sharpened
Kershaw s30v Blur, removed torsion bar, edge looks like it was roughly sharpened on diamond stones, many small chips, right thumb stud was sanded but I can't tell, small gouges in handles from disassemblyAl Mar Eagle, lightly used and carried, just had this professionally hand sharpened and it's unused since, the blade is better than new
Black G10 Grips by Kevin Wilkins for the large Benchmade Griptilian. There's a little scuff on the black aluminum backspacer but the g10 looks great/new to me. I just got these on the exchange and the feel great. http://wilkins-knives.com/wilkinsgrip-stocklist
Benchmade Rift, black g10, lightly used never sharpened, one light scratch on the blade
Benchmade 484 Nakamura, reground by Big Chris, cuts like a laser, awesome swedge
Benchmade Ritter Grip, amost LNIB, I set it down next to my Blur and knocked the edge slightly, there's just about a 1mm shiny spot
Benchmade Ritter Griptilian, used, black scales, s30v, this came with the Wilkins grips, (they've been separated) and it was reassembled by me. The clip is stripped. It has a polished edge. I think the blade was purposely rubbed with a light abrasive as the etchings are faded and there are light scratches in with the stonewash.
Benchmade 707, light use but the handle shows wear from a few drops
Spydercos:
***SoldDragonfly black frn vg10, sharpened out a small chip by the finger choil, no clip (I have knives with Spyderco for warranty, I may buy another clip)Ladybug Hawkbill, used and carried, lanyard hole has been stressed a little to accommodate a large key ring
***TradedBlack frn stretch, lightly used, sharpened
Super Blue Endura, lightly used, forced patina, I also had this professionally hand sharpened (Jason B, good work...)
***SoldBlack frn vg10 PE Endura, used, minor edge damageBlack DLC CE Endura, used and sharpened (wide bevel on PE portion)
***SoldMiniDyad Sprint, blue frn and vg10, bought new on the exchange, still unused, it has very slight damage to the tip, tiny and almost imperceptible, could have certainly left the factory this way ( you may not even notice but I see what looks like a spec of dust on the tip, under light)
***SoldMicrodyad mother of pearl, factory second (no box) with a botch mark on one bolster, plenty of scratches, blades in great shape
Micarta dyad jr, good condition, wear mostly to clip, very nice knife but I don't carry it, no box
***SoldJester grey G10 sprint, lightly used, sharpened
***GoneStacked wood Kopa, barely used, carried once, sharpened once, stacked wood handles slightly loose and could be glued but feel fine
***TradedSouthard, brown g10, used and sharpened, lanyard tube rattles
Gayle Bradley Folder, close to new condition with some scratches on the pocket clip, 'never cut anything' when I bought it, still hasn't
Brown frn XHP Native 3, bought on the exchange, very good condition, it's been sharpened, perfect lockup
***SOLDCaly 3.5 super blue sprint, I bought this one used with plenty of scratches, vertical blade play, a chip in the blade; I sent it in for resharpening and lost a little bit of steel from the edge (but it's even and I can finally sharpen it on a sharpmaker), some removed rust along the pivot area and some coloration left over
***TradedG10 Dragonfly, bought here on the exchange in very good condition, I haven't used it
***Traded S110v mule, New in unopened box
***TradedS110v mule with Halpern 3D natural micarta handles and a Kydex sheath w/ G-clip from SheathPro, barely used, storage marks on the sheath
***SoldChaparral, CF, XHP, barely used, needs to be sharpened as I started in at 30 degrees on a sharpmaker, didn't finish but nearly reprofiled
***SoldCruwear Military, lightly used and sharpened
***SoldSpyderco stainless kiwi lockback, old and discontinued but was preserved almost unused in someone else' collection, it looked carried only but I've used it lightly, no box
***SoldZero Tolerance CF0770, reprofiled and used, very sharp
***SoldBenchmade 710, very slight vertical lock rock, not enough to bother me it's just a bigger knife than I carry, lightly sharpened and used, very tip of blade is discolored
***SoldDPX H.E.S.T. 2.0, green G10 and black coated D2 blade, scratch in the blade coating, some faint wear in the coating, barely used never carried, scratch on the titanium, fun knife but I doubt I'll carry it
***SoldGEC 