ZT 0560/0561 or ZT0630. Which one to buy and why?

kniferbro said:
And some people like to sit there and dream up every possible reason why a poster is wrong. For what reason I have no idea.

You are adding nothing to this thread. It is quite obvious form the OP's posts that he is not intending on "intentionally breaking" the knife. You are flexing just to flex.

Why do people care about safety ratings on a new car they are buying? When they ask the salesman about the safety features does the salesman reply "woah are you going to intentionally crash your car? You'd be much better suited with an armored car."

Maybe read more and post less. If you don't like a thread move on. OP isn't spreading misinformation, he has a simple inquiry. Answer or go away :)
Click to expand...

Maybe you could try to be less of an internet 'bro, and understand that folks will have differing opinions. You don't have to agree, but his description of what he plans to do with the knife would indeed fall into the abuse category. Don't like differing opinions, then maybe you should read less. :)

Heh, he said "flex".
 
Quiet said:
Maybe you could try to be less of an internet 'bro, and understand that folks will have differing opinions. You don't have to agree, but his description of what he plans to do with the knife would indeed fall into the abuse category. Don't like differing opinions, then maybe you should read less. :)
Click to expand...

Haha I knew the "bro" would be thrown in there, always seems that it does. Sorry, but I have no problems with different opinions. I have problems with people spreading false information though. Like you said before, OP is trying to "intentionally break his knife". I'd love for you to show me where he said anything like that. :)
 
kniferbro said:
Haha I knew the "bro" would be thrown in there, always seems that it does. Sorry, but I have no problems with different opinions. I have problems with people spreading false information though. Like you said before, OP is trying to "intentionally break his knife". I'd love for you to show me where he said anything like that. :)
Click to expand...

What false information am I spreading? That "prying, chopping, stabbing" are somehow entirely appropriate activities for a folder? Is that your contention? Here, let me help you out. FerFAL said:

FerFAL said:
...Then I expect them to handle some prying, chopping, stabbing, etc, within reason if ever needed...
FerFAL
Click to expand...

Those seem like good ways to damage or break a folding knife, but that's just me.
 
Wrong. Try again.

Quiet said:
Here's an idea, why not get one and NOT purposely try to break it?
Click to expand...


Where did the OP say that he that he is going to intentionally break the knife? Those things may be abusive in your opinion (I thought we were supposed to be tolerant of differing opinions?) but please point me to where he spoke about intentionally destroying his knife.


It sucks when you have to derail a thread to try and get some other guy to stop derailing it... :rolleyes:
 
The answers in the quote I expect it to handle those things" if I ever needed " then he was accused of getting a knife to intentionally break it . That was miss information and putting words in his mouth . I'm with knifebro , why do you feel the need to come one here and berate a person for asking a legitimate question on the forum . I see this a lot on here . And then y'all get together and make it seem like knifebro or I are starting trouble because we call you out on your bull****. Ad something useful or move on .
 
I suggest you stop the profanity in general, if you cant elaborate or articulate you position without the use of profanity I also suggest reading more and posting less. Discuss the topic not each other or your stay here at bladeforums may be a short one. Learn and follow the rules. have a nice day
panzeron said:
The answers in the quote I expect it to handle those things" if I ever needed " then he was accused of getting a knife to intentionally break it . That was miss information and putting words in his mouth . I'm with knifebro , why do you feel the need to come one here and berate a person for asking a legitimate question on the forum . I see this a lot on here . And then y'all get together and make it seem like knifebro or I are starting trouble because we call you out on your bull****. Ad something useful or move on .
Click to expand...
 
Last edited:
I don't own the 560 or the 630 . But I do own the 562cf .. that is one tough knife . I think you should consider . The cts-204p steel sharpens easily and holds it better than any other knife I own . I haven't put it to hard use , but it feels solid enough to take it , if called upon . It flips extremely well and closes just as sweet . After you past the detent , just jiggle it a little and it falls closed smooth and slowly . As if it is hydrolic. Maintenance is super easy . Just like a chris reeve sebenza. When you put it back together you don't have your fiddle with tuning it . Just tighten it up all the way . Perfectly centered and super smooth ..
 
Yeah , thanx for the warning .. and I didn't use any profanity . So again stop with putting words in other people's mouth ..
 
0562 is definitely an awesome blade. I would say better cutting performance than the 0560/1, due to the hieght of the grinds on the two, but still plenty thick to hold up to anything. :thumbup:

Worth considering!
 
wrong dude, you tried to hide the last portion of the word with stars.. real original. Its profanity whether your attempting to veil it or not. Read your own words. And I won't derail the thread any further because of you. good day.:)

panzeron said:
Yeah , thanx for the warning .. and I didn't use any profanity . So again stop with putting words in other people's mouth ..
Click to expand...
 
Last edited:
Let's try to steer the thread back on topic. Shiny, any experience with the 0560/1, 0630, or 0562? Even if you don't, what do you think about them in context to the OP's question?
 
kniferbro said:
Let's try to steer the thread back on topic. Shiny, any experience with the 0560/1, 0630, or 0562? Even if you don't, what do you think about them in context to the OP's question?
Click to expand...
I posted earlier in the thread I owned the 561 and sold it and I currently own the 620 and 630, my vote was for the 630.

I changed my 620cf into a drop point so it has a belly.
 
Ok right there ... I didn't cuss , but your implying that I insinuated a cuss word with stars . But you're gonna stand there and insinuate that I put a certain body part of mick's in my mouth . That's pretty vulgar ... what's wrong with you people .
 
shinyedges said:
I posted earlier in the thread I owned the 561 and sold it and I currently own the 620 and 630, my vote was for the 630.

I changed my 620cf into a drop point so it has a belly.
Click to expand...

.
Ok... just trying to get the thread up and going again through on topic discussion and some camaraderie. But if you're done with the thread then be done.
 
im cool, I was just saying I already contributed, im trying to save the thread as well.

really cant go wrong with either knife but I prefer the wave.
kniferbro said:
.
Ok... just trying to get the thread up and going again through on topic discussion and some camaraderie. But if you're done with the thread then be done.
Click to expand...
 
I have been eyeing that 630 though . That looks like one sweet blade . I am very happy with the performance of zt's s35vn on my 450 ..
 
shinyedges said:
im cool, I was just saying I already contributed, im trying to save the thread as well.

really cant go wrong with either knife but I prefer the wave.
Click to expand...


Ahhh my mistake. Sorry!

FerFAL, are you aware the Emerson collabs use the solid pivot bolt with a nut on one side? That to me is very appealing in a knife you may be beating on.
 
You must log in or register to reply here.
Back
Top