66 slim Calf roper in Gabon Ebony, 1095, California clip main blade, bought used on the exchange, very good condition
***SoldNorthwoods Norolk in ebony, lightly used with patina, started in sharpening at 30 degrees, haven't finished, it needs to be finished as it's not sharp right now
***SoldOld German Eye Moose, plain federal shield, "3 eye", light brown jigged bone, scratched bolsters have been sanded and left rough, need a little TLC, I bought this unused from a large collection, I have barely used it, perfect walk and talk
***SoldQueen Burke Stockman, Green Winterbottom Bone, (I believe it's bone but maybe Delrin), unusual jigging, very thin blades of Sandvik 12C27, it's in great condition, sanded bolsters as well, they look good
***Sold Winchester jigged bone wharncliffe swell center, black jigged bone shows lighter color on the edges, reddish, the pattern's almost identical to a Northwoods Norfolk, strong snap, main blade needs sharpening/ reprofiling, pen blade shows some wear
Case/ Bose Damascus Muskrat, 1 of 100 made, 154CM liners/bolsters and Devin Thomas Raindrop Damascus blades, Peach seed dark molasses jigged bone, unused but dropped twice resulting in small marks on the bolsters and backspring, these were removed/ repaired by Case leaving only small remnants of damage, looks great now. wharncliffe and California clip blades, each about 3 inches, would make an amazing user. info ----------> http://www.bladeforums.com/forums/s...-Damascus-Muskrat?highlight=case+bose+muskrat comes with suede pouch and box, the bone on mine is beautiful
If you're interested in a trade please send me a private message (the best option for me), email, or post here. I'll be back to check this thread periodically. I have basic photos of most of these knives,, upon request.
Thanks for looking.
Hinderer 3 inch xm 18, latest generation (Gen 3 for the 3"), flipper/ slicer grind, translucent green scale, I bought this LNIB "just flipped a few times" from the exchange and it did have a light scuff to one screw and a slight shiny spot on the edge, I think the screws cost around $12 and S&H to replace if you really want it perfect and new but it's never cut anything or been carried to my knowledge, I did splash coffee on the box...
*Traded2014 Traditional Forum knife, nicely figured narrow stag, unused but has some opening marks
Esee 3 Orange g10/ OD green blade, lightly used
Esee Avispa tan/satin, 2nd owner but bought 'NIB' and never used, very sharp, strong lockup
***TradedCold Steel mini recon 1 clip point, barely used, couple scuffs on coating
Kershaw cqc 5k, used and roughly sharpened
Kershaw s30v Blur, removed torsion bar, edge looks like it was roughly sharpened on diamond stones, many small chips, right thumb stud was sanded but I can't tell, small gouges in handles from disassemblyAl Mar Eagle, lightly used and carried, just had this professionally hand sharpened and it's unused since, the blade is better than new
Black G10 Grips by Kevin Wilkins for the large Benchmade Griptilian. There's a little scuff on the black aluminum backspacer but the g10 looks great/new to me. I just got these on the exchange and the feel great. http://wilkins-knives.com/wilkinsgrip-stocklist
Benchmade Rift, black g10, lightly used never sharpened, one light scratch on the blade
Benchmade 484 Nakamura, reground by Big Chris, cuts like a laser, awesome swedge
Benchmade Ritter Grip, amost LNIB, I set it down next to my Blur and knocked the edge slightly, there's just about a 1mm shiny spot
Benchmade Ritter Griptilian, used, black scales, s30v, this came with the Wilkins grips, (they've been separated) and it was reassembled by me. The clip is stripped. It has a polished edge. I think the blade was purposely rubbed with a light abrasive as the etchings are faded and there are light scratches in with the stonewash.
Benchmade 707, light use but the handle shows wear from a few drops
Spydercos:
***SoldDragonfly black frn vg10, sharpened out a small chip by the finger choil, no clip (I have knives with Spyderco for warranty, I may buy another clip)Ladybug Hawkbill, used and carried, lanyard hole has been stressed a little to accommodate a large key ring
***TradedBlack frn stretch, lightly used, sharpened
Super Blue Endura, lightly used, forced patina, I also had this professionally hand sharpened (Jason B, good work...)
***SoldBlack frn vg10 PE Endura, used, minor edge damageBlack DLC CE Endura, used and sharpened (wide bevel on PE portion)
***SoldMiniDyad Sprint, blue frn and vg10, bought new on the exchange, still unused, it has very slight damage to the tip, tiny and almost imperceptible, could have certainly left the factory this way ( you may not even notice but I see what looks like a spec of dust on the tip, under light)
***SoldMicrodyad mother of pearl, factory second (no box) with a botch mark on one bolster, plenty of scratches, blades in great shape
Micarta dyad jr, good condition, wear mostly to clip, very nice knife but I don't carry it, no box
***SoldJester grey G10 sprint, lightly used, sharpened
***GoneStacked wood Kopa, barely used, carried once, sharpened once, stacked wood handles slightly loose and could be glued but feel fine
***TradedSouthard, brown g10, used and sharpened, lanyard tube rattles
Gayle Bradley Folder, close to new condition with some scratches on the pocket clip, 'never cut anything' when I bought it, still hasn't
Brown frn XHP Native 3, bought on the exchange, very good condition, it's been sharpened, perfect lockup
***SOLDCaly 3.5 super blue sprint, I bought this one used with plenty of scratches, vertical blade play, a chip in the blade; I sent it in for resharpening and lost a little bit of steel from the edge (but it's even and I can finally sharpen it on a sharpmaker), some removed rust along the pivot area and some coloration left over
***TradedG10 Dragonfly, bought here on the exchange in very good condition, I haven't used it
***Traded S110v mule, New in unopened box
***TradedS110v mule with Halpern 3D natural micarta handles and a Kydex sheath w/ G-clip from SheathPro, barely used, storage marks on the sheath
***SoldChaparral, CF, XHP, barely used, needs to be sharpened as I started in at 30 degrees on a sharpmaker, didn't finish but nearly reprofiled
***SoldCruwear Military, lightly used and sharpened
***SoldSpyderco stainless kiwi lockback, old and discontinued but was preserved almost unused in someone else' collection, it looked carried only but I've used it lightly, no box
***SoldZero Tolerance CF0770, reprofiled and used, very sharp
***SoldBenchmade 710, very slight vertical lock rock, not enough to bother me it's just a bigger knife than I carry, lightly sharpened and used, very tip of blade is discolored
***SoldDPX H.E.S.T. 2.0, green G10 and black coated D2 blade, scratch in the blade coating, some faint wear in the coating, barely used never carried, scratch on the titanium, fun knife but I doubt I'll carry it
***SoldGEC 66 slim Calf roper in Gabon Ebony, 1095, California clip main blade, bought used on the exchange, very good condition
***SoldNorthwoods Norolk in ebony, lightly used with patina, started in sharpening at 30 degrees, haven't finished, it needs to be finished as it's not sharp right now
***SoldOld German Eye Moose, plain federal shield, "3 eye", light brown jigged bone, scratched bolsters have been sanded and left rough, need a little TLC, I bought this unused from a large collection, I have barely used it, perfect walk and talk
***SoldQueen Burke Stockman, Green Winterbottom Bone, (I believe it's bone but maybe Delrin), unusual jigging, very thin blades of Sandvik 12C27, it's in great condition, sanded bolsters as well, they look good
***Sold Winchester jigged bone wharncliffe swell center, black jigged bone shows lighter color on the edges, reddish, the pattern's almost identical to a Northwoods Norfolk, strong snap, main blade needs sharpening/ reprofiling, pen blade shows some wear
Case/ Bose Damascus Muskrat, 1 of 100 made, 154CM liners/bolsters and Devin Thomas Raindrop Damascus blades, Peach seed dark molasses jigged bone, unused but dropped twice resulting in small marks on the bolsters and backspring, these were removed/ repaired by Case leaving only small remnants of damage, looks great now. wharncliffe and California clip blades, each about 3 inches, would make an amazing user. info ----------> http://www.bladeforums.com/forums/s...-Damascus-Muskrat?highlight=case+bose+muskrat comes with suede pouch and box, the bone on mine is beautiful
If you're interested in a trade please send me a private message (the best option for me), email, or post here. I'll be back to check this thread periodically. I have basic photos of most of these knives,, upon request.
Thanks for looking.
Last edited:
